1/* 2 * (C) Copyright 2003 3 * Texas Instruments. 4 * Kshitij Gupta <kshitij@ti.com> 5 * Configuation settings for the TI OMAP Innovator board. 6 * 7 * (C) Copyright 2004 8 * ARM Ltd. 9 * Philippe Robin, <philippe.robin@arm.com> 10 * Configuration for Integrator AP board. 11 *. 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15#ifndef __CONFIG_H 16#define __CONFIG_H 17 18#include "integrator-common.h" 19 20/* Integrator/AP-specific configuration */ 21#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 22 23/* 24 * BOOTP options 25 */ 26#define CONFIG_BOOTP_BOOTFILESIZE 27#define CONFIG_BOOTP_BOOTPATH 28#define CONFIG_BOOTP_GATEWAY 29#define CONFIG_BOOTP_HOSTNAME 30 31 32/* 33 * Command line configuration. 34 */ 35#define CONFIG_BOOTDELAY 2 36#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" 37#define CONFIG_BOOTCOMMAND "" 38 39/* Flash settings */ 40#define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 41#define CONFIG_SYS_MAX_FLASH_SECT 128 42#define CONFIG_ENV_IS_NOWHERE 1 43#define CONFIG_ENV_SIZE 32768 44 45/*----------------------------------------------------------------------- 46 * PCI definitions 47 */ 48 49#define CONFIG_PCI 50#define CONFIG_CMD_PCI 51#define CONFIG_PCI_PNP 52 53#define CONFIG_TULIP 54#define CONFIG_EEPRO100 55#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 56 57 58/*----------------------------------------------------------------------- 59 * There are various dependencies on the core module (CM) fitted 60 * Users should refer to their CM user guide 61 * - when porting adjust u-boot/Makefile accordingly 62 * to define the necessary CONFIG_ s for the CM involved 63 * see e.g. integratorcp_CM926EJ-S_config 64 */ 65#include "armcoremodule.h" 66 67#endif /* __CONFIG_H */ 68