1
2
3
4
5
6
7#ifndef __CONFIGS_M28EVK_H__
8#define __CONFIGS_M28EVK_H__
9
10
11#define CONFIG_MX28
12#define MACH_TYPE_M28EVK 3613
13#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
14
15#define CONFIG_TIMESTAMP
16
17
18#define CONFIG_SYS_NO_FLASH
19#define CONFIG_DISPLAY_CPUINFO
20#define CONFIG_DOS_PARTITION
21#define CONFIG_FAT_WRITE
22
23#define CONFIG_CMD_BMP
24#define CONFIG_CMD_DATE
25#define CONFIG_CMD_EEPROM
26#define CONFIG_CMD_NAND
27#define CONFIG_CMD_NAND_TRIMFFS
28#define CONFIG_VIDEO
29
30
31#define CONFIG_NR_DRAM_BANKS 1
32#define PHYS_SDRAM_1 0x40000000
33#define PHYS_SDRAM_1_SIZE 0x20000000
34#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
35
36
37#define CONFIG_ENV_SIZE (16 * 1024)
38#define CONFIG_ENV_IS_IN_NAND
39
40
41#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
42#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
43#define CONFIG_ENV_SECT_SIZE (128 * 1024)
44#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
45#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE)
46#define CONFIG_ENV_OFFSET_REDUND \
47 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
48
49#define CONFIG_CMD_UBI
50#define CONFIG_CMD_UBIFS
51#define CONFIG_CMD_MTDPARTS
52#define CONFIG_RBTREE
53#define CONFIG_LZO
54#define CONFIG_MTD_DEVICE
55#define CONFIG_MTD_PARTITIONS
56#define MTDIDS_DEFAULT "nand0=gpmi-nand"
57#define MTDPARTS_DEFAULT \
58 "mtdparts=gpmi-nand:" \
59 "3m(u-boot)," \
60 "512k(env1)," \
61 "512k(env2)," \
62 "14m(boot)," \
63 "238m(data)," \
64 "-@4096k(UBI)"
65#else
66#define CONFIG_ENV_IS_NOWHERE
67#endif
68
69
70#ifdef CONFIG_CMD_NET
71#define CONFIG_FEC_MXC
72#endif
73
74
75#ifdef CONFIG_CMD_EEPROM
76#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
77#endif
78
79
80#ifdef CONFIG_CMD_DATE
81
82#define CONFIG_RTC_INTERNAL
83#ifdef CONFIG_RTC_INTERNAL
84#define CONFIG_RTC_MXS
85#else
86#define CONFIG_RTC_M41T62
87#define CONFIG_SYS_I2C_RTC_ADDR 0x68
88#define CONFIG_SYS_M41T11_BASE_YEAR 2000
89#endif
90#endif
91
92
93#ifdef CONFIG_CMD_USB
94#define CONFIG_EHCI_MXS_PORT0
95#define CONFIG_EHCI_MXS_PORT1
96#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
97#endif
98
99
100#ifdef CONFIG_CMD_SPI
101#define CONFIG_DEFAULT_SPI_BUS 2
102#define CONFIG_DEFAULT_SPI_CS 0
103#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
104
105
106#ifdef CONFIG_CMD_SF
107#define CONFIG_SF_DEFAULT_BUS 2
108#define CONFIG_SF_DEFAULT_CS 0
109#define CONFIG_SF_DEFAULT_SPEED 40000000
110#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
111
112#define CONFIG_ENV_SPI_BUS 2
113#define CONFIG_ENV_SPI_CS 0
114#define CONFIG_ENV_SPI_MAX_HZ 40000000
115#define CONFIG_ENV_SPI_MODE SPI_MODE_0
116#endif
117
118#endif
119
120
121#ifdef CONFIG_VIDEO
122#define CONFIG_VIDEO_LOGO
123#define CONFIG_SPLASH_SCREEN
124#define CONFIG_CMD_BMP
125#define CONFIG_BMP_16BPP
126#define CONFIG_VIDEO_BMP_RLE8
127#define CONFIG_VIDEO_BMP_GZIP
128#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
129#endif
130
131
132#define CONFIG_BOOTFILE "fitImage"
133#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
134#define CONFIG_BOOTCOMMAND "run mmc_mmc"
135#define CONFIG_LOADADDR 0x42000000
136#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
137
138
139#define CONFIG_PREBOOT "run try_bootscript"
140#define CONFIG_HOSTNAME m28evk
141
142#define CONFIG_EXTRA_ENV_SETTINGS \
143 "consdev=ttyAMA0\0" \
144 "baudrate=115200\0" \
145 "bootscript=boot.scr\0" \
146 "bootdev=/dev/mmcblk0p2\0" \
147 "rootdev=/dev/mmcblk0p3\0" \
148 "netdev=eth0\0" \
149 "hostname=m28evk\0" \
150 "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
151 "kernel_addr_r=0x42000000\0" \
152 "videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
153 "le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
154 "vmode:0\0" \
155 "update_nand_full_filename=u-boot.nand\0" \
156 "update_nand_firmware_filename=u-boot.sb\0" \
157 "update_sd_firmware_filename=u-boot.sd\0" \
158 "update_nand_firmware_maxsz=0x100000\0" \
159 "update_nand_stride=0x40\0" \
160 "update_nand_count=0x4\0" \
161 "update_nand_get_fcb_size=" \
162 "nand device 0 ; " \
163 "nand info ; " \
164 "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
165 "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
166 "update_nand_full=" \
167 "if tftp ${update_nand_full_filename} ; then " \
168 "run update_nand_get_fcb_size ; " \
169 "nand scrub -y 0x0 ${filesize} ; " \
170 "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
171 "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
172 "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
173 "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
174 "fi\0" \
175 "update_nand_firmware=" \
176 "if tftp ${update_nand_firmware_filename} ; then " \
177 "run update_nand_get_fcb_size ; " \
178 "setexpr fcb_sz ${update_nand_fcb} * 2 ; " \
179 "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
180 "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
181 "nand erase ${fcb_sz} ${fw_sz} ; " \
182 "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
183 "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
184 "fi\0" \
185 "update_sd_firmware=" \
186 "if mmc rescan ; then " \
187 "if tftp ${update_sd_firmware_filename} ; then " \
188 "setexpr fw_sz ${filesize} / 0x200 ; " \
189 "setexpr fw_sz ${fw_sz} + 1 ; " \
190 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
191 "fi ; " \
192 "fi\0" \
193 "addcons=" \
194 "setenv bootargs ${bootargs} " \
195 "console=${consdev},${baudrate}\0" \
196 "addip=" \
197 "setenv bootargs ${bootargs} " \
198 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
199 "${netmask}:${hostname}:${netdev}:off\0" \
200 "addmisc=" \
201 "setenv bootargs ${bootargs} ${miscargs}\0" \
202 "adddfltmtd=" \
203 "if test \"x${mtdparts}\" == \"x\" ; then " \
204 "mtdparts default ; " \
205 "fi\0" \
206 "addmtd=" \
207 "run adddfltmtd ; " \
208 "setenv bootargs ${bootargs} ${mtdparts}\0" \
209 "addargs=run addcons addmtd addmisc\0" \
210 "mmcload=" \
211 "mmc rescan ; " \
212 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
213 "ubiload=" \
214 "ubi part UBI ; ubifsmount ubi0:rootfs ; " \
215 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
216 "netload=" \
217 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
218 "miscargs=nohlt panic=1\0" \
219 "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
220 "ubiargs=" \
221 "setenv bootargs ubi.mtd=5 " \
222 "root=ubi0:rootfs rootfstype=ubifs\0" \
223 "nfsargs=" \
224 "setenv bootargs root=/dev/nfs rw " \
225 "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
226 "mmc_mmc=" \
227 "run mmcload mmcargs addargs ; " \
228 "bootm ${kernel_addr_r}\0" \
229 "mmc_ubi=" \
230 "run mmcload ubiargs addargs ; " \
231 "bootm ${kernel_addr_r}\0" \
232 "mmc_nfs=" \
233 "run mmcload nfsargs addip addargs ; " \
234 "bootm ${kernel_addr_r}\0" \
235 "ubi_mmc=" \
236 "run ubiload mmcargs addargs ; " \
237 "bootm ${kernel_addr_r}\0" \
238 "ubi_ubi=" \
239 "run ubiload ubiargs addargs ; " \
240 "bootm ${kernel_addr_r}\0" \
241 "ubi_nfs=" \
242 "run ubiload nfsargs addip addargs ; " \
243 "bootm ${kernel_addr_r}\0" \
244 "net_mmc=" \
245 "run netload mmcargs addargs ; " \
246 "bootm ${kernel_addr_r}\0" \
247 "net_ubi=" \
248 "run netload ubiargs addargs ; " \
249 "bootm ${kernel_addr_r}\0" \
250 "net_nfs=" \
251 "run netload nfsargs addip addargs ; " \
252 "bootm ${kernel_addr_r}\0" \
253 "try_bootscript=" \
254 "mmc rescan;" \
255 "if test -e mmc 0:2 ${bootscript} ; then " \
256 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
257 "then ; " \
258 "echo Running bootscript... ; " \
259 "source ${kernel_addr_r} ; " \
260 "fi ; " \
261 "fi\0"
262
263
264#include <configs/mxs.h>
265
266#endif
267
