LXR uboot/include/axp209.h

   1/*
   2 * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   3 *
   4 * SPDX-License-Identifier:     GPL-2.0+
   5 */
   6
   7enum axp209_reg {
   8        AXP209_POWER_STATUS = 0x00,
   9        AXP209_CHIP_VERSION = 0x03,
  10        AXP209_OUTPUT_CTRL = 0x12,
  11        AXP209_DCDC2_VOLTAGE = 0x23,
  12        AXP209_DCDC3_VOLTAGE = 0x27,
  13        AXP209_LDO24_VOLTAGE = 0x28,
  14        AXP209_LDO3_VOLTAGE = 0x29,
  15        AXP209_IRQ_ENABLE1 = 0x40,
  16        AXP209_IRQ_ENABLE2 = 0x41,
  17        AXP209_IRQ_ENABLE3 = 0x42,
  18        AXP209_IRQ_ENABLE4 = 0x43,
  19        AXP209_IRQ_ENABLE5 = 0x44,
  20        AXP209_IRQ_STATUS5 = 0x4c,
  21        AXP209_SHUTDOWN = 0x32,
  22};
  23
  24#define AXP209_POWER_STATUS_ON_BY_DC    (1 << 0)
  25#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4)
  26
  27#define AXP209_OUTPUT_CTRL_EXTEN        (1 << 0)
  28#define AXP209_OUTPUT_CTRL_DCDC3        (1 << 1)
  29#define AXP209_OUTPUT_CTRL_LDO2         (1 << 2)
  30#define AXP209_OUTPUT_CTRL_LDO4         (1 << 3)
  31#define AXP209_OUTPUT_CTRL_DCDC2        (1 << 4)
  32#define AXP209_OUTPUT_CTRL_LDO3         (1 << 6)
  33
  34#define AXP209_IRQ5_PEK_UP              (1 << 6)
  35#define AXP209_IRQ5_PEK_DOWN            (1 << 5)
  36
  37#define AXP209_POWEROFF                 (1 << 7)
  38
  39/* For axp_gpio.c */
  40#define AXP_POWER_STATUS                0x00
  41#define AXP_POWER_STATUS_VBUS_PRESENT           (1 << 5)
  42#define AXP_GPIO0_CTRL                  0x90
  43#define AXP_GPIO1_CTRL                  0x92
  44#define AXP_GPIO2_CTRL                  0x93
  45#define AXP_GPIO_CTRL_OUTPUT_LOW                0x00 /* Drive pin low */
  46#define AXP_GPIO_CTRL_OUTPUT_HIGH               0x01 /* Drive pin high */
  47#define AXP_GPIO_CTRL_INPUT                     0x02 /* Input */
  48#define AXP_GPIO_STATE                  0x94
  49#define AXP_GPIO_STATE_OFFSET                   4
  50