/*
 * Copyright 2004 Freescale Semiconductor.
 * (C) Copyright 2002,2003, Motorola Inc.
 * Xianghua Xiao, (X.Xiao@motorola.com)
 *
 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */


#include <common.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <fsl_ddr_sdram.h>
#include <libfdt.h>
#include <fdt_support.h>

#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif

void local_bus_init(void);

int checkboard (void)
{
        puts("Board: ADS\n");

#ifdef CONFIG_PCI
        printf("PCI1: 32 bit, %d MHz (compiled)\n",
               CONFIG_SYS_CLK_FREQ / 1000000);
#else
        printf("PCI1: disabled\n");
#endif

        /*
         * Initialize local bus.
         */
        local_bus_init();

        return 0;
}

/*
 * Initialize Local Bus
 */

void
local_bus_init(void)
{
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;

        uint clkdiv;
        uint lbc_hz;
        sys_info_t sysinfo;

        /*
         * Errata LBC11.
         * Fix Local Bus clock glitch when DLL is enabled.
         *
         * If localbus freq is < 66MHz, DLL bypass mode must be used.
         * If localbus freq is > 133MHz, DLL can be safely enabled.
         * Between 66 and 133, the DLL is enabled with an override workaround.
         */

        get_sys_info(&sysinfo);
        clkdiv = lbc->lcrr & LCRR_CLKDIV;
        lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;

        if (lbc_hz < 66) {
                lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;    /* DLL Bypass */

        } else if (lbc_hz >= 133) {
                lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */

        } else {
                /*
                 * On REV1 boards, need to change CLKDIV before enable DLL.
                 * Default CLKDIV is 8, change it to 4 temporarily.
                 */
                uint pvr = get_pvr();
                uint temp_lbcdll = 0;

                if (pvr == PVR_85xx_REV1) {
                        /* FIXME: Justify the high bit here. */
                        lbc->lcrr = 0x10000004;
                }

                lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
                udelay(200);

                /*
                 * Sample LBC DLL ctrl reg, upshift it to set the
                 * override bits.
                 */
                temp_lbcdll = gur->lbcdllcr;
                gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
                asm("sync;isync;msync");
        }
}


/*
 * Initialize SDRAM memory on the Local Bus.
 */
void lbc_sdram_init(void)
{
        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
        uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;

        puts("LBC SDRAM: ");
        print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
                   "\n       ");

        /*
         * Setup SDRAM Base and Option Registers
         */
        set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
        set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
        lbc->lbcr = CONFIG_SYS_LBC_LBCR;
        asm("msync");

        lbc->lsrt = CONFIG_SYS_LBC_LSRT;
        lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
        asm("sync");

        /*
         * Configure the SDRAM controller.
         */
        lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
        asm("sync");
        *sdram_addr = 0xff;
        ppcDcbf((unsigned long) sdram_addr);
        udelay(100);

        lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
        asm("sync");
        *sdram_addr = 0xff;
        ppcDcbf((unsigned long) sdram_addr);
        udelay(100);

        lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
        asm("sync");
        *sdram_addr = 0xff;
        ppcDcbf((unsigned long) sdram_addr);
        udelay(100);

        lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
        asm("sync");
        *sdram_addr = 0xff;
        ppcDcbf((unsigned long) sdram_addr);
        udelay(100);

        lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
        asm("sync");
        *sdram_addr = 0xff;
        ppcDcbf((unsigned long) sdram_addr);
        udelay(100);
}

#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
 *  fixed sdram init -- doesn't use serial presence detect.
 ************************************************************************/
phys_size_t fixed_sdram(void)
{
  #ifndef CONFIG_SYS_RAMBOOT
        struct ccsr_ddr __iomem *ddr =
                (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);

        ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
        ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
        ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
        ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
        ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
        ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
    #if defined (CONFIG_DDR_ECC)
        ddr->err_disable = 0x0000000D;
        ddr->err_sbe = 0x00ff0000;
    #endif
        asm("sync;isync;msync");
        udelay(500);
    #if defined (CONFIG_DDR_ECC)
        /* Enable ECC checking */
        ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
    #else
        ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
    #endif
        asm("sync; isync; msync");
        udelay(500);
  #endif
        return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif  /* !defined(CONFIG_SPD_EEPROM) */


#if defined(CONFIG_PCI)
/*
 * Initialize PCI Devices, report devices found.
 */


static struct pci_controller hose;

#endif  /* CONFIG_PCI */


void
pci_init_board(void)
{
#ifdef CONFIG_PCI
        pci_mpc85xx_init(&hose);
#endif /* CONFIG_PCI */
}


#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
        int node, tmp[2];
        const char *path;

        ft_cpu_setup(blob, bd);

        node = fdt_path_offset(blob, "/aliases");
        tmp[0] = 0;
        if (node >= 0) {
#ifdef CONFIG_PCI
                path = fdt_getprop(blob, node, "pci0", NULL);
                if (path) {
                        tmp[1] = hose.last_busno - hose.first_busno;
                        do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
                }
#endif
        }

        return 0;
}
#endif