LXR uboot/include/configs/omap3_evm_quick

   1/*
   2 * Configuration settings for quick boot from NAND on OMAP3 EVM.
   3 *
   4 * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
   5 *
   6 * Author :
   7 *     Sanjeev Premi <premi@ti.com>
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef __OMAP3_EVM_QUICK_NAND_H
  13#define __OMAP3_EVM_QUICK_NAND_H
  14
  15#include <asm/arch/cpu.h>
  16#include <asm/arch/omap.h>
  17
  18/* ----------------------------------------------------------------------------
  19 * Supported U-Boot commands
  20 * ----------------------------------------------------------------------------
  21 */
  22#define CONFIG_CMD_NAND
  23
  24/*
  25 * Board revision is detected by probing the Ethernet chip.
  26 *
  27 * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
  28 * this option can be removed. Generated binary is leaner by ~16Kbytes.
  29 */
  30
  31/* ----------------------------------------------------------------------------
  32 * Supported U-Boot features
  33 * ----------------------------------------------------------------------------
  34 */
  35#define CONFIG_SILENT_CONSOLE
  36#define CONFIG_ENV_IS_NOWHERE
  37
  38/* -----------------------------------------------------------------------------
  39 * Include common board configuration
  40 * -----------------------------------------------------------------------------
  41 */
  42#include "omap3_evm_common.h"
  43
  44/* -----------------------------------------------------------------------------
  45 * Default environment
  46 * -----------------------------------------------------------------------------
  47 */
  48#define CONFIG_BOOTDELAY        0
  49
  50#define CONFIG_EXTRA_ENV_SETTINGS       \
  51        "verify=no\0"                   \
  52        "silent=1"
  53
  54#define CONFIG_BOOTCOMMAND                              \
  55        "nandecc hw; "  \
  56        "nand read.i 0x80000000 280000 300000; "        \
  57        "bootm 0x80000000;"
  58
  59/*
  60 * Update the bootargs as necessary e.g. size of memory, partition and fstype
  61 */
  62#define CONFIG_BOOTARGS                         \
  63        "quiet "                        \
  64        "console=ttyO0,115200n8 "       \
  65        "mem=128M "                     \
  66        "noinitrd "                     \
  67        "root=/dev/mtdblock4 rw "       \
  68        "rootfstype=jffs2 "
  69
  70/*
  71 * SPL
  72 */
  73#define CONFIG_SPL_NAND_SIMPLE
  74#define CONFIG_SPL_NAND_SUPPORT
  75#define CONFIG_SPL_NAND_BASE
  76#define CONFIG_SPL_NAND_DRIVERS
  77#define CONFIG_SPL_NAND_ECC
  78#define CONFIG_SYS_NAND_5_ADDR_CYCLE
  79#define CONFIG_SYS_NAND_PAGE_COUNT      64
  80#define CONFIG_SYS_NAND_PAGE_SIZE       2048
  81#define CONFIG_SYS_NAND_OOBSIZE         64
  82#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  83#define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
  84#define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
  85                                                10, 11, 12, 13}
  86#define CONFIG_SYS_NAND_ECCSIZE         512
  87#define CONFIG_SYS_NAND_ECCBYTES        3
  88#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
  89#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
  90#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
  91
  92#endif /* __OMAP3_EVM_QUICK_NAND_H */
  93