1
2
3
4
5
6
7
8
9
10
11
12#ifndef __CONFIG_H
13#define __CONFIG_H
14
15#define CONFIG_NR_DRAM_BANKS 2
16
17
18
19
20
21
22
23
24#define CONFIG_SYS_TEXT_BASE 0x80100000
25#define CONFIG_SPL_BSS_START_ADDR 0x80000000
26#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10)
27#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
28#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
29
30#include <configs/ti_omap3_common.h>
31
32#define CONFIG_MISC_INIT_R
33
34#define CONFIG_REVISION_TAG 1
35#define CONFIG_ENV_OVERWRITE
36
37
38
39
40#define CONFIG_I2C_MULTI_BUS 1
41
42
43#define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}}
44
45
46#define CONFIG_USB_MUSB_OMAP2PLUS
47#define CONFIG_USB_MUSB_PIO_ONLY
48#define CONFIG_TWL4030_USB 1
49#define CONFIG_USB_ETHER
50#define CONFIG_USB_ETHER_RNDIS
51#define CONFIG_USB_FUNCTION_FASTBOOT
52#define CONFIG_CMD_FASTBOOT
53#define CONFIG_ANDROID_BOOT_IMAGE
54#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
55#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
56
57
58#define CONFIG_USB_EHCI
59
60#define CONFIG_USB_EHCI_OMAP
61#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
62
63#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
64#define CONFIG_USB_HOST_ETHER
65#define CONFIG_USB_ETHER_ASIX
66#define CONFIG_USB_ETHER_MCS7830
67#define CONFIG_USB_ETHER_SMSC95XX
68
69
70#define CONFIG_OMAP3_GPIO_5
71#define CONFIG_OMAP3_GPIO_6
72
73
74
75#define MTDIDS_DEFAULT "nand0=nand"
76#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
77 "1920k(u-boot),128k(u-boot-env),"\
78 "4m(kernel),-(fs)"
79
80#define CONFIG_CMD_NAND
81
82#define CONFIG_VIDEO_OMAP3
83
84
85
86
87#define CONFIG_TWL4030_LED 1
88
89
90
91
92#define CONFIG_NAND_OMAP_GPMC
93#define CONFIG_SYS_MAX_NAND_DEVICE 1
94
95
96#define BOOT_TARGET_DEVICES(func) \
97 func(MMC, mmc, 0)
98
99#define CONFIG_BOOTCOMMAND \
100 "run findfdt; " \
101 "run distro_bootcmd; " \
102 "mmc dev ${mmcdev}; if mmc rescan; then " \
103 "if run userbutton; then " \
104 "setenv bootenv uEnv.txt;" \
105 "else " \
106 "setenv bootenv user.txt;" \
107 "fi;" \
108 "echo SD/MMC found on device ${mmcdev};" \
109 "if run loadbootenv; then " \
110 "echo Loaded environment from ${bootenv};" \
111 "run importbootenv;" \
112 "fi;" \
113 "if test -n $uenvcmd; then " \
114 "echo Running uenvcmd ...;" \
115 "run uenvcmd;" \
116 "fi;" \
117 "if run loadbootscript; then " \
118 "run bootscript; " \
119 "else " \
120 "if run loadimage; then " \
121 "run mmcboot;" \
122 "fi;" \
123 "fi; " \
124 "fi;" \
125 "run nandboot;" \
126 "setenv bootfile zImage;" \
127 "if run loadimage; then " \
128 "run loadfdt;" \
129 "run mmcbootz; " \
130 "fi; " \
131
132#include <config_distro_bootcmd.h>
133
134#define CONFIG_EXTRA_ENV_SETTINGS \
135 "loadaddr=0x80200000\0" \
136 "kernel_addr_r=0x80200000\0" \
137 "rdaddr=0x81000000\0" \
138 "initrd_addr_r=0x81000000\0" \
139 "fdt_high=0xffffffff\0" \
140 "fdtaddr=0x80f80000\0" \
141 "fdt_addr_r=0x80f80000\0" \
142 "usbtty=cdc_acm\0" \
143 "bootfile=uImage\0" \
144 "ramdisk=ramdisk.gz\0" \
145 "bootdir=/boot\0" \
146 "bootpart=0:2\0" \
147 "console=ttyO2,115200n8\0" \
148 "mpurate=auto\0" \
149 "buddy=none\0" \
150 "optargs=\0" \
151 "camera=none\0" \
152 "vram=12M\0" \
153 "dvimode=640x480MR-16@60\0" \
154 "defaultdisplay=dvi\0" \
155 "mmcdev=0\0" \
156 "mmcroot=/dev/mmcblk0p2 rw\0" \
157 "mmcrootfstype=ext3 rootwait\0" \
158 "nandroot=ubi0:rootfs ubi.mtd=4\0" \
159 "nandrootfstype=ubifs\0" \
160 "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
161 "ramrootfstype=ext2\0" \
162 "mmcargs=setenv bootargs console=${console} " \
163 "${optargs} " \
164 "mpurate=${mpurate} " \
165 "buddy=${buddy} "\
166 "camera=${camera} "\
167 "vram=${vram} " \
168 "omapfb.mode=dvi:${dvimode} " \
169 "omapdss.def_disp=${defaultdisplay} " \
170 "root=${mmcroot} " \
171 "rootfstype=${mmcrootfstype}\0" \
172 "nandargs=setenv bootargs console=${console} " \
173 "${optargs} " \
174 "mpurate=${mpurate} " \
175 "buddy=${buddy} "\
176 "camera=${camera} "\
177 "vram=${vram} " \
178 "omapfb.mode=dvi:${dvimode} " \
179 "omapdss.def_disp=${defaultdisplay} " \
180 "root=${nandroot} " \
181 "rootfstype=${nandrootfstype}\0" \
182 "findfdt=" \
183 "if test $beaglerev = AxBx; then " \
184 "setenv fdtfile omap3-beagle.dtb; fi; " \
185 "if test $beaglerev = Cx; then " \
186 "setenv fdtfile omap3-beagle.dtb; fi; " \
187 "if test $beaglerev = C4; then " \
188 "setenv fdtfile omap3-beagle.dtb; fi; " \
189 "if test $beaglerev = xMAB; then " \
190 "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
191 "if test $beaglerev = xMC; then " \
192 "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
193 "if test $fdtfile = undefined; then " \
194 "echo WARNING: Could not determine device tree to use; fi; \0" \
195 "validatefdt=" \
196 "if test $beaglerev = xMAB; then " \
197 "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
198 "setenv fdtfile omap3-beagle-xm.dtb; " \
199 "fi; " \
200 "fi; \0" \
201 "bootenv=uEnv.txt\0" \
202 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
203 "importbootenv=echo Importing environment from mmc ...; " \
204 "env import -t -r $loadaddr $filesize\0" \
205 "ramargs=setenv bootargs console=${console} " \
206 "${optargs} " \
207 "mpurate=${mpurate} " \
208 "buddy=${buddy} "\
209 "vram=${vram} " \
210 "omapfb.mode=dvi:${dvimode} " \
211 "omapdss.def_disp=${defaultdisplay} " \
212 "root=${ramroot} " \
213 "rootfstype=${ramrootfstype}\0" \
214 "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
215 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
216 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
217 "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
218 "source ${loadaddr}\0" \
219 "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
220 "mmcboot=echo Booting from mmc ...; " \
221 "run mmcargs; " \
222 "bootm ${loadaddr}\0" \
223 "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
224 "run mmcargs; " \
225 "bootz ${loadaddr} - ${fdtaddr}\0" \
226 "nandboot=echo Booting from nand ...; " \
227 "run nandargs; " \
228 "nand read ${loadaddr} 280000 400000; " \
229 "bootm ${loadaddr}\0" \
230 "ramboot=echo Booting from ramdisk ...; " \
231 "run ramargs; " \
232 "bootm ${loadaddr}\0" \
233 "userbutton=if gpio input 173; then run userbutton_xm; " \
234 "else run userbutton_nonxm; fi;\0" \
235 "userbutton_xm=gpio input 4;\0" \
236 "userbutton_nonxm=gpio input 7;\0" \
237 BOOTENV
238
239
240
241
242
243
244#define CONFIG_SYS_PTV 2
245
246
247
248
249
250
251#if defined(CONFIG_CMD_NAND)
252#define CONFIG_SYS_FLASH_BASE NAND_BASE
253#endif
254
255
256#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
257#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
258
259#define CONFIG_ENV_IS_IN_NAND 1
260#define CONFIG_ENV_SIZE (128 << 10)
261#define ONENAND_ENV_OFFSET 0x260000
262#define SMNAND_ENV_OFFSET 0x260000
263
264#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)
265#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
266#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
267
268#define CONFIG_OMAP3_SPI
269
270
271#define CONFIG_SPL_OMAP3_ID_NAND
272
273
274#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
275#define CONFIG_SYS_NAND_5_ADDR_CYCLE
276#define CONFIG_SYS_NAND_PAGE_COUNT 64
277#define CONFIG_SYS_NAND_PAGE_SIZE 2048
278#define CONFIG_SYS_NAND_OOBSIZE 64
279#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
280#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
281#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
282 10, 11, 12, 13}
283#define CONFIG_SYS_NAND_ECCSIZE 512
284#define CONFIG_SYS_NAND_ECCBYTES 3
285#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
286#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
287
288#ifdef CONFIG_SPL_OS_BOOT
289#define CONFIG_CMD_SPL_NAND_OFS 0x240000
290#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
291#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
292#endif
293
294#endif
295