LXR uboot/include/configs/apalis

   1/*
   2 * Copyright 2013-2015 Toradex, Inc.
   3 *
   4 * Configuration settings for the Toradex Apalis iMX6
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIG_H
  10#define __CONFIG_H
  11
  12#include "mx6_common.h"
  13#define CONFIG_SYS_THUMB_BUILD
  14
  15#undef CONFIG_DISPLAY_BOARDINFO
  16#define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  17
  18#define CONFIG_MACH_TYPE                4886
  19
  20#define CONFIG_SYS_GENERIC_BOARD
  21
  22#include <asm/arch/imx-regs.h>
  23#include <asm/imx-common/gpio.h>
  24
  25#ifdef CONFIG_SPL
  26#include "imx6_spl.h"
  27#define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  28#endif
  29
  30#define CONFIG_CMDLINE_TAG
  31#define CONFIG_SETUP_MEMORY_TAGS
  32#define CONFIG_INITRD_TAG
  33#define CONFIG_REVISION_TAG
  34#define CONFIG_SERIAL_TAG
  35
  36/* Size of malloc() pool */
  37#define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  38
  39#define CONFIG_MISC_INIT_R
  40
  41#define CONFIG_MXC_UART
  42#define CONFIG_MXC_UART_BASE            UART1_BASE
  43
  44/* Make the HW version stuff available in U-Boot env */
  45#define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  46#define CONFIG_ENV_VARS_UBOOT_CONFIG
  47#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  48
  49/* I2C Configs */
  50#define CONFIG_SYS_I2C
  51#define CONFIG_SYS_I2C_MXC
  52#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  53#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  54#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  55#define CONFIG_SYS_I2C_SPEED            100000
  56
  57/* OCOTP Configs */
  58#define CONFIG_CMD_FUSE
  59#ifdef CONFIG_CMD_FUSE
  60#define CONFIG_MXC_OCOTP
  61#endif
  62
  63/* MMC Configs */
  64#define CONFIG_FSL_ESDHC
  65#define CONFIG_FSL_USDHC
  66#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  67#define CONFIG_SYS_FSL_USDHC_NUM        3
  68
  69#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  70#define CONFIG_BOUNCE_BUFFER
  71#define CONFIG_FAT_WRITE
  72
  73#ifdef CONFIG_MX6Q
  74#define CONFIG_CMD_SATA
  75#endif
  76
  77/*
  78 * SATA Configs
  79 */
  80#ifdef CONFIG_CMD_SATA
  81#define CONFIG_DWC_AHSATA
  82#define CONFIG_SYS_SATA_MAX_DEVICE      1
  83#define CONFIG_DWC_AHSATA_PORT_ID       0
  84#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  85#define CONFIG_LBA48
  86#define CONFIG_LIBATA
  87#endif
  88
  89/* Network */
  90#define CONFIG_FEC_MXC
  91#define CONFIG_MII
  92#define IMX_FEC_BASE                    ENET_BASE_ADDR
  93#define CONFIG_FEC_XCV_TYPE             RGMII
  94#define CONFIG_ETHPRIME                 "FEC"
  95#define CONFIG_FEC_MXC_PHYADDR          6
  96#define CONFIG_PHYLIB
  97#define CONFIG_PHY_MICREL
  98#define CONFIG_PHY_MICREL_KSZ9031
  99#define CONFIG_IP_DEFRAG
 100#define CONFIG_TFTP_BLOCKSIZE           4096
 101#define CONFIG_TFTP_TSIZE
 102
 103/* USB Configs */
 104/* Host */
 105#define CONFIG_USB_HOST_ETHER
 106#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 107#define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 108#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 109#define CONFIG_MXC_USB_FLAGS            0
 110#define CONFIG_USB_KEYBOARD
 111#ifdef CONFIG_USB_KEYBOARD
 112#define CONFIG_SYS_USB_EVENT_POLL
 113#endif /* CONFIG_USB_KEYBOARD */
 114/* Client */
 115#define CONFIG_USB_GADGET_VBUS_DRAW     2
 116#define CONFIG_USBD_HS
 117
 118#define CONFIG_USB_GADGET_MASS_STORAGE
 119#define CONFIG_USB_FUNCTION_MASS_STORAGE
 120#define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 121/* USB DFU */
 122#define CONFIG_DFU_MMC
 123
 124/* Miscellaneous commands */
 125#define CONFIG_CMD_BMODE
 126#define CONFIG_MXC_GPIO
 127
 128/* Framebuffer and LCD */
 129#define CONFIG_VIDEO_IPUV3
 130#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 131#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 132#define CONFIG_VIDEO_BMP_RLE8
 133#define CONFIG_SPLASH_SCREEN
 134#define CONFIG_SPLASH_SCREEN_ALIGN
 135#define CONFIG_BMP_16BPP
 136#define CONFIG_VIDEO_LOGO
 137#define CONFIG_VIDEO_BMP_LOGO
 138#define CONFIG_IPUV3_CLK                260000000
 139#define CONFIG_CMD_HDMIDETECT
 140#define CONFIG_CONSOLE_MUX
 141#define CONFIG_IMX_HDMI
 142#define CONFIG_IMX_VIDEO_SKIP
 143#define CONFIG_CMD_BMP
 144
 145/* allow to overwrite serial and ethaddr */
 146#define CONFIG_ENV_OVERWRITE
 147#define CONFIG_CONS_INDEX               1
 148#define CONFIG_BAUDRATE                 115200
 149
 150/* Command definition */
 151#undef CONFIG_CMD_LOADB
 152#undef CONFIG_CMD_LOADS
 153#undef CONFIG_CMD_NFS
 154#undef CONFIG_CMD_FLASH
 155
 156#undef CONFIG_IPADDR
 157#define CONFIG_IPADDR                   192.168.10.2
 158#define CONFIG_NETMASK                  255.255.255.0
 159#undef CONFIG_SERVERIP
 160#define CONFIG_SERVERIP                 192.168.10.1
 161
 162#define CONFIG_LOADADDR                 0x12000000
 163#define CONFIG_SYS_TEXT_BASE            0x17800000
 164
 165#ifdef CONFIG_CMD_SATA
 166#define CONFIG_DRIVE_SATA "sata "
 167#else
 168#define CONFIG_DRIVE_SATA
 169#endif
 170
 171#ifdef CONFIG_CMD_MMC
 172#define CONFIG_DRIVE_MMC "mmc "
 173#else
 174#define CONFIG_DRIVE_MMC
 175#endif
 176
 177#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 178
 179#define DFU_ALT_EMMC_INFO \
 180        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 181        "boot part 0 1;" \
 182        "rootfs part 0 2;" \
 183        "uImage fat 0 1;" \
 184        "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 185        "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 186
 187#define EMMC_BOOTCMD \
 188        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 189                "rootwait\0" \
 190        "emmcboot=run setup; " \
 191                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 192                "${vidargs}; echo Booting from internal eMMC chip...; " \
 193                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 194                "${boot_file} && run fdt_fixup && " \
 195                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 196        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 197                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 198
 199#define MEM_LAYOUT_ENV_SETTINGS \
 200        "fdt_addr_r=0x12000000\0" \
 201        "fdt_high=0xffffffff\0" \
 202        "initrd_high=0xffffffff\0" \
 203        "kernel_addr_r=0x11000000\0" \
 204        "ramdisk_addr_r=0x12100000\0"
 205
 206#define NFS_BOOTCMD \
 207        "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 208        "nfsboot=run setup; " \
 209                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 210                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 211                "run nfsdtbload; dhcp ${kernel_addr_r} " \
 212                "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 213        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 214                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 215
 216#define SD_BOOTCMD                                              \
 217        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 218                "rootwait\0" \
 219        "sdboot=run setup; " \
 220                "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 221                "${vidargs}; echo Booting from SD card; " \
 222                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 223                "${boot_file} && run fdt_fixup && " \
 224                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 225        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 226                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 227
 228#define USB_BOOTCMD \
 229        "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 230                "rootwait\0" \
 231        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 232                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 233                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 234                "${boot_file} && run fdt_fixup && " \
 235                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 236        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 237                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 238
 239#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 240#define FDT_FILE "imx6q-apalis-eval.dtb"
 241#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 242#else
 243#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 244#endif
 245#define CONFIG_EXTRA_ENV_SETTINGS \
 246        "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 247                "run nfsboot ; echo ; echo nfsboot failed ; " \
 248                "usb start ;" \
 249                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 250        "boot_file=uImage\0" \
 251        "console=ttymxc0\0" \
 252        "defargs=enable_wait_mode=off vmalloc=400M\0" \
 253        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 254        EMMC_BOOTCMD \
 255        "fdt_file=" FDT_FILE "\0" \
 256        "fdt_fixup=;\0" \
 257        MEM_LAYOUT_ENV_SETTINGS \
 258        NFS_BOOTCMD \
 259        SD_BOOTCMD \
 260        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 261                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 262                "flash_eth.img && source ${loadaddr}\0" \
 263        "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 264                "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 265                "source ${loadaddr}\0" \
 266        "setup=setenv setupargs fec_mac=${ethaddr} " \
 267                "consoleblank=0 no_console_suspend=1 console=tty1 " \
 268                "console=${console},${baudrate}n8\0 " \
 269        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 270        "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 271                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 272                "source ${loadaddr}\0" \
 273        "splashpos=m,m\0" \
 274        "vidargs=mxc_hdmi.only_cea=1 " \
 275                "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 276                "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 277                "fbmem=32M\0 "
 278
 279/* Miscellaneous configurable options */
 280#define CONFIG_SYS_LONGHELP
 281#define CONFIG_AUTO_COMPLETE
 282#undef CONFIG_SYS_CBSIZE
 283#define CONFIG_SYS_CBSIZE               1024
 284#undef CONFIG_SYS_MAXARGS
 285#define CONFIG_SYS_MAXARGS              48
 286
 287#define CONFIG_SYS_ALT_MEMTEST
 288#define CONFIG_SYS_MEMTEST_START        0x10000000
 289#define CONFIG_SYS_MEMTEST_END          0x10010000
 290#define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 291
 292#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 293
 294#define CONFIG_CMDLINE_EDITING
 295
 296/* Physical Memory Map */
 297#define CONFIG_NR_DRAM_BANKS            1
 298#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 299
 300#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 301#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 302#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 303
 304#define CONFIG_SYS_INIT_SP_OFFSET \
 305        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 306#define CONFIG_SYS_INIT_SP_ADDR \
 307        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 308
 309/* environment organization */
 310
 311#define CONFIG_ENV_SIZE                 (8 * 1024)
 312
 313#define CONFIG_ENV_IS_IN_MMC
 314
 315#if defined(CONFIG_ENV_IS_IN_MMC)
 316/* Environment in eMMC, before config block at the end of 1st "boot sector" */
 317#define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 318                                         CONFIG_TDX_CFG_BLOCK_OFFSET)
 319#define CONFIG_SYS_MMC_ENV_DEV          0
 320#define CONFIG_SYS_MMC_ENV_PART         1
 321#endif
 322
 323#define CONFIG_OF_SYSTEM_SETUP
 324
 325#define CONFIG_CMD_TIME
 326
 327#define CONFIG_SUPPORT_RAW_INITRD
 328
 329#define CONFIG_CRC32_VERIFY
 330
 331#endif  /* __CONFIG_H */
 332