LXR uboot/include/configs/ds109.h

   1/*
   2 * (C) Copyright 2011
   3 * Jason Cooper <u-boot@lakedaemon.net>
   4 *
   5 * Based on work by:
   6 * Marvell Semiconductor <www.marvell.com>
   7 * Written-by: Siddarth Gore <gores@marvell.com>
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12#ifndef _CONFIG_DS109_H
  13#define _CONFIG_DS109_H
  14
  15/* Provide the MACH_TYPE value that the vendor kernel requires. */
  16#define CONFIG_MACH_TYPE                527
  17
  18/*
  19 * High Level Configuration Options (easy to change)
  20 */
  21#define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  22
  23/*
  24 * Commands configuration
  25 */
  26#define CONFIG_CMD_EXT2
  27#define CONFIG_CMD_FAT
  28
  29/*
  30 * mv-plug-common.h should be defined after CMD configs since it used them
  31 * to enable certain macros
  32 */
  33#include "mv-plug-common.h"
  34
  35/*
  36 *  Environment variables configurations
  37 */
  38#ifdef CONFIG_SPI_FLASH
  39#define CONFIG_ENV_IS_IN_SPI_FLASH      1
  40#define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  41#else
  42#define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  43#endif
  44
  45#ifdef CONFIG_CMD_SF
  46#define CONFIG_HARD_SPI                 1
  47#define CONFIG_KIRKWOOD_SPI             1
  48#define CONFIG_ENV_SPI_BUS              0
  49#define CONFIG_ENV_SPI_CS               0
  50#define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  51#endif
  52
  53/*
  54 * max 4k env size is enough, but in case of nand
  55 * it has to be rounded to sector size
  56 */
  57#define CONFIG_ENV_SIZE                 0x10000
  58#define CONFIG_ENV_ADDR                 0x3d0000
  59#define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
  60
  61/*
  62 * Default environment variables
  63 */
  64#define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  65        "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  66        "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  67        "bootm 0x6400000;"
  68
  69#define CONFIG_EXTRA_ENV_SETTINGS       \
  70        "x_bootcmd_ethernet=ping 192.168.1.2\0" \
  71        "x_bootcmd_usb=usb start\0"     \
  72        "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  73        "x_bootargs=console=ttyS0,115200\0"     \
  74        "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
  75        "ipaddr=192.168.1.5\0"
  76
  77/*
  78 * Ethernet Driver configuration
  79 */
  80#ifdef CONFIG_CMD_NET
  81#define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
  82#define CONFIG_PHY_BASE_ADR     8
  83#endif /* CONFIG_CMD_NET */
  84
  85/*
  86 * SATA Driver configuration
  87 */
  88#ifdef CONFIG_MVSATA_IDE
  89#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  90#endif /*CONFIG_MVSATA_IDE*/
  91
  92#endif /* _CONFIG_DS109_H */
  93