1/* 2 * U-Boot - Configuration file for Bluetechnix TCM-BF518 board 3 */ 4 5#ifndef __CONFIG_TCM_BF518_H__ 6#define __CONFIG_TCM_BF518_H__ 7 8#include <asm/config-pre.h> 9 10 11/* 12 * Processor Settings 13 */ 14#define CONFIG_BFIN_CPU bf518-0.0 15#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA 16 17 18/* 19 * Clock Settings 20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV 21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV 22 */ 23/* CONFIG_CLKIN_HZ is any value in Hz */ 24#define CONFIG_CLKIN_HZ 25000000 25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ 26/* 1 = CLKIN / 2 */ 27#define CONFIG_CLKIN_HALF 0 28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ 29/* 1 = bypass PLL */ 30#define CONFIG_PLL_BYPASS 0 31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ 32/* Values can range from 0-63 (where 0 means 64) */ 33#define CONFIG_VCO_MULT 16 34/* CCLK_DIV controls the core clock divider */ 35/* Values can be 1, 2, 4, or 8 ONLY */ 36#define CONFIG_CCLK_DIV 1 37/* SCLK_DIV controls the system clock divider */ 38/* Values can range from 1-15 */ 39#define CONFIG_SCLK_DIV 4 40 41 42/* 43 * Memory Settings 44 */ 45/* This board has a 32meg MT48H16M16 */ 46#define CONFIG_MEM_ADD_WDTH 9 47#define CONFIG_MEM_SIZE 32 48 49#define CONFIG_EBIU_SDRRC_VAL 0x3f8 50#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd 51 52#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) 53#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) 54#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) 55 56#define CONFIG_SYS_MONITOR_LEN (512 * 1024) 57#define CONFIG_SYS_MALLOC_LEN (384 * 1024) 58 59 60/* 61 * Network Settings 62 */ 63#if !defined(__ADSPBF512__) && !defined(__ADSPBF514__) 64#define ADI_CMDS_NETWORK 1 65#define CONFIG_BFIN_MAC 66#define CONFIG_NETCONSOLE 1 67#endif 68#define CONFIG_HOSTNAME tcm-bf518 69 70/* 71 * Flash Settings 72 */ 73#define CONFIG_FLASH_CFI_DRIVER 74#define CONFIG_SYS_FLASH_BASE 0x20000000 75#define CONFIG_SYS_FLASH_CFI 76#define CONFIG_SYS_FLASH_PROTECTION 77#define CONFIG_SYS_MAX_FLASH_BANKS 1 78#define CONFIG_SYS_MAX_FLASH_SECT 19 79 80 81/* 82 * SPI Settings 83 */ 84#define CONFIG_BFIN_SPI 85#define CONFIG_ENV_SPI_MAX_HZ 30000000 86#define CONFIG_SF_DEFAULT_SPEED 30000000 87 88 89/* 90 * Env Storage Settings 91 */ 92#define CONFIG_ENV_IS_IN_FLASH 93#define CONFIG_ENV_OFFSET 0x8000 94#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) 95#define CONFIG_ENV_SIZE 0x2000 96#define CONFIG_ENV_SECT_SIZE 0x8000 97#define CONFIG_ENV_IS_EMBEDDED_IN_LDR 98 99 100/* 101 * I2C Settings 102 */ 103#define CONFIG_SYS_I2C 104#define CONFIG_SYS_I2C_ADI 105 106 107/* 108 * Misc Settings 109 */ 110#define CONFIG_BAUDRATE 115200 111#define CONFIG_RTC_BFIN 112#define CONFIG_UART_CONSOLE 0 113#define CONFIG_BOOTCOMMAND "run flashboot" 114#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" 115 116/* 117 * Pull in common ADI header for remaining command/environment setup 118 */ 119#include <configs/bfin_adi_common.h> 120 121#endif 122