1/* 2 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#ifndef _CONFIG_DB_88F6720_H 8#define _CONFIG_DB_88F6720_H 9 10/* 11 * High Level Configuration Options (easy to change) 12 */ 13#define CONFIG_DISPLAY_BOARDINFO_LATE 14 15/* 16 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 17 * for DDR ECC byte filling in the SPL before loading the main 18 * U-Boot into it. 19 */ 20#define CONFIG_SYS_TEXT_BASE 0x00800000 21#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ 22 23/* 24 * Commands configuration 25 */ 26#define CONFIG_CMD_ENV 27 28/* I2C */ 29#define CONFIG_SYS_I2C 30#define CONFIG_SYS_I2C_MVTWSI 31#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 32#define CONFIG_SYS_I2C_SLAVE 0x0 33#define CONFIG_SYS_I2C_SPEED 100000 34 35/* USB/EHCI configuration */ 36#define CONFIG_EHCI_IS_TDI 37#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 38 39/* SPI NOR flash default params, used by sf commands */ 40#define CONFIG_SF_DEFAULT_SPEED 1000000 41#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 42 43/* Environment in SPI NOR flash */ 44#define CONFIG_ENV_IS_IN_SPI_FLASH 45#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 46#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 47#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 48 49#define CONFIG_PHY_MARVELL /* there is a marvell phy */ 50#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 51 52#define CONFIG_SYS_ALT_MEMTEST 53 54/* Additional FS support/configuration */ 55#define CONFIG_SUPPORT_VFAT 56 57/* 58 * mv-common.h should be defined after CMD configs since it used them 59 * to enable certain macros 60 */ 61#include "mv-common.h" 62 63/* 64 * Memory layout while starting into the bin_hdr via the 65 * BootROM: 66 * 67 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 68 * 0x4000.4030 bin_hdr start address 69 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 70 * 0x4007.fffc BootROM stack top 71 * 72 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 73 * L2 cache thus cannot be used. 74 */ 75 76/* SPL */ 77/* Defines for SPL */ 78#define CONFIG_SPL_FRAMEWORK 79#define CONFIG_SPL_TEXT_BASE 0x40004030 80#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 81 82#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 83#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 84 85#ifdef CONFIG_SPL_BUILD 86#define CONFIG_SYS_MALLOC_SIMPLE 87#endif 88 89#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 90#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 91 92/* SPL related SPI defines */ 93#define CONFIG_SPL_SPI_LOAD 94#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 95#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 96 97#endif /* _CONFIG_DB_88F6720_H */ 98