1/* 2 * (C) Copyright 2015 Linaro 3 * 4 * Peter Griffin <peter.griffin@linaro.org> 5 * 6 * Configuration for HiKey 96boards CE. Parts were derived from other ARM 7 * configurations. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12#ifndef __HIKEY_H 13#define __HIKEY_H 14 15#include <linux/sizes.h> 16 17#define CONFIG_POWER 18#define CONFIG_POWER_HI6553 19 20#define CONFIG_REMAKE_ELF 21 22#define CONFIG_SUPPORT_RAW_INITRD 23 24/* Physical Memory Map */ 25 26/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ 27#define CONFIG_SYS_TEXT_BASE 0x35000000 28 29#define CONFIG_NR_DRAM_BANKS 6 30#define PHYS_SDRAM_1 0x00000000 31 32/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ 33#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF 34 35#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 36 37#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 38 39#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 40 41#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) 42 43/* Generic Timer Definitions */ 44#define COUNTER_FREQUENCY 19000000 45 46/* Generic Interrupt Controller Definitions */ 47#define GICD_BASE 0xf6801000 48#define GICC_BASE 0xf6802000 49 50/* Size of malloc() pool */ 51#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) 52 53/* Serial port PL010/PL011 through the device model */ 54#define CONFIG_PL01X_SERIAL 55#define CONFIG_BAUDRATE 115200 56 57#ifdef CONFIG_CMD_USB 58#define CONFIG_USB_DWC2 59#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 60/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/ 61#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 62 63#define CONFIG_USB_HOST_ETHER 64#define CONFIG_USB_ETHER_SMSC95XX 65#define CONFIG_USB_ETHER_ASIX 66#define CONFIG_MISC_INIT_R 67#endif 68 69#define CONFIG_HIKEY_GPIO 70 71/* SD/MMC configuration */ 72#define CONFIG_BOUNCE_BUFFER 73 74#define CONFIG_FS_EXT4 75 76/* Command line configuration */ 77#define CONFIG_CMD_ENV 78 79#define CONFIG_MTD_PARTITIONS 80 81/* BOOTP options */ 82#define CONFIG_BOOTP_BOOTFILESIZE 83 84#include <config_distro_defaults.h> 85 86/* Initial environment variables */ 87 88/* 89 * Defines where the kernel and FDT will be put in RAM 90 */ 91 92/* Assume we boot with root on the seventh partition of eMMC */ 93#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" 94 95#define BOOT_TARGET_DEVICES(func) \ 96 func(USB, usb, 0) \ 97 func(MMC, mmc, 1) \ 98 func(DHCP, dhcp, na) 99#include <config_distro_bootcmd.h> 100 101#define CONFIG_EXTRA_ENV_SETTINGS \ 102 "kernel_name=Image\0" \ 103 "kernel_addr_r=0x00080000\0" \ 104 "fdtfile=hi6220-hikey.dtb\0" \ 105 "fdt_addr_r=0x02000000\0" \ 106 "fdt_high=0xffffffffffffffff\0" \ 107 "initrd_high=0xffffffffffffffff\0" \ 108 BOOTENV 109 110/* Preserve environment on sd card */ 111#define CONFIG_COMMAND_HISTORY 112 113#define CONFIG_ENV_SIZE 0x1000 114#define CONFIG_ENV_IS_IN_FAT 115#define FAT_ENV_INTERFACE "mmc" 116#define FAT_ENV_DEVICE_AND_PART "1:1" 117#define FAT_ENV_FILE "uboot.env" 118#define CONFIG_FAT_WRITE 119#define CONFIG_ENV_VARS_UBOOT_CONFIG 120 121/* Monitor Command Prompt */ 122#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 123#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 124 sizeof(CONFIG_SYS_PROMPT) + 16) 125#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 126#define CONFIG_SYS_LONGHELP 127#define CONFIG_CMDLINE_EDITING 128#define CONFIG_SYS_MAXARGS 64 /* max command args */ 129 130#endif /* __HIKEY_H */ 131