LXR uboot/include/configs/dns325.h

   1/*
   2 * Copyright (C) 2011
   3 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4 *
   5 * Based on Kirkwood support:
   6 * (C) Copyright 2009
   7 * Marvell Semiconductor <www.marvell.com>
   8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9 *
  10 * SPDX-License-Identifier:     GPL-2.0+
  11 */
  12
  13#ifndef _CONFIG_DNS325_H
  14#define _CONFIG_DNS325_H
  15
  16/*
  17 * Machine number definition
  18 */
  19#define MACH_TYPE_DNS325                3800
  20#define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  21
  22/*
  23 * High Level Configuration Options (easy to change)
  24 */
  25#define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  26#define CONFIG_KW88F6281                /* SOC Name */
  27#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  28
  29/*
  30 * Commands configuration
  31 */
  32#define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  33#define CONFIG_CMD_ENV
  34#define CONFIG_CMD_NAND
  35#define CONFIG_CMD_IDE
  36#define CONFIG_CMD_DATE
  37#define CONFIG_SYS_MVFS
  38
  39#define CONFIG_NR_DRAM_BANKS            1
  40
  41/*
  42 * mv-common.h should be defined after CMD configs since it used them
  43 * to enable certain macros
  44 */
  45#include "mv-common.h"
  46
  47/* Remove or override few declarations from mv-common.h */
  48
  49/*
  50 * Ethernet Driver configuration
  51 */
  52#ifdef CONFIG_CMD_NET
  53#define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  54#define CONFIG_NETCONSOLE
  55#endif
  56
  57/*
  58 * SATA Driver configuration
  59 */
  60#ifdef CONFIG_MVSATA_IDE
  61#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  62#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  63#endif
  64
  65/*
  66 * RTC driver configuration
  67 */
  68#ifdef CONFIG_CMD_DATE
  69#define CONFIG_RTC_MV
  70#endif
  71
  72/*
  73 * Enable GPI0 support
  74 */
  75#define CONFIG_KIRKWOOD_GPIO
  76
  77/*
  78 * Environment variables configurations
  79 */
  80#ifdef CONFIG_CMD_NAND
  81#define CONFIG_ENV_IS_IN_NAND
  82#define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  83#else
  84#define CONFIG_ENV_IS_NOWHERE
  85#endif
  86
  87#define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  88#define CONFIG_ENV_ADDR                 0xe0000
  89#define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  90
  91/*
  92 * Default environment variables
  93 */
  94#define MTDIDS_DEFAULT                  "nand0=orion_nand"
  95
  96#define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
  97        "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
  98
  99#define CONFIG_EXTRA_ENV_SETTINGS \
 100        "stdin=serial\0" \
 101        "stdout=serial\0" \
 102        "stderr=serial\0" \
 103        "loadaddr=0x800000\0" \
 104        "autoload=no\0" \
 105        "console=ttyS0,115200\0" \
 106        "mtdparts="MTDPARTS_DEFAULT \
 107        "optargs=\0" \
 108        "bootenv=uEnv.txt\0" \
 109        "importbootenv=echo Importing environment ...; " \
 110                "env import -t ${loadaddr} ${filesize}\0" \
 111        "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 112        "setbootargs=setenv bootargs console=${console} " \
 113                "${optargs} " \
 114                "${mtdparts} " \
 115                "root=${bootenvroot} " \
 116                "rootfstype=${bootenvrootfstype}\0" \
 117        "subbootcmd=run setbootargs; " \
 118                "if run bootenvloadimage; then " \
 119                        "bootm ${loadaddr};" \
 120                "fi;\0" \
 121        "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 122        "nandrootfstype=ubifs\0" \
 123        "nandloadimage=nand read ${loadaddr} kernel\0" \
 124        "setnandbootenv=echo Booting from nand ...; " \
 125                "setenv bootenvroot ${nandroot}; " \
 126                "setenv bootenvrootfstype ${nandrootfstype}; " \
 127                "setenv bootenvloadimage ${nandloadimage}\0"
 128
 129#define CONFIG_BOOTCOMMAND \
 130        "if test -n ${bootenv} && usb start; then " \
 131                "if run loadbootenv; then " \
 132                        "echo Loaded environment ${bootenv} from usb;" \
 133                        "run importbootenv;" \
 134                "fi;" \
 135                "if test -n ${bootenvcmd}; then " \
 136                        "echo Running bootenvcmd ...;" \
 137                        "run bootenvcmd;" \
 138                "fi;" \
 139        "fi;" \
 140        "run setnandbootenv subbootcmd;"
 141
 142#endif /* _CONFIG_DNS325_H */
 143