LXR uboot/include/configs/dragonboard410c.h

   1/*
   2 * Board configuration file for Dragonboard 410C
   3 *
   4 * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIGS_DRAGONBOARD410C_H
  10#define __CONFIGS_DRAGONBOARD410C_H
  11
  12#include <linux/sizes.h>
  13#include <asm/arch/sysmap-apq8016.h>
  14
  15#define CONFIG_MISC_INIT_R /* To stop autoboot */
  16
  17/* Physical Memory Map */
  18#define CONFIG_NR_DRAM_BANKS            1
  19#define PHYS_SDRAM_1                    0x80000000
  20/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
  21#define PHYS_SDRAM_1_SIZE               0x3da00000
  22#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  23#define CONFIG_SYS_TEXT_BASE            0x80080000
  24#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  25#define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
  26#define CONFIG_SYS_BOOTM_LEN            0x1000000 /* 16MB max kernel size */
  27
  28/* UART */
  29
  30/* Generic Timer Definitions */
  31#define COUNTER_FREQUENCY               19000000
  32
  33#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
  34
  35/* Fixup - in init code we switch from device to host mode,
  36 * it has to be done after each HCD reset */
  37#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  38
  39#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
  40
  41/* Support all possible USB ethernet dongles */
  42#define CONFIG_USB_ETHER_DM9601
  43#define CONFIG_USB_ETHER_ASIX
  44#define CONFIG_USB_ETHER_ASIX88179
  45#define CONFIG_USB_ETHER_MCS7830
  46#define CONFIG_USB_ETHER_SMSC95XX
  47
  48/* Extra Commands */
  49#define CONFIG_CMD_ENV
  50/* Enable that for switching of boot partitions */
  51/* Disabled by default as some sub-commands can brick eMMC */
  52/*#define CONFIG_SUPPORT_EMMC_BOOT */
  53#define CONFIG_CMD_REGINFO      /* Register dump                */
  54#define CONFIG_CMD_TFTP
  55
  56/* Partition table support */
  57#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
  58
  59#include <config_distro_defaults.h>
  60
  61/* BOOTP options */
  62#define CONFIG_BOOTP_BOOTFILESIZE
  63
  64/* Environment - Boot*/
  65#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
  66
  67#define BOOT_TARGET_DEVICES(func) \
  68        func(USB, usb, 0) \
  69        func(MMC, mmc, 1) \
  70        func(MMC, mmc, 0) \
  71        func(DHCP, dhcp, na)
  72
  73#include <config_distro_bootcmd.h>
  74
  75/* Does what recovery does */
  76#define REFLASH(file, part) \
  77"part start mmc 0 "#part" start && "\
  78"part size mmc 0 "#part" size && "\
  79"tftp $loadaddr "#file" && " \
  80"mmc write $loadaddr $start $size && "
  81
  82#define CONFIG_ENV_REFLASH \
  83"mmc dev 0 && "\
  84"usb start && "\
  85"dhcp && "\
  86"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
  87"mmc write $loadaddr 0 43 && " \
  88"mmc rescan && "\
  89REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
  90REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
  91REFLASH(dragonboard/rescue/rpm.mbn, 3)\
  92REFLASH(dragonboard/rescue/tz.mbn, 4)\
  93REFLASH(dragonboard/rescue/hyp.mbn, 5)\
  94REFLASH(dragonboard/rescue/sec.dat, 6)\
  95REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
  96REFLASH(dragonboard/u-boot.img, 8)\
  97"usb stop &&"\
  98"echo Reflash completed"
  99
 100/* Environment */
 101#define CONFIG_EXTRA_ENV_SETTINGS \
 102        "reflash="CONFIG_ENV_REFLASH"\0"\
 103        "loadaddr=0x81000000\0" \
 104        "fdt_high=0xffffffffffffffff\0" \
 105        "initrd_high=0xffffffffffffffff\0" \
 106        "linux_image=Image\0" \
 107        "kernel_addr_r=0x81000000\0"\
 108        "fdtfile=apq8016-sbc.dtb\0" \
 109        "fdt_addr_r=0x83000000\0"\
 110        "ramdisk_addr_r=0x84000000\0"\
 111        "scriptaddr=0x90000000\0"\
 112        "pxefile_addr_r=0x90100000\0"\
 113        BOOTENV
 114
 115#define CONFIG_ENV_IS_NOWHERE
 116#define CONFIG_ENV_SIZE                 0x2000
 117#define CONFIG_ENV_VARS_UBOOT_CONFIG
 118
 119/* Size of malloc() pool */
 120#define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
 121
 122/* Monitor Command Prompt */
 123#define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 124#define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 125                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 126#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 127#define CONFIG_SYS_MAXARGS              64      /* max command args */
 128
 129#endif
 130