LXR uboot/include/configs/apalis

   1/*
   2 * Copyright 2013-2015 Toradex, Inc.
   3 *
   4 * Configuration settings for the Toradex Apalis iMX6
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIG_H
  10#define __CONFIG_H
  11
  12#include "mx6_common.h"
  13
  14#undef CONFIG_DISPLAY_BOARDINFO
  15#define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17#define CONFIG_MACH_TYPE                4886
  18
  19#define CONFIG_SYS_GENERIC_BOARD
  20
  21#include <asm/arch/imx-regs.h>
  22#include <asm/imx-common/gpio.h>
  23
  24#ifdef CONFIG_SPL
  25#include "imx6_spl.h"
  26#define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  27#endif
  28
  29#define CONFIG_CMDLINE_TAG
  30#define CONFIG_SETUP_MEMORY_TAGS
  31#define CONFIG_INITRD_TAG
  32#define CONFIG_REVISION_TAG
  33#define CONFIG_SERIAL_TAG
  34
  35/* Size of malloc() pool */
  36#define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  37
  38#define CONFIG_MISC_INIT_R
  39
  40#define CONFIG_MXC_UART
  41#define CONFIG_MXC_UART_BASE            UART1_BASE
  42
  43/* Make the HW version stuff available in U-Boot env */
  44#define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  45#define CONFIG_ENV_VARS_UBOOT_CONFIG
  46#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  47
  48/* I2C Configs */
  49#define CONFIG_SYS_I2C
  50#define CONFIG_SYS_I2C_MXC
  51#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  54#define CONFIG_SYS_I2C_SPEED            100000
  55
  56/* OCOTP Configs */
  57#define CONFIG_CMD_FUSE
  58#ifdef CONFIG_CMD_FUSE
  59#define CONFIG_MXC_OCOTP
  60#endif
  61
  62/* MMC Configs */
  63#define CONFIG_FSL_ESDHC
  64#define CONFIG_FSL_USDHC
  65#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  66#define CONFIG_SYS_FSL_USDHC_NUM        3
  67
  68#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  69#define CONFIG_BOUNCE_BUFFER
  70#define CONFIG_FAT_WRITE
  71
  72#ifdef CONFIG_MX6Q
  73#define CONFIG_CMD_SATA
  74#endif
  75
  76/*
  77 * SATA Configs
  78 */
  79#ifdef CONFIG_CMD_SATA
  80#define CONFIG_DWC_AHSATA
  81#define CONFIG_SYS_SATA_MAX_DEVICE      1
  82#define CONFIG_DWC_AHSATA_PORT_ID       0
  83#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  84#define CONFIG_LBA48
  85#define CONFIG_LIBATA
  86#endif
  87
  88/* Network */
  89#define CONFIG_FEC_MXC
  90#define CONFIG_MII
  91#define IMX_FEC_BASE                    ENET_BASE_ADDR
  92#define CONFIG_FEC_XCV_TYPE             RGMII
  93#define CONFIG_ETHPRIME                 "FEC"
  94#define CONFIG_FEC_MXC_PHYADDR          6
  95#define CONFIG_PHYLIB
  96#define CONFIG_PHY_MICREL
  97#define CONFIG_PHY_MICREL_KSZ9031
  98#define CONFIG_IP_DEFRAG
  99#define CONFIG_TFTP_BLOCKSIZE           4096
 100#define CONFIG_TFTP_TSIZE
 101
 102/* USB Configs */
 103/* Host */
 104#define CONFIG_USB_HOST_ETHER
 105#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 106#define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 107#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 108#define CONFIG_MXC_USB_FLAGS            0
 109#define CONFIG_USB_KEYBOARD
 110#ifdef CONFIG_USB_KEYBOARD
 111#define CONFIG_SYS_USB_EVENT_POLL
 112#endif /* CONFIG_USB_KEYBOARD */
 113/* Client */
 114#define CONFIG_USB_GADGET_VBUS_DRAW     2
 115#define CONFIG_USBD_HS
 116
 117#define CONFIG_USB_GADGET_MASS_STORAGE
 118#define CONFIG_USB_FUNCTION_MASS_STORAGE
 119#define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 120/* USB DFU */
 121#define CONFIG_DFU_MMC
 122
 123/* Miscellaneous commands */
 124#define CONFIG_MXC_GPIO
 125
 126/* Framebuffer and LCD */
 127#define CONFIG_VIDEO_IPUV3
 128#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 129#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 130#define CONFIG_VIDEO_BMP_RLE8
 131#define CONFIG_SPLASH_SCREEN
 132#define CONFIG_SPLASH_SCREEN_ALIGN
 133#define CONFIG_BMP_16BPP
 134#define CONFIG_VIDEO_LOGO
 135#define CONFIG_VIDEO_BMP_LOGO
 136#define CONFIG_IPUV3_CLK                260000000
 137#define CONFIG_CMD_HDMIDETECT
 138#define CONFIG_CONSOLE_MUX
 139#define CONFIG_IMX_HDMI
 140#define CONFIG_IMX_VIDEO_SKIP
 141
 142/* allow to overwrite serial and ethaddr */
 143#define CONFIG_ENV_OVERWRITE
 144#define CONFIG_CONS_INDEX               1
 145
 146/* Command definition */
 147#undef CONFIG_CMD_LOADB
 148#undef CONFIG_CMD_LOADS
 149#undef CONFIG_CMD_NFS
 150#undef CONFIG_CMD_FLASH
 151
 152#undef CONFIG_IPADDR
 153#define CONFIG_IPADDR                   192.168.10.2
 154#define CONFIG_NETMASK                  255.255.255.0
 155#undef CONFIG_SERVERIP
 156#define CONFIG_SERVERIP                 192.168.10.1
 157
 158#define CONFIG_LOADADDR                 0x12000000
 159#define CONFIG_SYS_TEXT_BASE            0x17800000
 160
 161#ifdef CONFIG_CMD_SATA
 162#define CONFIG_DRIVE_SATA "sata "
 163#else
 164#define CONFIG_DRIVE_SATA
 165#endif
 166
 167#ifdef CONFIG_CMD_MMC
 168#define CONFIG_DRIVE_MMC "mmc "
 169#else
 170#define CONFIG_DRIVE_MMC
 171#endif
 172
 173#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 174
 175#define DFU_ALT_EMMC_INFO \
 176        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 177        "boot part 0 1;" \
 178        "rootfs part 0 2;" \
 179        "uImage fat 0 1;" \
 180        "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 181        "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 182
 183#define EMMC_BOOTCMD \
 184        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 185                "rootwait\0" \
 186        "emmcboot=run setup; " \
 187                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 188                "${vidargs}; echo Booting from internal eMMC chip...; " \
 189                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 190                "${boot_file} && run fdt_fixup && " \
 191                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 192        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 193                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 194
 195#define MEM_LAYOUT_ENV_SETTINGS \
 196        "bootm_size=0x20000000\0" \
 197        "fdt_addr_r=0x12000000\0" \
 198        "fdt_high=0xffffffff\0" \
 199        "initrd_high=0xffffffff\0" \
 200        "kernel_addr_r=0x11000000\0" \
 201        "ramdisk_addr_r=0x12100000\0"
 202
 203#define NFS_BOOTCMD \
 204        "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 205        "nfsboot=run setup; " \
 206                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 207                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 208                "run nfsdtbload; dhcp ${kernel_addr_r} " \
 209                "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 210        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 211                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 212
 213#define SD_BOOTCMD                                              \
 214        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 215                "rootwait\0" \
 216        "sdboot=run setup; " \
 217                "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 218                "${vidargs}; echo Booting from SD card; " \
 219                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 220                "${boot_file} && run fdt_fixup && " \
 221                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 222        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 223                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 224
 225#define USB_BOOTCMD \
 226        "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 227                "rootwait\0" \
 228        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 229                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 230                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 231                "${boot_file} && run fdt_fixup && " \
 232                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 233        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 234                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 235
 236#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 237#define FDT_FILE "imx6q-apalis-eval.dtb"
 238#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 239#else
 240#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 241#endif
 242#define CONFIG_EXTRA_ENV_SETTINGS \
 243        "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 244                "run nfsboot ; echo ; echo nfsboot failed ; " \
 245                "usb start ;" \
 246                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 247        "boot_file=uImage\0" \
 248        "console=ttymxc0\0" \
 249        "defargs=enable_wait_mode=off vmalloc=400M\0" \
 250        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 251        EMMC_BOOTCMD \
 252        "fdt_file=" FDT_FILE "\0" \
 253        "fdt_fixup=;\0" \
 254        MEM_LAYOUT_ENV_SETTINGS \
 255        NFS_BOOTCMD \
 256        SD_BOOTCMD \
 257        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 258                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 259                "flash_eth.img && source ${loadaddr}\0" \
 260        "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 261                "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 262                "source ${loadaddr}\0" \
 263        "setup=setenv setupargs fec_mac=${ethaddr} " \
 264                "consoleblank=0 no_console_suspend=1 console=tty1 " \
 265                "console=${console},${baudrate}n8\0 " \
 266        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 267        "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 268                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 269                "source ${loadaddr}\0" \
 270        "splashpos=m,m\0" \
 271        "vidargs=mxc_hdmi.only_cea=1 " \
 272                "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 273                "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 274                "fbmem=32M\0 "
 275
 276/* Miscellaneous configurable options */
 277#define CONFIG_SYS_LONGHELP
 278#define CONFIG_AUTO_COMPLETE
 279#undef CONFIG_SYS_CBSIZE
 280#define CONFIG_SYS_CBSIZE               1024
 281#undef CONFIG_SYS_MAXARGS
 282#define CONFIG_SYS_MAXARGS              48
 283
 284#define CONFIG_SYS_ALT_MEMTEST
 285#define CONFIG_SYS_MEMTEST_START        0x10000000
 286#define CONFIG_SYS_MEMTEST_END          0x10010000
 287#define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 288
 289#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 290
 291#define CONFIG_CMDLINE_EDITING
 292
 293/* Physical Memory Map */
 294#define CONFIG_NR_DRAM_BANKS            1
 295#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 296
 297#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 298#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 299#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 300
 301#define CONFIG_SYS_INIT_SP_OFFSET \
 302        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 303#define CONFIG_SYS_INIT_SP_ADDR \
 304        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 305
 306/* environment organization */
 307
 308#define CONFIG_ENV_SIZE                 (8 * 1024)
 309
 310#define CONFIG_ENV_IS_IN_MMC
 311
 312#if defined(CONFIG_ENV_IS_IN_MMC)
 313/* Environment in eMMC, before config block at the end of 1st "boot sector" */
 314#define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 315                                         CONFIG_TDX_CFG_BLOCK_OFFSET)
 316#define CONFIG_SYS_MMC_ENV_DEV          0
 317#define CONFIG_SYS_MMC_ENV_PART         1
 318#endif
 319
 320#define CONFIG_OF_SYSTEM_SETUP
 321
 322#define CONFIG_CMD_TIME
 323
 324#define CONFIG_SUPPORT_RAW_INITRD
 325
 326#define CONFIG_CRC32_VERIFY
 327
 328#endif  /* __CONFIG_H */
 329