LXR uboot/include/configs/colibri

   1/*
   2 * Copyright 2013-2015 Toradex, Inc.
   3 *
   4 * Configuration settings for the Toradex Colibri iMX6
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIG_H
  10#define __CONFIG_H
  11
  12#include "mx6_common.h"
  13
  14#undef CONFIG_DISPLAY_BOARDINFO
  15#define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17#define CONFIG_SYS_GENERIC_BOARD
  18
  19#include <asm/arch/imx-regs.h>
  20#include <asm/imx-common/gpio.h>
  21
  22#ifdef CONFIG_SPL
  23#include "imx6_spl.h"
  24#define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  25#endif
  26
  27#define CONFIG_CMDLINE_TAG
  28#define CONFIG_SETUP_MEMORY_TAGS
  29#define CONFIG_INITRD_TAG
  30#define CONFIG_REVISION_TAG
  31#define CONFIG_SERIAL_TAG
  32
  33/* Size of malloc() pool */
  34#define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  35
  36#define CONFIG_MISC_INIT_R
  37
  38#define CONFIG_MXC_UART
  39#define CONFIG_MXC_UART_BASE            UART1_BASE
  40
  41/* Make the HW version stuff available in U-Boot env */
  42#define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  43#define CONFIG_ENV_VARS_UBOOT_CONFIG
  44#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  45
  46/* I2C Configs */
  47#define CONFIG_SYS_I2C
  48#define CONFIG_SYS_I2C_MXC
  49#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  50#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  51#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  52#define CONFIG_SYS_I2C_SPEED            100000
  53
  54/* OCOTP Configs */
  55#define CONFIG_CMD_FUSE
  56#ifdef CONFIG_CMD_FUSE
  57#define CONFIG_MXC_OCOTP
  58#endif
  59
  60/* MMC Configs */
  61#define CONFIG_FSL_ESDHC
  62#define CONFIG_FSL_USDHC
  63#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  64#define CONFIG_SYS_FSL_USDHC_NUM        2
  65
  66#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  67#define CONFIG_BOUNCE_BUFFER
  68#define CONFIG_FAT_WRITE
  69
  70/* Network */
  71#define CONFIG_FEC_MXC
  72#define CONFIG_MII
  73#define IMX_FEC_BASE                    ENET_BASE_ADDR
  74#define CONFIG_FEC_XCV_TYPE             RMII
  75#define CONFIG_ETHPRIME                 "FEC"
  76#define CONFIG_FEC_MXC_PHYADDR          1
  77#define CONFIG_PHYLIB
  78#define CONFIG_PHY_MICREL
  79#define CONFIG_IP_DEFRAG
  80#define CONFIG_TFTP_BLOCKSIZE           16352
  81#define CONFIG_TFTP_TSIZE
  82
  83/* USB Configs */
  84/* Host */
  85#define CONFIG_USB_HOST_ETHER
  86#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  87#define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  88#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  89#define CONFIG_MXC_USB_FLAGS            0
  90#define CONFIG_USB_KEYBOARD
  91#ifdef CONFIG_USB_KEYBOARD
  92#define CONFIG_SYS_USB_EVENT_POLL
  93#endif /* CONFIG_USB_KEYBOARD */
  94/* Client */
  95#define CONFIG_USB_GADGET_VBUS_DRAW     2
  96#define CONFIG_USBD_HS
  97
  98#define CONFIG_USB_GADGET_MASS_STORAGE
  99#define CONFIG_USB_FUNCTION_MASS_STORAGE
 100#define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 101/* USB DFU */
 102#define CONFIG_DFU_MMC
 103
 104/* Miscellaneous commands */
 105#define CONFIG_MXC_GPIO
 106
 107/* Framebuffer and LCD */
 108#define CONFIG_VIDEO_IPUV3
 109#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 110#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 111#define CONFIG_VIDEO_BMP_RLE8
 112#define CONFIG_SPLASH_SCREEN
 113#define CONFIG_SPLASH_SCREEN_ALIGN
 114#define CONFIG_BMP_16BPP
 115#define CONFIG_VIDEO_LOGO
 116#define CONFIG_VIDEO_BMP_LOGO
 117#define CONFIG_IPUV3_CLK                260000000
 118#define CONFIG_CMD_HDMIDETECT
 119#define CONFIG_CONSOLE_MUX
 120#define CONFIG_IMX_HDMI
 121#define CONFIG_IMX_VIDEO_SKIP
 122
 123/* allow to overwrite serial and ethaddr */
 124#define CONFIG_ENV_OVERWRITE
 125#define CONFIG_CONS_INDEX               1
 126
 127/* Command definition */
 128#undef CONFIG_CMD_LOADB
 129#undef CONFIG_CMD_LOADS
 130#undef CONFIG_CMD_NFS
 131#undef CONFIG_CMD_FLASH
 132
 133#undef CONFIG_IPADDR
 134#define CONFIG_IPADDR                   192.168.10.2
 135#define CONFIG_NETMASK                  255.255.255.0
 136#undef CONFIG_SERVERIP
 137#define CONFIG_SERVERIP                 192.168.10.1
 138
 139#define CONFIG_LOADADDR                 0x12000000
 140#define CONFIG_SYS_TEXT_BASE            0x17800000
 141
 142#ifdef CONFIG_CMD_MMC
 143#define CONFIG_DRIVE_MMC "mmc "
 144#else
 145#define CONFIG_DRIVE_MMC
 146#endif
 147
 148#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
 149
 150#define DFU_ALT_EMMC_INFO \
 151        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 152        "boot part 0 1;" \
 153        "rootfs part 0 2;" \
 154        "uImage fat 0 1;" \
 155        "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 156        "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 157
 158#define EMMC_BOOTCMD \
 159        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 160                "rootwait\0" \
 161        "emmcboot=run setup; " \
 162                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 163                "${vidargs}; echo Booting from internal eMMC chip...; " \
 164                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 165                "${boot_file} && run fdt_fixup && " \
 166                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 167        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 168                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 169
 170#define MEM_LAYOUT_ENV_SETTINGS \
 171        "bootm_size=0x10000000\0" \
 172        "fdt_addr_r=0x12000000\0" \
 173        "fdt_high=0xffffffff\0" \
 174        "initrd_high=0xffffffff\0" \
 175        "kernel_addr_r=0x11000000\0" \
 176        "ramdisk_addr_r=0x12100000\0"
 177
 178#define NFS_BOOTCMD \
 179        "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 180        "nfsboot=run setup; " \
 181                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 182                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 183                "run nfsdtbload; dhcp ${kernel_addr_r} " \
 184                "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 185        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 186                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 187
 188#define SD_BOOTCMD                                              \
 189        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 190                "rootwait\0" \
 191        "sdboot=run setup; " \
 192                "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 193                "${vidargs}; echo Booting from SD card; " \
 194                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 195                "${boot_file} && run fdt_fixup && " \
 196                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 197        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 198                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 199
 200#define USB_BOOTCMD \
 201        "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 202                "rootwait\0" \
 203        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 204                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 205                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 206                "${boot_file} && run fdt_fixup && " \
 207                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 208        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 209                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 210
 211#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 212#define CONFIG_EXTRA_ENV_SETTINGS \
 213        "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 214                "run nfsboot ; echo ; echo nfsboot failed ; " \
 215                "usb start ;" \
 216                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 217        "boot_file=uImage\0" \
 218        "console=ttymxc0\0" \
 219        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 220        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 221        EMMC_BOOTCMD \
 222        "fdt_file=" FDT_FILE "\0" \
 223        "fdt_fixup=;\0" \
 224        MEM_LAYOUT_ENV_SETTINGS \
 225        NFS_BOOTCMD \
 226        SD_BOOTCMD \
 227        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 228                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 229                "flash_eth.img && source ${loadaddr}\0" \
 230        "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 231                "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 232                "source ${loadaddr}\0" \
 233        "setup=setenv setupargs fec_mac=${ethaddr} " \
 234                "consoleblank=0 no_console_suspend=1 console=tty1 " \
 235                "console=${console},${baudrate}n8\0 " \
 236        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 237        "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 238                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 239                "source ${loadaddr}\0" \
 240        "splashpos=m,m\0" \
 241        "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
 242                "video=mxcfb1:off fbmem=8M\0 "
 243
 244/* Miscellaneous configurable options */
 245#define CONFIG_SYS_LONGHELP
 246#define CONFIG_AUTO_COMPLETE
 247#undef CONFIG_SYS_CBSIZE
 248#define CONFIG_SYS_CBSIZE               1024
 249#undef CONFIG_SYS_MAXARGS
 250#define CONFIG_SYS_MAXARGS              48
 251
 252#define CONFIG_SYS_ALT_MEMTEST
 253#define CONFIG_SYS_MEMTEST_START        0x10000000
 254#define CONFIG_SYS_MEMTEST_END          0x10010000
 255#define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 256
 257#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 258
 259#define CONFIG_CMDLINE_EDITING
 260
 261/* Physical Memory Map */
 262#define CONFIG_NR_DRAM_BANKS            1
 263#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 264
 265#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 266#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 267#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 268
 269#define CONFIG_SYS_INIT_SP_OFFSET \
 270        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 271#define CONFIG_SYS_INIT_SP_ADDR \
 272        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 273
 274/* environment organization */
 275#define CONFIG_ENV_SIZE                 (8 * 1024)
 276
 277#define CONFIG_ENV_IS_IN_MMC
 278
 279#if defined(CONFIG_ENV_IS_IN_MMC)
 280/* Environment in eMMC, before config block at the end of 1st "boot sector" */
 281#define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 282                                         CONFIG_TDX_CFG_BLOCK_OFFSET)
 283#define CONFIG_SYS_MMC_ENV_DEV          0
 284#define CONFIG_SYS_MMC_ENV_PART         1
 285#endif
 286
 287#define CONFIG_OF_SYSTEM_SETUP
 288
 289#define CONFIG_CMD_TIME
 290
 291#define CONFIG_SUPPORT_RAW_INITRD
 292
 293#define CONFIG_CRC32_VERIFY
 294
 295#endif  /* __CONFIG_H */
 296