1/* 2 * Configuation settings for the Renesas Solutions Migo-R board 3 * 4 * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9#ifndef __MIGO_R_H 10#define __MIGO_R_H 11 12#undef DEBUG 13#define CONFIG_CPU_SH7722 1 14#define CONFIG_MIGO_R 1 15 16#define CONFIG_CMD_SDRAM 17 18#define CONFIG_BAUDRATE 115200 19#define CONFIG_BOOTDELAY 3 20#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" 21 22#define CONFIG_VERSION_VARIABLE 23#undef CONFIG_SHOW_BOOT_PROGRESS 24 25/* SMC9111 */ 26#define CONFIG_SMC91111 27#define CONFIG_SMC91111_BASE (0xB0000000) 28 29/* MEMORY */ 30#define MIGO_R_SDRAM_BASE (0x8C000000) 31#define MIGO_R_FLASH_BASE_1 (0xA0000000) 32#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024) 33 34#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 35#define CONFIG_SYS_LONGHELP /* undef to save memory */ 36#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 37#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 38#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 39#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ 40#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ 41 42/* SCIF */ 43#define CONFIG_SCIF_CONSOLE 1 44#define CONFIG_CONS_SCIF0 1 45#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress display of console 46 information at boot */ 47#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 48#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE 49 50#define CONFIG_SYS_MEMTEST_START (MIGO_R_SDRAM_BASE) 51#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 52 53/* Enable alternate, more extensive, memory test */ 54#undef CONFIG_SYS_ALT_MEMTEST 55/* Scratch address used by the alternate memory test */ 56#undef CONFIG_SYS_MEMTEST_SCRATCH 57 58/* Enable temporary baudrate change while serial download */ 59#undef CONFIG_SYS_LOADS_BAUD_CHANGE 60 61#define CONFIG_SYS_SDRAM_BASE (MIGO_R_SDRAM_BASE) 62/* maybe more, but if so u-boot doesn't know about it... */ 63#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) 64/* default load address for scripts ?!? */ 65#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) 66 67/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ 68#define CONFIG_SYS_MONITOR_BASE (MIGO_R_FLASH_BASE_1) 69/* Monitor size */ 70#define CONFIG_SYS_MONITOR_LEN (128 * 1024) 71/* Size of DRAM reserved for malloc() use */ 72#define CONFIG_SYS_MALLOC_LEN (256 * 1024) 73#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 74 75/* FLASH */ 76#define CONFIG_SYS_FLASH_CFI 77#define CONFIG_FLASH_CFI_DRIVER 78#undef CONFIG_SYS_FLASH_QUIET_TEST 79/* print 'E' for empty sector on flinfo */ 80#define CONFIG_SYS_FLASH_EMPTY_INFO 81/* Physical start address of Flash memory */ 82#define CONFIG_SYS_FLASH_BASE (MIGO_R_FLASH_BASE_1) 83/* Max number of sectors on each Flash chip */ 84#define CONFIG_SYS_MAX_FLASH_SECT 512 85 86/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */ 87#define CONFIG_SYS_MAX_FLASH_BANKS 1 88#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) } 89 90/* Timeout for Flash erase operations (in ms) */ 91#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 92/* Timeout for Flash write operations (in ms) */ 93#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 94/* Timeout for Flash set sector lock bit operations (in ms) */ 95#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 96/* Timeout for Flash clear lock bit operations (in ms) */ 97#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 98 99/* Use hardware flash sectors protection instead of U-Boot software protection */ 100#undef CONFIG_SYS_FLASH_PROTECTION 101#undef CONFIG_SYS_DIRECT_FLASH_TFTP 102 103/* ENV setting */ 104#define CONFIG_ENV_IS_IN_FLASH 105#define CONFIG_ENV_OVERWRITE 1 106#define CONFIG_ENV_SECT_SIZE (128 * 1024) 107#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 108#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 109/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 110#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 111#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 112 113/* Board Clock */ 114#define CONFIG_SYS_CLK_FREQ 33333333 115#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 116#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 117#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ 118 119#endif /* __MIGO_R_H */ 120