LXR uboot/include/configs/mx6cuboxi.h

   1/*
   2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3 *
   4 * Configuration settings for the SolidRun mx6 based boards
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8#ifndef __MX6CUBOXI_CONFIG_H
   9#define __MX6CUBOXI_CONFIG_H
  10
  11#include <config_distro_defaults.h>
  12#include "mx6_common.h"
  13
  14#include "imx6_spl.h"
  15
  16#define CONFIG_IMX_THERMAL
  17
  18#define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  19#define CONFIG_MXC_UART
  20
  21/* MMC Configs */
  22#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  23
  24/* Ethernet Configuration */
  25#define CONFIG_FEC_MXC
  26#define CONFIG_MII
  27#define IMX_FEC_BASE                    ENET_BASE_ADDR
  28#define CONFIG_FEC_XCV_TYPE             RGMII
  29#define CONFIG_FEC_MXC_PHYADDR          0
  30#define CONFIG_PHYLIB
  31#define CONFIG_PHY_ATHEROS
  32
  33/* Framebuffer */
  34#define CONFIG_VIDEO_IPUV3
  35#define CONFIG_IPUV3_CLK                260000000
  36#define CONFIG_VIDEO_BMP_RLE8
  37#define CONFIG_SPLASH_SCREEN
  38#define CONFIG_SPLASH_SCREEN_ALIGN
  39#define CONFIG_BMP_16BPP
  40#define CONFIG_VIDEO_LOGO
  41#define CONFIG_VIDEO_BMP_LOGO
  42#define CONFIG_IMX_HDMI
  43#define CONFIG_CMD_HDMIDETECT
  44#define CONFIG_IMX_VIDEO_SKIP
  45
  46/* USB */
  47#define CONFIG_USB_EHCI
  48#define CONFIG_USB_EHCI_MX6
  49#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  50#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  51#define CONFIG_MXC_USB_FLAGS            0
  52#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  53#define CONFIG_SYS_USB_EVENT_POLL
  54#define CONFIG_PREBOOT \
  55        "if hdmidet; then " \
  56                "usb start; "                  \
  57                "setenv stdin  serial,usbkbd; "\
  58                "setenv stdout serial,vga; "   \
  59                "setenv stderr serial,vga; "   \
  60        "else " \
  61                "setenv stdin  serial; " \
  62                "setenv stdout serial; " \
  63                "setenv stderr serial; " \
  64        "fi;"
  65
  66/* Command definition */
  67
  68#define CONFIG_MXC_UART_BASE    UART1_BASE
  69#define CONSOLE_DEV     "ttymxc0"
  70#define CONFIG_SYS_FSL_USDHC_NUM        1
  71#define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
  72
  73#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  74#ifndef CONFIG_SPL_BUILD
  75#define CONFIG_EXTRA_ENV_SETTINGS \
  76        "fdtfile=undefined\0" \
  77        "fdt_addr_r=0x18000000\0" \
  78        "fdt_addr=0x18000000\0" \
  79        "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"  \
  80        "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  81        "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  82        "ramdisk_addr_r=0x13000000\0" \
  83        "ramdiskaddr=0x13000000\0" \
  84        "initrd_high=0xffffffff\0" \
  85        "fdt_high=0xffffffff\0" \
  86        "ip_dyn=yes\0" \
  87        "console=" CONSOLE_DEV "\0" \
  88        "bootm_size=0x10000000\0" \
  89        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  90        "update_sd_firmware=" \
  91                "if test ${ip_dyn} = yes; then " \
  92                        "setenv get_cmd dhcp; " \
  93                "else " \
  94                        "setenv get_cmd tftp; " \
  95                "fi; " \
  96                "if mmc dev ${mmcdev}; then "   \
  97                        "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  98                                "setexpr fw_sz ${filesize} / 0x200; " \
  99                                "setexpr fw_sz ${fw_sz} + 1; "  \
 100                                "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 101                        "fi; "  \
 102                "fi\0" \
 103        "findfdt="\
 104                "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 105                        "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 106                "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 107                        "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 108                "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 109                        "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 110                "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 111                        "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 112                "if test $fdtfile = undefined; then " \
 113                        "echo WARNING: Could not determine dtb to use; fi; \0" \
 114        BOOTENV
 115
 116#define CONFIG_BOOTCOMMAND \
 117        "run findfdt; " \
 118        "run distro_bootcmd"
 119
 120#define BOOT_TARGET_DEVICES(func) \
 121        func(MMC, mmc, 0) \
 122        func(USB, usb, 0) \
 123        func(PXE, pxe, na) \
 124        func(DHCP, dhcp, na)
 125
 126#include <config_distro_bootcmd.h>
 127
 128#else
 129#define CONFIG_EXTRA_ENV_SETTINGS
 130#endif /* CONFIG_SPL_BUILD */
 131
 132/* Physical Memory Map */
 133#define CONFIG_NR_DRAM_BANKS           1
 134#define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 135#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 136#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 137
 138#define CONFIG_SYS_INIT_SP_OFFSET \
 139        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 140#define CONFIG_SYS_INIT_SP_ADDR \
 141        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 142
 143/* Environment organization */
 144#define CONFIG_ENV_SIZE                 (8 * 1024)
 145#define CONFIG_ENV_IS_IN_MMC
 146#define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 147
 148#endif                         /* __MX6CUBOXI_CONFIG_H */
 149