/*
 * (C) Copyright 2010-2015
 * NVIDIA Corporation <www.nvidia.com>
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

/* Tegra30 Clock control functions */

#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/timer.h>
#include <div64.h>
#include <fdtdec.h>

/*
 * Clock types that we can use as a source. The Tegra30 has muxes for the
 * peripheral clocks, and in most cases there are four options for the clock
 * source. This gives us a clock 'type' and exploits what commonality exists
 * in the device.
 *
 * Letters are obvious, except for T which means CLK_M, and S which means the
 * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
 * datasheet) and PLL_M are different things. The former is the basic
 * clock supplied to the SOC from an external oscillator. The latter is the
 * memory clock PLL.
 *
 * See definitions in clock_id in the header file.
 */
enum clock_type_id {
        CLOCK_TYPE_AXPT,        /* PLL_A, PLL_X, PLL_P, CLK_M */
        CLOCK_TYPE_MCPA,        /* and so on */
        CLOCK_TYPE_MCPT,
        CLOCK_TYPE_PCM,
        CLOCK_TYPE_PCMT,
        CLOCK_TYPE_PCMT16,
        CLOCK_TYPE_PDCT,
        CLOCK_TYPE_ACPT,
        CLOCK_TYPE_ASPTE,
        CLOCK_TYPE_PMDACD2T,
        CLOCK_TYPE_PCST,

        CLOCK_TYPE_COUNT,
        CLOCK_TYPE_NONE = -1,   /* invalid clock type */
};

enum {
        CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
};

/*
 * Clock source mux for each clock type. This just converts our enum into
 * a list of mux sources for use by the code.
 *
 * Note:
 *  The extra column in each clock source array is used to store the mask
 *  bits in its register for the source.
 */
#define CLK(x) CLOCK_ID_ ## x
static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
        { CLK(AUDIO),   CLK(XCPU),      CLK(PERIPH),    CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(AUDIO),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(NONE),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(PERIPH),  CLK(DISPLAY),   CLK(CGENERAL),  CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(AUDIO),   CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_30},
        { CLK(AUDIO),   CLK(SFROM32KHZ),        CLK(PERIPH),   CLK(OSC),
                CLK(EPCI),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_29},
        { CLK(PERIPH),  CLK(MEMORY),    CLK(DISPLAY),   CLK(AUDIO),
                CLK(CGENERAL),  CLK(DISPLAY2),  CLK(OSC),       CLK(NONE),
                MASK_BITS_31_29},
        { CLK(PERIPH),  CLK(CGENERAL),  CLK(SFROM32KHZ), CLK(OSC),
                CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
                MASK_BITS_31_28}
};

/*
 * Clock type for each peripheral clock source. We put the name in each
 * record just so it is easy to match things up
 */
#define TYPE(name, type) type
static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
        /* 0x00 */
        TYPE(PERIPHC_I2S1,      CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_I2S2,      CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_SPDIF_IN,  CLOCK_TYPE_PCM),
        TYPE(PERIPHC_PWM,       CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SBC2,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_SBC3,      CLOCK_TYPE_PCMT),

        /* 0x08 */
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_I2C1,      CLOCK_TYPE_PCMT16),
        TYPE(PERIPHC_DVC_I2C,   CLOCK_TYPE_PCMT16),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SBC1,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_DISP1,     CLOCK_TYPE_PMDACD2T),
        TYPE(PERIPHC_DISP2,     CLOCK_TYPE_PMDACD2T),

        /* 0x10 */
        TYPE(PERIPHC_CVE,       CLOCK_TYPE_PDCT),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_VI,        CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SDMMC1,    CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_SDMMC2,    CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_G3D,       CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_G2D,       CLOCK_TYPE_MCPA),

        /* 0x18 */
        TYPE(PERIPHC_NDFLASH,   CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_SDMMC4,    CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_VFIR,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_EPP,       CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_MPE,       CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_MIPI,      CLOCK_TYPE_PCMT),       /* MIPI base-band HSI */
        TYPE(PERIPHC_UART1,     CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_UART2,     CLOCK_TYPE_PCMT),

        /* 0x20 */
        TYPE(PERIPHC_HOST1X,    CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_TVO,       CLOCK_TYPE_PDCT),
        TYPE(PERIPHC_HDMI,      CLOCK_TYPE_PMDACD2T),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_TVDAC,     CLOCK_TYPE_PDCT),
        TYPE(PERIPHC_I2C2,      CLOCK_TYPE_PCMT16),
        TYPE(PERIPHC_EMC,       CLOCK_TYPE_MCPT),

        /* 0x28 */
        TYPE(PERIPHC_UART3,     CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_VI,        CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SBC4,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_I2C3,      CLOCK_TYPE_PCMT16),
        TYPE(PERIPHC_SDMMC3,    CLOCK_TYPE_PCMT),

        /* 0x30 */
        TYPE(PERIPHC_UART4,     CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_UART5,     CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_VDE,       CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_OWR,       CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_NOR,       CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_CSITE,     CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_I2S0,      CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),

        /* 0x38h */          /* Jumps to reg offset 0x3B0h - new for T30 */
        TYPE(PERIPHC_G3D2,      CLOCK_TYPE_MCPA),
        TYPE(PERIPHC_MSELECT,   CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_TSENSOR,   CLOCK_TYPE_PCST),       /* s/b PCTS */
        TYPE(PERIPHC_I2S3,      CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_I2S4,      CLOCK_TYPE_AXPT),
        TYPE(PERIPHC_I2C4,      CLOCK_TYPE_PCMT16),
        TYPE(PERIPHC_SBC5,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_SBC6,      CLOCK_TYPE_PCMT),

        /* 0x40 */
        TYPE(PERIPHC_AUDIO,     CLOCK_TYPE_ACPT),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_DAM0,      CLOCK_TYPE_ACPT),
        TYPE(PERIPHC_DAM1,      CLOCK_TYPE_ACPT),
        TYPE(PERIPHC_DAM2,      CLOCK_TYPE_ACPT),
        TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_ACTMON,    CLOCK_TYPE_PCST),       /* MASK 31:30 */
        TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),

        /* 0x48 */
        TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
        TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
        TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_I2CSLOW,   CLOCK_TYPE_PCST),       /* MASK 31:30 */
        TYPE(PERIPHC_SYS,       CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SPEEDO,    CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),

        /* 0x50 */
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
        TYPE(PERIPHC_SATAOOB,   CLOCK_TYPE_PCMT),       /* offset 0x420h */
        TYPE(PERIPHC_SATA,      CLOCK_TYPE_PCMT),
        TYPE(PERIPHC_HDA,       CLOCK_TYPE_PCMT),
};

/*
 * This array translates a periph_id to a periphc_internal_id
 *
 * Not present/matched up:
 *      uint vi_sensor;  _VI_SENSOR_0,          0x1A8
 *      SPDIF - which is both 0x08 and 0x0c
 *
 */
#define NONE(name) (-1)
#define OFFSET(name, value) PERIPHC_ ## name
static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
        /* Low word: 31:0 */
        NONE(CPU),
        NONE(COP),
        NONE(TRIGSYS),
        NONE(RESERVED3),
        NONE(RESERVED4),
        NONE(TMR),
        PERIPHC_UART1,
        PERIPHC_UART2,  /* and vfir 0x68 */

        /* 8 */
        NONE(GPIO),
        PERIPHC_SDMMC2,
        NONE(SPDIF),        /* 0x08 and 0x0c, unclear which to use */
        PERIPHC_I2S1,
        PERIPHC_I2C1,
        PERIPHC_NDFLASH,
        PERIPHC_SDMMC1,
        PERIPHC_SDMMC4,

        /* 16 */
        NONE(RESERVED16),
        PERIPHC_PWM,
        PERIPHC_I2S2,
        PERIPHC_EPP,
        PERIPHC_VI,
        PERIPHC_G2D,
        NONE(USBD),
        NONE(ISP),

        /* 24 */
        PERIPHC_G3D,
        NONE(RESERVED25),
        PERIPHC_DISP2,
        PERIPHC_DISP1,
        PERIPHC_HOST1X,
        NONE(VCP),
        PERIPHC_I2S0,
        NONE(CACHE2),

        /* Middle word: 63:32 */
        NONE(MEM),
        NONE(AHBDMA),
        NONE(APBDMA),
        NONE(RESERVED35),
        NONE(RESERVED36),
        NONE(STAT_MON),
        NONE(RESERVED38),
        NONE(RESERVED39),

        /* 40 */
        NONE(KFUSE),
        PERIPHC_SBC1,
        PERIPHC_NOR,
        NONE(RESERVED43),
        PERIPHC_SBC2,
        NONE(RESERVED45),
        PERIPHC_SBC3,
        PERIPHC_DVC_I2C,

        /* 48 */
        NONE(DSI),
        PERIPHC_TVO,    /* also CVE 0x40 */
        PERIPHC_MIPI,
        PERIPHC_HDMI,
        NONE(CSI),
        PERIPHC_TVDAC,
        PERIPHC_I2C2,
        PERIPHC_UART3,

        /* 56 */
        NONE(RESERVED56),
        PERIPHC_EMC,
        NONE(USB2),
        NONE(USB3),
        PERIPHC_MPE,
        PERIPHC_VDE,
        NONE(BSEA),
        NONE(BSEV),

        /* Upper word 95:64 */
        PERIPHC_SPEEDO,
        PERIPHC_UART4,
        PERIPHC_UART5,
        PERIPHC_I2C3,
        PERIPHC_SBC4,
        PERIPHC_SDMMC3,
        NONE(PCIE),
        PERIPHC_OWR,

        /* 72 */
        NONE(AFI),
        PERIPHC_CSITE,
        NONE(PCIEXCLK),
        NONE(AVPUCQ),
        NONE(RESERVED76),
        NONE(RESERVED77),
        NONE(RESERVED78),
        NONE(DTV),

        /* 80 */
        PERIPHC_NANDSPEED,
        PERIPHC_I2CSLOW,
        NONE(DSIB),
        NONE(RESERVED83),
        NONE(IRAMA),
        NONE(IRAMB),
        NONE(IRAMC),
        NONE(IRAMD),

        /* 88 */
        NONE(CRAM2),
        NONE(RESERVED89),
        NONE(MDOUBLER),
        NONE(RESERVED91),
        NONE(SUSOUT),
        NONE(RESERVED93),
        NONE(RESERVED94),
        NONE(RESERVED95),

        /* V word: 31:0 */
        NONE(CPUG),
        NONE(CPULP),
        PERIPHC_G3D2,
        PERIPHC_MSELECT,
        PERIPHC_TSENSOR,
        PERIPHC_I2S3,
        PERIPHC_I2S4,
        PERIPHC_I2C4,

        /* 08 */
        PERIPHC_SBC5,
        PERIPHC_SBC6,
        PERIPHC_AUDIO,
        NONE(APBIF),
        PERIPHC_DAM0,
        PERIPHC_DAM1,
        PERIPHC_DAM2,
        PERIPHC_HDA2CODEC2X,

        /* 16 */
        NONE(ATOMICS),
        NONE(RESERVED17),
        NONE(RESERVED18),
        NONE(RESERVED19),
        NONE(RESERVED20),
        NONE(RESERVED21),
        NONE(RESERVED22),
        PERIPHC_ACTMON,

        /* 24 */
        NONE(RESERVED24),
        NONE(RESERVED25),
        NONE(RESERVED26),
        NONE(RESERVED27),
        PERIPHC_SATA,
        PERIPHC_HDA,
        NONE(RESERVED30),
        NONE(RESERVED31),

        /* W word: 31:0 */
        NONE(HDA2HDMICODEC),
        NONE(SATACOLD),
        NONE(RESERVED0_PCIERX0),
        NONE(RESERVED1_PCIERX1),
        NONE(RESERVED2_PCIERX2),
        NONE(RESERVED3_PCIERX3),
        NONE(RESERVED4_PCIERX4),
        NONE(RESERVED5_PCIERX5),

        /* 40 */
        NONE(CEC),
        NONE(RESERVED6_PCIE2),
        NONE(RESERVED7_EMC),
        NONE(RESERVED8_HDMI),
        NONE(RESERVED9_SATA),
        NONE(RESERVED10_MIPI),
        NONE(EX_RESERVED46),
        NONE(EX_RESERVED47),
};

/*
 * PLL divider shift/mask tables for all PLL IDs.
 */
struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
        /*
         * T30: some deviations from T2x.
         * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
         *       If lock_ena or lock_det are >31, they're not used in that PLL.
         */

        { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 20, .p_mask = 0x0F,
          .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 },   /* PLLC */
        { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF,  .p_shift = 0,  .p_mask = 0,
          .lock_ena = 0,  .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },     /* PLLM */
        { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
          .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */
        { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
          .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLA */
        { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
          .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLU */
        { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
          .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLD */
        { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 20, .p_mask = 0x0F,
          .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 0, .kvco_mask = 0 },   /* PLLX */
        { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF,  .p_shift = 0,  .p_mask = 0,
          .lock_ena = 9,  .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 },     /* PLLE */
        { .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
          .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLS (RESERVED) */
};

/*
 * Get the oscillator frequency, from the corresponding hardware configuration
 * field. Note that T30 supports 3 new higher freqs, but we map back
 * to the old T20 freqs. Support for the higher oscillators is TBD.
 */
enum clock_osc_freq clock_get_osc_freq(void)
{
        struct clk_rst_ctlr *clkrst =
                        (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
        u32 reg;

        reg = readl(&clkrst->crc_osc_ctrl);
        reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;

        if (reg & 1)                    /* one of the newer freqs */
                printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);

        return reg >> 2;        /* Map to most common (T20) freqs */
}

/* Returns a pointer to the clock source register for a peripheral */
u32 *get_periph_source_reg(enum periph_id periph_id)
{
        struct clk_rst_ctlr *clkrst =
                (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
        enum periphc_internal_id internal_id;

        /* Coresight is a special case */
        if (periph_id == PERIPH_ID_CSI)
                return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];

        assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
        internal_id = periph_id_to_internal_id[periph_id];
        assert(internal_id != -1);
        if (internal_id >= PERIPHC_VW_FIRST) {
                internal_id -= PERIPHC_VW_FIRST;
                return &clkrst->crc_clk_src_vw[internal_id];
        } else
                return &clkrst->crc_clk_src[internal_id];
}

int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
                          int *divider_bits, int *type)
{
        enum periphc_internal_id internal_id;

        if (!clock_periph_id_isvalid(periph_id))
                return -1;

        internal_id = periph_id_to_internal_id[periph_id];
        if (!periphc_internal_id_isvalid(internal_id))
                return -1;

        *type = clock_periph_type[internal_id];
        if (!clock_type_id_isvalid(*type))
                return -1;

        *mux_bits = clock_source[*type][CLOCK_MAX_MUX];

        if (*type == CLOCK_TYPE_PCMT16)
                *divider_bits = 16;
        else
                *divider_bits = 8;

        return 0;
}

enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
{
        enum periphc_internal_id internal_id;
        int type;

        if (!clock_periph_id_isvalid(periph_id))
                return CLOCK_ID_NONE;

        internal_id = periph_id_to_internal_id[periph_id];
        if (!periphc_internal_id_isvalid(internal_id))
                return CLOCK_ID_NONE;

        type = clock_periph_type[internal_id];
        if (!clock_type_id_isvalid(type))
                return CLOCK_ID_NONE;

        return clock_source[type][source];
}

/**
 * Given a peripheral ID and the required source clock, this returns which
 * value should be programmed into the source mux for that peripheral.
 *
 * There is special code here to handle the one source type with 5 sources.
 *
 * @param periph_id     peripheral to start
 * @param source        PLL id of required parent clock
 * @param mux_bits      Set to number of bits in mux register: 2 or 4
 * @param divider_bits  Set to number of divider bits (8 or 16)
 * @return mux value (0-4, or -1 if not found)
 */
int get_periph_clock_source(enum periph_id periph_id,
        enum clock_id parent, int *mux_bits, int *divider_bits)
{
        enum clock_type_id type;
        int mux, err;

        err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
        assert(!err);

        for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
                if (clock_source[type][mux] == parent)
                        return mux;

        /* if we get here, either us or the caller has made a mistake */
        printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
                parent);
        return -1;
}

void clock_set_enable(enum periph_id periph_id, int enable)
{
        struct clk_rst_ctlr *clkrst =
                        (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
        u32 *clk;
        u32 reg;

        /* Enable/disable the clock to this peripheral */
        assert(clock_periph_id_isvalid(periph_id));
        if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
                clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
        else
                clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
        reg = readl(clk);
        if (enable)
                reg |= PERIPH_MASK(periph_id);
        else
                reg &= ~PERIPH_MASK(periph_id);
        writel(reg, clk);
}

void reset_set_enable(enum periph_id periph_id, int enable)
{
        struct clk_rst_ctlr *clkrst =
                        (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
        u32 *reset;
        u32 reg;

        /* Enable/disable reset to the peripheral */
        assert(clock_periph_id_isvalid(periph_id));
        if (periph_id < PERIPH_ID_VW_FIRST)
                reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
        else
                reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
        reg = readl(reset);
        if (enable)
                reg |= PERIPH_MASK(periph_id);
        else
                reg &= ~PERIPH_MASK(periph_id);
        writel(reg, reset);
}

#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
 * Convert a device tree clock ID to our peripheral ID. They are mostly
 * the same but we are very cautious so we check that a valid clock ID is
 * provided.
 *
 * @param clk_id        Clock ID according to tegra30 device tree binding
 * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
 */
enum periph_id clk_id_to_periph_id(int clk_id)
{
        if (clk_id > PERIPH_ID_COUNT)
                return PERIPH_ID_NONE;

        switch (clk_id) {
        case PERIPH_ID_RESERVED3:
        case PERIPH_ID_RESERVED4:
        case PERIPH_ID_RESERVED16:
        case PERIPH_ID_RESERVED24:
        case PERIPH_ID_RESERVED35:
        case PERIPH_ID_RESERVED43:
        case PERIPH_ID_RESERVED45:
        case PERIPH_ID_RESERVED56:
        case PERIPH_ID_PCIEXCLK:
        case PERIPH_ID_RESERVED76:
        case PERIPH_ID_RESERVED77:
        case PERIPH_ID_RESERVED78:
        case PERIPH_ID_RESERVED83:
        case PERIPH_ID_RESERVED89:
        case PERIPH_ID_RESERVED91:
        case PERIPH_ID_RESERVED93:
        case PERIPH_ID_RESERVED94:
        case PERIPH_ID_RESERVED95:
                return PERIPH_ID_NONE;
        default:
                return clk_id;
        }
}
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */

void clock_early_init(void)
{
        tegra30_set_up_pllp();
}

void arch_timer_init(void)
{
}

#define PMC_SATA_PWRGT 0x1ac
#define  PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
#define  PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)

#define PLLE_SS_CNTL 0x68
#define  PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
#define  PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
#define  PLLE_SS_CNTL_SSCBYP (1 << 12)
#define  PLLE_SS_CNTL_INTERP_RESET (1 << 11)
#define  PLLE_SS_CNTL_BYPASS_SS (1 << 10)
#define  PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)

#define PLLE_BASE 0x0e8
#define  PLLE_BASE_ENABLE_CML (1 << 31)
#define  PLLE_BASE_ENABLE (1 << 30)
#define  PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
#define  PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
#define  PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
#define  PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)

#define PLLE_MISC 0x0ec
#define  PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
#define  PLLE_MISC_PLL_READY (1 << 15)
#define  PLLE_MISC_LOCK (1 << 11)
#define  PLLE_MISC_LOCK_ENABLE (1 << 9)
#define  PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)

static int tegra_plle_train(void)
{
        unsigned int timeout = 2000;
        unsigned long value;

        value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
        value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
        writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);

        value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
        value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
        writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);

        value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
        value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
        writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);

        do {
                value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
                if (value & PLLE_MISC_PLL_READY)
                        break;

                udelay(100);
        } while (--timeout);

        if (timeout == 0) {
                error("timeout waiting for PLLE to become ready");
                return -ETIMEDOUT;
        }

        return 0;
}

int tegra_plle_enable(void)
{
        unsigned int cpcon = 11, p = 18, n = 150, m = 1, timeout = 1000;
        u32 value;
        int err;

        /* disable PLLE clock */
        value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
        value &= ~PLLE_BASE_ENABLE_CML;
        value &= ~PLLE_BASE_ENABLE;
        writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);

        /* clear lock enable and setup field */
        value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
        value &= ~PLLE_MISC_LOCK_ENABLE;
        value &= ~PLLE_MISC_SETUP_BASE(0xffff);
        value &= ~PLLE_MISC_SETUP_EXT(0x3);
        writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);

        value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
        if ((value & PLLE_MISC_PLL_READY) == 0) {
                err = tegra_plle_train();
                if (err < 0) {
                        error("failed to train PLLE: %d", err);
                        return err;
                }
        }

        /* configure PLLE */
        value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);

        value &= ~PLLE_BASE_PLDIV_CML(0x0f);
        value |= PLLE_BASE_PLDIV_CML(cpcon);

        value &= ~PLLE_BASE_PLDIV(0x3f);
        value |= PLLE_BASE_PLDIV(p);

        value &= ~PLLE_BASE_NDIV(0xff);
        value |= PLLE_BASE_NDIV(n);

        value &= ~PLLE_BASE_MDIV(0xff);
        value |= PLLE_BASE_MDIV(m);

        writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);

        value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
        value |= PLLE_MISC_SETUP_BASE(0x7);
        value |= PLLE_MISC_LOCK_ENABLE;
        value |= PLLE_MISC_SETUP_EXT(0);
        writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);

        value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
        value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
                 PLLE_SS_CNTL_BYPASS_SS;
        writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);

        value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
        value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
        writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);

        do {
                value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
                if (value & PLLE_MISC_LOCK)
                        break;

                udelay(2);
        } while (--timeout);

        if (timeout == 0) {
                error("timeout waiting for PLLE to lock");
                return -ETIMEDOUT;
        }

        udelay(50);

        value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
        value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
        value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);

        value &= ~PLLE_SS_CNTL_SSCINC(0xff);
        value |= PLLE_SS_CNTL_SSCINC(0x01);

        value &= ~PLLE_SS_CNTL_SSCBYP;
        value &= ~PLLE_SS_CNTL_INTERP_RESET;
        value &= ~PLLE_SS_CNTL_BYPASS_SS;

        value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
        value |= PLLE_SS_CNTL_SSCMAX(0x24);
        writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);

        return 0;
}

struct periph_clk_init periph_clk_init_table[] = {
        { PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
        { PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
        { PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
        { PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
        { PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
        { PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
        { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
        { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
        { PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
        { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
        { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
        { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
        { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
        { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
        { PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH },
        { PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
        { PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
        { PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
        { PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
        { -1, },
};