LXR uboot/drivers/ddr/fsl/util.c

   1/*
   2 * Copyright 2008-2014 Freescale Semiconductor, Inc.
   3 *
   4 * SPDX-License-Identifier:     GPL-2.0
   5 */
   6
   7#include <common.h>
   8#ifdef CONFIG_PPC
   9#include <asm/fsl_law.h>
  10#endif
  11#include <div64.h>
  12
  13#include <fsl_ddr.h>
  14#include <fsl_immap.h>
  15#include <asm/io.h>
  16
  17/* To avoid 64-bit full-divides, we factor this here */
  18#define ULL_2E12 2000000000000ULL
  19#define UL_5POW12 244140625UL
  20#define UL_2POW13 (1UL << 13)
  21
  22#define ULL_8FS 0xFFFFFFFFULL
  23
  24u32 fsl_ddr_get_version(unsigned int ctrl_num)
  25{
  26        struct ccsr_ddr __iomem *ddr;
  27        u32 ver_major_minor_errata;
  28
  29        switch (ctrl_num) {
  30        case 0:
  31                ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
  32                break;
  33#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
  34        case 1:
  35                ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
  36                break;
  37#endif
  38#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
  39        case 2:
  40                ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
  41                break;
  42#endif
  43#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
  44        case 3:
  45                ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
  46                break;
  47#endif
  48        default:
  49                printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
  50                return 0;
  51        }
  52        ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8;
  53        ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8;
  54
  55        return ver_major_minor_errata;
  56}
  57
  58/*
  59 * Round up mclk_ps to nearest 1 ps in memory controller code
  60 * if the error is 0.5ps or more.
  61 *
  62 * If an imprecise data rate is too high due to rounding error
  63 * propagation, compute a suitably rounded mclk_ps to compute
  64 * a working memory controller configuration.
  65 */
  66unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num)
  67{
  68        unsigned int data_rate = get_ddr_freq(ctrl_num);
  69        unsigned int result;
  70
  71        /* Round to nearest 10ps, being careful about 64-bit multiply/divide */
  72        unsigned long long rem, mclk_ps = ULL_2E12;
  73
  74        /* Now perform the big divide, the result fits in 32-bits */
  75        rem = do_div(mclk_ps, data_rate);
  76        result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;
  77
  78        return result;
  79}
  80
  81/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
  82unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos)
  83{
  84        unsigned long long clks, clks_rem;
  85        unsigned long data_rate = get_ddr_freq(ctrl_num);
  86
  87        /* Short circuit for zero picos */
  88        if (!picos)
  89                return 0;
  90
  91        /* First multiply the time by the data rate (32x32 => 64) */
  92        clks = picos * (unsigned long long)data_rate;
  93        /*
  94         * Now divide by 5^12 and track the 32-bit remainder, then divide
  95         * by 2*(2^12) using shifts (and updating the remainder).
  96         */
  97        clks_rem = do_div(clks, UL_5POW12);
  98        clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
  99        clks >>= 13;
 100
 101        /* If we had a remainder greater than the 1ps error, then round up */
 102        if (clks_rem > data_rate)
 103                clks++;
 104
 105        /* Clamp to the maximum representable value */
 106        if (clks > ULL_8FS)
 107                clks = ULL_8FS;
 108        return (unsigned int) clks;
 109}
 110
 111unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk)
 112{
 113        return get_memory_clk_period_ps(ctrl_num) * mclk;
 114}
 115
 116#ifdef CONFIG_PPC
 117void
 118__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 119                           unsigned int law_memctl,
 120                           unsigned int ctrl_num)
 121{
 122        unsigned long long base = memctl_common_params->base_address;
 123        unsigned long long size = memctl_common_params->total_mem;
 124
 125        /*
 126         * If no DIMMs on this controller, do not proceed any further.
 127         */
 128        if (!memctl_common_params->ndimms_present) {
 129                return;
 130        }
 131
 132#if !defined(CONFIG_PHYS_64BIT)
 133        if (base >= CONFIG_MAX_MEM_MAPPED)
 134                return;
 135        if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
 136                size = CONFIG_MAX_MEM_MAPPED - base;
 137#endif
 138        if (set_ddr_laws(base, size, law_memctl) < 0) {
 139                printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
 140                        law_memctl);
 141                return ;
 142        }
 143        debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
 144                base, size, law_memctl);
 145}
 146
 147__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
 148fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 149                         unsigned int memctl_interleaved,
 150                         unsigned int ctrl_num);
 151#endif
 152
 153void fsl_ddr_set_intl3r(const unsigned int granule_size)
 154{
 155#ifdef CONFIG_E6500
 156        u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 157        *mcintl3r = 0x80000000 | (granule_size & 0x1f);
 158        debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
 159#endif
 160}
 161
 162u32 fsl_ddr_get_intl3r(void)
 163{
 164        u32 val = 0;
 165#ifdef CONFIG_E6500
 166        u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 167        val = *mcintl3r;
 168#endif
 169        return val;
 170}
 171
 172void print_ddr_info(unsigned int start_ctrl)
 173{
 174        struct ccsr_ddr __iomem *ddr =
 175                (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
 176
 177#if     defined(CONFIG_E6500) && (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 178        u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 179#endif
 180#if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 181        uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
 182#endif
 183        uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 184        int cas_lat;
 185
 186#if CONFIG_SYS_NUM_DDR_CTLRS >= 2
 187        if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 188            (start_ctrl == 1)) {
 189                ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
 190                sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 191        }
 192#endif
 193#if CONFIG_SYS_NUM_DDR_CTLRS >= 3
 194        if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 195            (start_ctrl == 2)) {
 196                ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
 197                sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 198        }
 199#endif
 200
 201        if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
 202                puts(" (DDR not enabled)\n");
 203                return;
 204        }
 205
 206        puts(" (DDR");
 207        switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
 208                SDRAM_CFG_SDRAM_TYPE_SHIFT) {
 209        case SDRAM_TYPE_DDR1:
 210                puts("1");
 211                break;
 212        case SDRAM_TYPE_DDR2:
 213                puts("2");
 214                break;
 215        case SDRAM_TYPE_DDR3:
 216                puts("3");
 217                break;
 218        case SDRAM_TYPE_DDR4:
 219                puts("4");
 220                break;
 221        default:
 222                puts("?");
 223                break;
 224        }
 225
 226        if (sdram_cfg & SDRAM_CFG_32_BE)
 227                puts(", 32-bit");
 228        else if (sdram_cfg & SDRAM_CFG_16_BE)
 229                puts(", 16-bit");
 230        else
 231                puts(", 64-bit");
 232
 233        /* Calculate CAS latency based on timing cfg values */
 234        cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf);
 235        if (fsl_ddr_get_version(0) <= 0x40400)
 236                cas_lat += 1;
 237        else
 238                cas_lat += 2;
 239        cas_lat += ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 3) << 4;
 240        printf(", CL=%d", cas_lat >> 1);
 241        if (cas_lat & 0x1)
 242                puts(".5");
 243
 244        if (sdram_cfg & SDRAM_CFG_ECC_EN)
 245                puts(", ECC on)");
 246        else
 247                puts(", ECC off)");
 248
 249#if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 250#ifdef CONFIG_E6500
 251        if (*mcintl3r & 0x80000000) {
 252                puts("\n");
 253                puts("       DDR Controller Interleaving Mode: ");
 254                switch (*mcintl3r & 0x1f) {
 255                case FSL_DDR_3WAY_1KB_INTERLEAVING:
 256                        puts("3-way 1KB");
 257                        break;
 258                case FSL_DDR_3WAY_4KB_INTERLEAVING:
 259                        puts("3-way 4KB");
 260                        break;
 261                case FSL_DDR_3WAY_8KB_INTERLEAVING:
 262                        puts("3-way 8KB");
 263                        break;
 264                default:
 265                        puts("3-way UNKNOWN");
 266                        break;
 267                }
 268        }
 269#endif
 270#endif
 271#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
 272        if ((cs0_config & 0x20000000) && (start_ctrl == 0)) {
 273                puts("\n");
 274                puts("       DDR Controller Interleaving Mode: ");
 275
 276                switch ((cs0_config >> 24) & 0xf) {
 277                case FSL_DDR_256B_INTERLEAVING:
 278                        puts("256B");
 279                        break;
 280                case FSL_DDR_CACHE_LINE_INTERLEAVING:
 281                        puts("cache line");
 282                        break;
 283                case FSL_DDR_PAGE_INTERLEAVING:
 284                        puts("page");
 285                        break;
 286                case FSL_DDR_BANK_INTERLEAVING:
 287                        puts("bank");
 288                        break;
 289                case FSL_DDR_SUPERBANK_INTERLEAVING:
 290                        puts("super-bank");
 291                        break;
 292                default:
 293                        puts("invalid");
 294                        break;
 295                }
 296        }
 297#endif
 298
 299        if ((sdram_cfg >> 8) & 0x7f) {
 300                puts("\n");
 301                puts("       DDR Chip-Select Interleaving Mode: ");
 302                switch(sdram_cfg >> 8 & 0x7f) {
 303                case FSL_DDR_CS0_CS1_CS2_CS3:
 304                        puts("CS0+CS1+CS2+CS3");
 305                        break;
 306                case FSL_DDR_CS0_CS1:
 307                        puts("CS0+CS1");
 308                        break;
 309                case FSL_DDR_CS2_CS3:
 310                        puts("CS2+CS3");
 311                        break;
 312                case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 313                        puts("CS0+CS1 and CS2+CS3");
 314                        break;
 315                default:
 316                        puts("invalid");
 317                        break;
 318                }
 319        }
 320}
 321
 322void __weak detail_board_ddr_info(void)
 323{
 324        print_ddr_info(0);
 325}
 326
 327void board_add_ram_info(int use_default)
 328{
 329        detail_board_ddr_info();
 330}
 331
 332#ifdef CONFIG_FSL_DDR_SYNC_REFRESH
 333#define DDRC_DEBUG20_INIT_DONE  0x80000000
 334#define DDRC_DEBUG2_RF          0x00000040
 335void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
 336                                 unsigned int last_ctrl)
 337{
 338        unsigned int i;
 339        u32 ddrc_debug20;
 340        u32 ddrc_debug2[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 341        u32 *ddrc_debug2_p[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 342        struct ccsr_ddr __iomem *ddr;
 343
 344        for (i = first_ctrl; i <= last_ctrl; i++) {
 345                switch (i) {
 346                case 0:
 347                        ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 348                        break;
 349#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 350                case 1:
 351                        ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
 352                        break;
 353#endif
 354#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
 355                case 2:
 356                        ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
 357                        break;
 358#endif
 359#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
 360                case 3:
 361                        ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 362                        break;
 363#endif
 364                default:
 365                        printf("%s unexpected ctrl = %u\n", __func__, i);
 366                        return;
 367                }
 368                ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 369                ddrc_debug2_p[i] = &ddr->debug[1];
 370                while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
 371                        /* keep polling until DDRC init is done */
 372                        udelay(100);
 373                        ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 374                }
 375                ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF;
 376        }
 377        /*
 378         * Sync refresh
 379         * This is put together to make sure the refresh reqeusts are sent
 380         * closely to each other.
 381         */
 382        for (i = first_ctrl; i <= last_ctrl; i++)
 383                ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
 384}
 385#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */
 386
 387void remove_unused_controllers(fsl_ddr_info_t *info)
 388{
 389#ifdef CONFIG_FSL_LSCH3
 390        int i;
 391        u64 nodeid;
 392        void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
 393        bool ddr0_used = false;
 394        bool ddr1_used = false;
 395
 396        for (i = 0; i < 8; i++) {
 397                nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
 398                if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
 399                        ddr0_used = true;
 400                } else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
 401                        ddr1_used = true;
 402                } else {
 403                        printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
 404                               nodeid);
 405                }
 406                hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
 407        }
 408        if (!ddr0_used && !ddr1_used) {
 409                printf("Invalid configuration in HN-F SAM control\n");
 410                return;
 411        }
 412
 413        if (!ddr0_used && info->first_ctrl == 0) {
 414                info->first_ctrl = 1;
 415                info->num_ctrls = 1;
 416                debug("First DDR controller disabled\n");
 417                return;
 418        }
 419
 420        if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
 421                info->num_ctrls = 1;
 422                debug("Second DDR controller disabled\n");
 423        }
 424#endif
 425}
 426