1/* 2 * sbc8349.c -- WindRiver SBC8349 board support. 3 * Copyright (c) 2006-2007 Wind River Systems, Inc. 4 * 5 * Paul Gortmaker <paul.gortmaker@windriver.com> 6 * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11#include <common.h> 12#include <ioports.h> 13#include <mpc83xx.h> 14#include <asm/mpc8349_pci.h> 15#include <i2c.h> 16#include <spd_sdram.h> 17#include <miiphy.h> 18#if defined(CONFIG_OF_LIBFDT) 19#include <libfdt.h> 20#endif 21 22int fixed_sdram(void); 23void sdram_init(void); 24 25#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx) 26void ddr_enable_ecc(unsigned int dram_size); 27#endif 28 29#ifdef CONFIG_BOARD_EARLY_INIT_F 30int board_early_init_f (void) 31{ 32 return 0; 33} 34#endif 35 36#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) 37 38phys_size_t initdram (int board_type) 39{ 40 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 41 u32 msize = 0; 42 43 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 44 return -1; 45 46 /* DDR SDRAM - Main SODIMM */ 47 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 48#if defined(CONFIG_SPD_EEPROM) 49 msize = spd_sdram(); 50#else 51 msize = fixed_sdram(); 52#endif 53 /* 54 * Initialize SDRAM if it is on local bus. 55 */ 56 sdram_init(); 57 58#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 59 /* 60 * Initialize and enable DDR ECC. 61 */ 62 ddr_enable_ecc(msize * 1024 * 1024); 63#endif 64 /* return total bus SDRAM size(bytes) -- DDR */ 65 return (msize * 1024 * 1024); 66} 67 68#if !defined(CONFIG_SPD_EEPROM) 69/************************************************************************* 70 * fixed sdram init -- doesn't use serial presence detect. 71 ************************************************************************/ 72int fixed_sdram(void) 73{ 74 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 75 u32 msize = CONFIG_SYS_DDR_SIZE; 76 u32 ddr_size = msize << 20; /* DDR size in bytes */ 77 u32 ddr_size_log2 = __ilog2(msize); 78 79 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 80 im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 81 82#if (CONFIG_SYS_DDR_SIZE != 256) 83#warning Currently any ddr size other than 256 is not supported 84#endif 85 86#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) 87#warning Chip select bounds is only configurable in 16MB increments 88#endif 89 im->ddr.csbnds[2].csbnds = 90 ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | 91 (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> 92 CSBNDS_EA_SHIFT) & CSBNDS_EA); 93 im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; 94 95 /* currently we use only one CS, so disable the other banks */ 96 im->ddr.cs_config[0] = 0; 97 im->ddr.cs_config[1] = 0; 98 im->ddr.cs_config[3] = 0; 99 100 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 101 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 102 103 im->ddr.sdram_cfg = 104 SDRAM_CFG_SREN 105#if defined(CONFIG_DDR_2T_TIMING) 106 | SDRAM_CFG_2T_EN 107#endif 108 | SDRAM_CFG_SDRAM_TYPE_DDR1; 109#if defined (CONFIG_DDR_32BIT) 110 /* for 32-bit mode burst length is 8 */ 111 im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); 112#endif 113 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 114 115 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 116 udelay(200); 117 118 /* enable DDR controller */ 119 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 120 return msize; 121} 122#endif/*!CONFIG_SYS_SPD_EEPROM*/ 123 124 125int checkboard (void) 126{ 127 puts("Board: Wind River SBC834x\n"); 128 return 0; 129} 130 131/* 132 * if board is fitted with SDRAM 133 */ 134#if defined(CONFIG_SYS_BR2_PRELIM) \ 135 && defined(CONFIG_SYS_OR2_PRELIM) \ 136 && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \ 137 && defined(CONFIG_SYS_LBLAWAR2_PRELIM) 138/* 139 * Initialize SDRAM memory on the Local Bus. 140 */ 141 142void sdram_init(void) 143{ 144 volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; 145 volatile fsl_lbc_t *lbc = &immap->im_lbc; 146 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 147 148 puts("\n SDRAM on Local Bus: "); 149 print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); 150 151 /* 152 * Setup SDRAM Base and Option Registers, already done in cpu_init.c 153 */ 154 155 /* setup mtrpt, lsrt and lbcr for LB bus */ 156 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 157 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 158 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 159 asm("sync"); 160 161 /* 162 * Configure the SDRAM controller Machine Mode Register. 163 */ 164 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 165 166 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ 167 asm("sync"); 168 *sdram_addr = 0xff; 169 udelay(100); 170 171 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ 172 asm("sync"); 173 /*1 times*/ 174 *sdram_addr = 0xff; 175 udelay(100); 176 /*2 times*/ 177 *sdram_addr = 0xff; 178 udelay(100); 179 /*3 times*/ 180 *sdram_addr = 0xff; 181 udelay(100); 182 /*4 times*/ 183 *sdram_addr = 0xff; 184 udelay(100); 185 /*5 times*/ 186 *sdram_addr = 0xff; 187 udelay(100); 188 /*6 times*/ 189 *sdram_addr = 0xff; 190 udelay(100); 191 /*7 times*/ 192 *sdram_addr = 0xff; 193 udelay(100); 194 /*8 times*/ 195 *sdram_addr = 0xff; 196 udelay(100); 197 198 /* 0x58636733; mode register write operation */ 199 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; 200 asm("sync"); 201 *sdram_addr = 0xff; 202 udelay(100); 203 204 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 205 asm("sync"); 206 *sdram_addr = 0xff; 207 udelay(100); 208} 209#else 210void sdram_init(void) 211{ 212 puts(" SDRAM on Local Bus: Disabled in config\n"); 213} 214#endif 215 216#if defined(CONFIG_OF_BOARD_SETUP) 217int ft_board_setup(void *blob, bd_t *bd) 218{ 219 ft_cpu_setup(blob, bd); 220#ifdef CONFIG_PCI 221 ft_pci_setup(blob, bd); 222#endif 223 224 return 0; 225} 226#endif 227