1/* 2 * Copyright 2015 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#ifndef __FSL_SECURE_BOOT_H 8#define __FSL_SECURE_BOOT_H 9 10#ifdef CONFIG_SECURE_BOOT 11 12#ifndef CONFIG_FIT_SIGNATURE 13#define CONFIG_CHAIN_OF_TRUST 14#endif 15 16#endif 17 18#ifdef CONFIG_CHAIN_OF_TRUST 19#define CONFIG_CMD_ESBC_VALIDATE 20#define CONFIG_FSL_SEC_MON 21#define CONFIG_SHA_HW_ACCEL 22#define CONFIG_SHA_PROG_HW_ACCEL 23#define CONFIG_RSA_FREESCALE_EXP 24 25#ifndef CONFIG_FSL_CAAM 26#define CONFIG_FSL_CAAM 27#endif 28 29#define CONFIG_SPL_BOARD_INIT 30#ifdef CONFIG_SPL_BUILD 31/* 32 * Define the key hash for U-Boot here if public/private key pair used to 33 * sign U-boot are different from the SRK hash put in the fuse 34 * Example of defining KEY_HASH is 35 * #define CONFIG_SPL_UBOOT_KEY_HASH \ 36 * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" 37 * else leave it defined as NULL 38 */ 39 40#define CONFIG_SPL_UBOOT_KEY_HASH NULL 41#endif /* ifdef CONFIG_SPL_BUILD */ 42 43#ifndef CONFIG_SPL_BUILD 44#define CONFIG_CMD_BLOB 45#define CONFIG_CMD_HASH 46#define CONFIG_KEY_REVOCATION 47#ifndef CONFIG_SYS_RAMBOOT 48/* The key used for verification of next level images 49 * is picked up from an Extension Table which has 50 * been verified by the ISBC (Internal Secure boot Code) 51 * in boot ROM of the SoC. 52 * The feature is only applicable in case of NOR boot and is 53 * not applicable in case of RAMBOOT (NAND, SD, SPI). 54 */ 55#ifndef CONFIG_ESBC_HDR_LS 56/* Current Key EXT feature not available in LS ESBC Header */ 57#define CONFIG_FSL_ISBC_KEY_EXT 58#endif 59 60#endif 61 62#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) 63/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit 64 * Similiarly for LS2080 65 */ 66#define CONFIG_ESBC_ADDR_64BIT 67#endif 68 69#ifdef CONFIG_LS2080A 70#define CONFIG_EXTRA_ENV \ 71 "setenv fdt_high 0xa0000000;" \ 72 "setenv initrd_high 0xcfffffff;" \ 73 "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';" 74#else 75#define CONFIG_EXTRA_ENV \ 76 "setenv fdt_high 0xffffffff;" \ 77 "setenv initrd_high 0xffffffff;" \ 78 "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';" 79#endif 80 81/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from 82 * Non-XIP Memory (Nand/SD)*/ 83#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) || \ 84 defined(CONFIG_SD_BOOT) 85#define CONFIG_BOOTSCRIPT_COPY_RAM 86#endif 87/* The address needs to be modified according to NOR, NAND, SD and 88 * DDR memory map 89 */ 90#ifdef CONFIG_LS2080A 91#define CONFIG_BS_HDR_ADDR_DEVICE 0x583920000 92#define CONFIG_BS_ADDR_DEVICE 0x583900000 93#define CONFIG_BS_HDR_ADDR_RAM 0xa3920000 94#define CONFIG_BS_ADDR_RAM 0xa3900000 95#define CONFIG_BS_HDR_SIZE 0x00002000 96#define CONFIG_BS_SIZE 0x00001000 97#else 98#ifdef CONFIG_SD_BOOT 99/* For SD boot address and size are assigned in terms of sector 100 * offset and no. of sectors respectively. 101 */ 102#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800 103#define CONFIG_BS_ADDR_DEVICE 0x00000840 104#define CONFIG_BS_HDR_SIZE 0x00000010 105#define CONFIG_BS_SIZE 0x00000008 106#else 107#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 108#define CONFIG_BS_ADDR_DEVICE 0x60060000 109#define CONFIG_BS_HDR_SIZE 0x00002000 110#define CONFIG_BS_SIZE 0x00001000 111#endif /* #ifdef CONFIG_SD_BOOT */ 112#define CONFIG_BS_HDR_ADDR_RAM 0x81000000 113#define CONFIG_BS_ADDR_RAM 0x81020000 114#endif 115 116#ifdef CONFIG_BOOTSCRIPT_COPY_RAM 117#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM 118#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM 119#else 120#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE 121/* BOOTSCRIPT_ADDR is not required */ 122#endif 123 124#ifdef CONFIG_FSL_LS_PPA 125#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP 126#ifdef CONFIG_LS1043A 127#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000 128#endif 129#else 130#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" 131#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */ 132 133/* Define the key hash here if SRK used for signing PPA image is 134 * different from SRK hash put in SFP used for U-Boot. 135 * Example 136 * #define CONFIG_PPA_KEY_HASH \ 137 * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" 138 */ 139#define CONFIG_PPA_KEY_HASH NULL 140#endif /* ifdef CONFIG_FSL_LS_PPA */ 141 142#include <config_fsl_chain_trust.h> 143#endif /* #ifndef CONFIG_SPL_BUILD */ 144#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ 145#endif 146