1/* 2 * Configuation settings for the ESPT-GIGA board 3 * 4 * Copyright (C) 2008 Renesas Solutions Corp. 5 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10#ifndef __ESPT_H 11#define __ESPT_H 12 13#define CONFIG_CPU_SH7763 1 14#define CONFIG_ESPT 1 15#define __LITTLE_ENDIAN 1 16 17/* 18 * Command line configuration. 19 */ 20#define CONFIG_CMD_SDRAM 21#define CONFIG_CMD_ENV 22 23#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" 24#define CONFIG_ENV_OVERWRITE 1 25 26#undef CONFIG_SHOW_BOOT_PROGRESS 27 28/* SCIF */ 29#define CONFIG_SCIF_CONSOLE 1 30#define CONFIG_BAUDRATE 115200 31#define CONFIG_CONS_SCIF0 1 32 33#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 34#define CONFIG_SYS_LONGHELP /* undef to save memory */ 35#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 36#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 37#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 38#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments 39 passed to kernel */ 40#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate 41 settings for this board */ 42 43/* SDRAM */ 44#define CONFIG_SYS_SDRAM_BASE (0x8C000000) 45#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) 46#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 47#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 48 49/* Flash(NOR) S29JL064H */ 50#define CONFIG_SYS_FLASH_BASE (0xA0000000) 51#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) 52#define CONFIG_SYS_MAX_FLASH_BANKS (1) 53#define CONFIG_SYS_MAX_FLASH_SECT (150) 54 55/* U-Boot setting */ 56#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) 57#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 58#define CONFIG_SYS_MONITOR_LEN (128 * 1024) 59/* Size of DRAM reserved for malloc() use */ 60#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 61#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 62 63#define CONFIG_SYS_FLASH_CFI 64#define CONFIG_FLASH_CFI_DRIVER 65#undef CONFIG_SYS_FLASH_QUIET_TEST 66#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 67/* Timeout for Flash erase operations (in ms) */ 68#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 69/* Timeout for Flash write operations (in ms) */ 70#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 71/* Timeout for Flash set sector lock bit operations (in ms) */ 72#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 73/* Timeout for Flash clear lock bit operations (in ms) */ 74#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 75/* Use hardware flash sectors protection instead of U-Boot software protection */ 76#undef CONFIG_SYS_FLASH_PROTECTION 77#undef CONFIG_SYS_DIRECT_FLASH_TFTP 78#define CONFIG_ENV_IS_IN_FLASH 79#define CONFIG_ENV_SECT_SIZE (128 * 1024) 80#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 81#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) 82/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 83#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 84#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 85#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 86 87/* Clock */ 88#define CONFIG_SYS_CLK_FREQ 66666666 89#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 90#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 91#define CONFIG_SYS_TMU_CLK_DIV 4 92 93/* Ether */ 94#define CONFIG_SH_ETHER 1 95#define CONFIG_SH_ETHER_USE_PORT (1) 96#define CONFIG_SH_ETHER_PHY_ADDR (0x00) 97#define CONFIG_PHYLIB 98#define CONFIG_BITBANGMII 99#define CONFIG_BITBANGMII_MULTI 100#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII 101 102#endif /* __SH7763RDP_H */ 103