1/* 2 * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the MX35pdk Freescale board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13#ifndef __CONFIG_H 14#define __CONFIG_H 15 16#include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19#define CONFIG_MX35 20 21#define CONFIG_DISPLAY_CPUINFO 22#define CONFIG_SYS_FSL_CLK 23 24/* Set TEXT at the beginning of the NOR flash */ 25#define CONFIG_SYS_TEXT_BASE 0xA0000000 26 27#define CONFIG_BOARD_EARLY_INIT_F 28#define CONFIG_BOARD_LATE_INIT 29 30#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 31#define CONFIG_REVISION_TAG 32#define CONFIG_SETUP_MEMORY_TAGS 33#define CONFIG_INITRD_TAG 34 35/* 36 * Size of malloc() pool 37 */ 38#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 39 40/* 41 * Hardware drivers 42 */ 43#define CONFIG_SYS_I2C 44#define CONFIG_SYS_I2C_MXC 45#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 46#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 47#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 48#define CONFIG_MXC_SPI 49#define CONFIG_MXC_GPIO 50 51 52/* 53 * PMIC Configs 54 */ 55#define CONFIG_POWER 56#define CONFIG_POWER_I2C 57#define CONFIG_POWER_FSL 58#define CONFIG_POWER_FSL_MC13892 59#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 60#define CONFIG_RTC_MC13XXX 61 62/* 63 * MFD MC9SDZ60 64 */ 65#define CONFIG_FSL_MC9SDZ60 66#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 67 68/* 69 * UART (console) 70 */ 71#define CONFIG_MXC_UART 72#define CONFIG_MXC_UART_BASE UART1_BASE 73 74/* allow to overwrite serial and ethaddr */ 75#define CONFIG_ENV_OVERWRITE 76#define CONFIG_CONS_INDEX 1 77#define CONFIG_BAUDRATE 115200 78 79/* 80 * Command definition 81 */ 82#define CONFIG_OF_LIBFDT 83#define CONFIG_CMD_BOOTZ 84#define CONFIG_CMD_PING 85#define CONFIG_CMD_DHCP 86#define CONFIG_BOOTP_SUBNETMASK 87#define CONFIG_BOOTP_GATEWAY 88#define CONFIG_BOOTP_DNS 89 90#define CONFIG_CMD_NAND 91#define CONFIG_CMD_CACHE 92 93#define CONFIG_CMD_I2C 94#define CONFIG_CMD_SPI 95#define CONFIG_CMD_MII 96#define CONFIG_NET_RETRY_COUNT 100 97#define CONFIG_CMD_DATE 98 99#define CONFIG_CMD_USB 100#define CONFIG_USB_STORAGE 101#define CONFIG_CMD_MMC 102#define CONFIG_DOS_PARTITION 103#define CONFIG_EFI_PARTITION 104#define CONFIG_CMD_EXT2 105#define CONFIG_CMD_FAT 106 107#define CONFIG_BOOTDELAY 1 108 109#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 110 111/* 112 * Ethernet on the debug board (SMC911) 113 */ 114#define CONFIG_SMC911X 115#define CONFIG_SMC911X_16_BIT 1 116#define CONFIG_SMC911X_BASE CS5_BASE_ADDR 117 118#define CONFIG_HAS_ETH1 119#define CONFIG_ETHPRIME 120 121/* 122 * Ethernet on SOC (FEC) 123 */ 124#define CONFIG_FEC_MXC 125#define IMX_FEC_BASE FEC_BASE_ADDR 126#define CONFIG_FEC_MXC_PHYADDR 0x1F 127 128#define CONFIG_MII 129 130#define CONFIG_ARP_TIMEOUT 200UL 131 132/* 133 * Miscellaneous configurable options 134 */ 135#define CONFIG_SYS_LONGHELP /* undef to save memory */ 136#define CONFIG_CMDLINE_EDITING 137#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 138 139#define CONFIG_AUTO_COMPLETE 140#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 141#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 142#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 143 144#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 145#define CONFIG_SYS_MEMTEST_END 0x10000 146 147#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 148 149/* 150 * Physical Memory Map 151 */ 152#define CONFIG_NR_DRAM_BANKS 2 153#define PHYS_SDRAM_1 CSD0_BASE_ADDR 154#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 155#define PHYS_SDRAM_2 CSD1_BASE_ADDR 156#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) 157 158#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 159#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 160#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 161#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 162 GENERATED_GBL_DATA_SIZE) 163#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 164 CONFIG_SYS_GBL_DATA_OFFSET) 165 166/* 167 * MTD Command for mtdparts 168 */ 169#define CONFIG_CMD_MTDPARTS 170#define CONFIG_MTD_DEVICE 171#define CONFIG_FLASH_CFI_MTD 172#define CONFIG_MTD_PARTITIONS 173#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 174#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \ 175 "96m(root),8m(cfg),1938m(user);" \ 176 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" 177 178/* 179 * FLASH and environment organization 180 */ 181#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 182#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 183#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 184/* Monitor at beginning of flash */ 185#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 186#define CONFIG_SYS_MONITOR_LEN (512 * 1024) 187 188#define CONFIG_ENV_SECT_SIZE (128 * 1024) 189#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 190 191/* Address and size of Redundant Environment Sector */ 192#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 193#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 194 195#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 196 CONFIG_SYS_MONITOR_LEN) 197 198#define CONFIG_ENV_IS_IN_FLASH 199 200#if defined(CONFIG_FSL_ENV_IN_NAND) 201 #define CONFIG_ENV_IS_IN_NAND 202 #define CONFIG_ENV_OFFSET (1024 * 1024) 203#endif 204 205/* 206 * CFI FLASH driver setup 207 */ 208#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 209#define CONFIG_FLASH_CFI_DRIVER 210 211/* A non-standard buffered write algorithm */ 212#define CONFIG_FLASH_SPANSION_S29WS_N 213#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 214#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 215 216/* 217 * NAND FLASH driver setup 218 */ 219#define CONFIG_NAND_MXC 220#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 221#define CONFIG_SYS_MAX_NAND_DEVICE 1 222#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 223#define CONFIG_MXC_NAND_HWECC 224#define CONFIG_SYS_NAND_LARGEPAGE 225 226/* EHCI driver */ 227#define CONFIG_USB_EHCI 228#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 229#define CONFIG_EHCI_IS_TDI 230#define CONFIG_EHCI_HCD_INIT_AFTER_RESET 231#define CONFIG_USB_EHCI_MXC 232#define CONFIG_MXC_USB_PORT 0 233#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ 234 MXC_EHCI_POWER_PINS_ENABLED | \ 235 MXC_EHCI_OC_PIN_ACTIVE_LOW) 236#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) 237 238/* mmc driver */ 239#define CONFIG_MMC 240#define CONFIG_GENERIC_MMC 241#define CONFIG_FSL_ESDHC 242#define CONFIG_SYS_FSL_ESDHC_ADDR 0 243#define CONFIG_SYS_FSL_ESDHC_NUM 1 244 245/* 246 * Default environment and default scripts 247 * to update uboot and load kernel 248 */ 249 250#define CONFIG_HOSTNAME "mx35pdk" 251#define CONFIG_EXTRA_ENV_SETTINGS \ 252 "netdev=eth1\0" \ 253 "ethprime=smc911x\0" \ 254 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 255 "nfsroot=${serverip}:${rootpath}\0" \ 256 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 257 "addip_sta=setenv bootargs ${bootargs} " \ 258 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 259 ":${hostname}:${netdev}:off panic=1\0" \ 260 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 261 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 262 "else run addip_sta;fi\0" \ 263 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 264 "addtty=setenv bootargs ${bootargs}" \ 265 " console=ttymxc0,${baudrate}\0" \ 266 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 267 "loadaddr=80800000\0" \ 268 "kernel_addr_r=80800000\0" \ 269 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 270 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 271 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 272 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 273 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 274 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 275 "bootm ${kernel_addr}\0" \ 276 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 277 "run nfsargs addip addtty addmtd addmisc;" \ 278 "bootm ${kernel_addr_r}\0" \ 279 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 280 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 281 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 282 "load=tftp ${loadaddr} ${u-boot}\0" \ 283 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 284 "update=protect off ${uboot_addr} +80000;" \ 285 "erase ${uboot_addr} +80000;" \ 286 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 287 "upd=if run load;then echo Updating u-boot;if run update;" \ 288 "then echo U-Boot updated;" \ 289 "else echo Error updating u-boot !;" \ 290 "echo Board without bootloader !!;" \ 291 "fi;" \ 292 "else echo U-Boot not downloaded..exiting;fi\0" \ 293 "bootcmd=run net_nfs\0" 294 295#endif /* __CONFIG_H */ 296