uboot/include/configs/etamin.h
<<
>>
Prefs
   1/*
   2 * (C) Copyright 2013 Siemens Schweiz AG
   3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4 *
   5 * Based on:
   6 * U-Boot file:/include/configs/am335x_evm.h
   7 *
   8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   9 *
  10 * SPDX-License-Identifier:     GPL-2.0+
  11 */
  12
  13#ifndef __CONFIG_ETAMIN_H
  14#define __CONFIG_ETAMIN_H
  15
  16#include "siemens-am33x-common.h"
  17/* NAND specific changes for etamin due to different page size */
  18#undef CONFIG_SYS_NAND_PAGE_SIZE
  19#undef CONFIG_SYS_NAND_OOBSIZE
  20#undef CONFIG_SYS_NAND_BLOCK_SIZE
  21#undef CONFIG_SYS_NAND_ECCPOS
  22#undef CONFIG_SYS_NAND_U_BOOT_OFFS
  23#undef CONFIG_SYS_ENV_SECT_SIZE
  24#undef CONFIG_ENV_OFFSET
  25#undef CONFIG_NAND_OMAP_ECCSCHEME
  26#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
  27
  28#define CONFIG_ENV_OFFSET       0x980000
  29#define CONFIG_SYS_ENV_SECT_SIZE       (512 << 10)     /* 512 KiB */
  30#define CONFIG_SYS_NAND_PAGE_SIZE       4096
  31#define CONFIG_SYS_NAND_OOBSIZE         224
  32#define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * CONFIG_SYS_NAND_PAGE_SIZE)
  33#define CONFIG_SYS_NAND_ECCPOS  { 2, 3, 4, 5, 6, 7, 8, 9, \
  34                                10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
  35                                20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
  36                                30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
  37                                40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
  38                                50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
  39                                60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
  40                                70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
  41                                80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
  42                                90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
  43                        100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
  44                        110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
  45                        120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
  46                        130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
  47                        140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
  48                        150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
  49                        160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
  50                        170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
  51                        180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
  52                        190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
  53                        200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
  54                        }
  55
  56#undef CONFIG_SYS_NAND_ECCSIZE
  57#undef CONFIG_SYS_NAND_ECCBYTES
  58#define CONFIG_SYS_NAND_ECCSIZE 512
  59#define CONFIG_SYS_NAND_ECCBYTES 26
  60
  61#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
  62
  63#define CONFIG_SYS_NAND_MAX_CHIPS       1
  64
  65#undef CONFIG_SYS_MAX_NAND_DEVICE
  66#define CONFIG_SYS_MAX_NAND_DEVICE      3
  67#define CONFIG_SYS_NAND_BASE2           (0x18000000)    /* physical address */
  68#define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, \
  69                                        CONFIG_SYS_NAND_BASE2}
  70
  71#define CONFIG_SYS_NAND_ONFI_DETECTION
  72#define CONFIG_SYS_MPUCLK       300
  73#define DDR_PLL_FREQ    303
  74#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
  75
  76/* FWD Button = 27
  77 * SRV Button = 87 */
  78#define BOARD_DFU_BUTTON_GPIO   27
  79#define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
  80/* In dfu mode keep led1 on */
  81#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  82        "button_dfu0=27\0" \
  83        "button_dfu1=87\0" \
  84        "led0=3,0,1\0" \
  85        "led1=4,0,0\0" \
  86        "led2=5,0,1\0" \
  87        "led3=87,0,1\0" \
  88        "led4=60,0,1\0" \
  89        "led5=63,0,1\0"
  90
  91#undef CONFIG_CMD_FAT
  92
  93/* Physical Memory Map */
  94#define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
  95
  96/* I2C Configuration */
  97#define CONFIG_SYS_I2C_SPEED            100000
  98
  99#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 100#define EEPROM_ADDR_DDR3 0x90
 101#define EEPROM_ADDR_CHIP 0x120
 102
 103#undef CONFIG_MII
 104#undef CONFIG_PHY_GIGE
 105#define CONFIG_PHY_SMSC
 106
 107#define CONFIG_FACTORYSET
 108
 109/* use both define to compile a SPL compliance test  */
 110/*
 111#define CONFIG_SPL_CMT
 112#define CONFIG_SPL_CMT_DEBUG
 113*/
 114
 115/* nedded by compliance test in read mode */
 116#if defined(CONFIG_SPL_CMT)
 117#define CONFIG_SYS_DCACHE_OFF
 118#endif
 119
 120/* Watchdog */
 121#define CONFIG_OMAP_WATCHDOG
 122
 123/* Define own nand partitions */
 124#define CONFIG_ENV_OFFSET_REDUND        0xB80000
 125#define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 126#define CONFIG_ENV_RANGE                (4 * CONFIG_SYS_ENV_SECT_SIZE)
 127
 128
 129
 130#define CONFIG_DFU_MTD
 131#undef COMMON_ENV_DFU_ARGS
 132#define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 133                                "setenv bootargs ${bootargs};" \
 134                                "mtdparts default;" \
 135                                "draco_led 1;" \
 136                                "dfu 0 mtd 0;" \
 137                                "draco_led 0;\0" \
 138
 139#undef DFU_ALT_INFO_NAND_V2
 140#define DFU_ALT_INFO_NAND_V2 \
 141        "spl mtddev;" \
 142        "spl.backup1 mtddev;" \
 143        "spl.backup2 mtddev;" \
 144        "spl.backup3 mtddev;" \
 145        "u-boot mtddev;" \
 146        "u-boot.env0 mtddev;" \
 147        "u-boot.env1 mtddev;" \
 148        "rootfs mtddevubi" \
 149
 150#undef MTDIDS_NAME_STR
 151#define MTDIDS_NAME_STR         "omap2-nand_concat"
 152#undef MTDIDS_DEFAULT
 153#define MTDIDS_DEFAULT          "nand2=" MTDIDS_NAME_STR
 154
 155#undef MTDPARTS_DEFAULT_V2
 156#define MTDPARTS_DEFAULT_V2     "mtdparts=" MTDIDS_NAME_STR ":" \
 157                                "512k(spl)," \
 158                                "512k(spl.backup1)," \
 159                                "512k(spl.backup2)," \
 160                                "512k(spl.backup3)," \
 161                                "7680k(u-boot)," \
 162                                "2048k(u-boot.env0)," \
 163                                "2048k(u-boot.env1)," \
 164                                "2048k(mtdoops)," \
 165                                "-(rootfs)"
 166
 167#undef MTDPARTS_DEFAULT
 168#define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V2
 169
 170#undef CONFIG_ENV_SETTINGS_NAND_V2
 171#define CONFIG_ENV_SETTINGS_NAND_V2 \
 172        "nand_active_ubi_vol=rootfs_a\0" \
 173        "rootfs_name=rootfs\0" \
 174        "kernel_name=uImage\0"\
 175        "nand_root_fs_type=ubifs rootwait=1\0" \
 176        "nand_args=run bootargs_defaults;" \
 177                "mtdparts default;" \
 178                "setenv ${partitionset_active} true;" \
 179                "if test -n ${A}; then " \
 180                        "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 181                "fi;" \
 182                "if test -n ${B}; then " \
 183                        "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 184                "fi;" \
 185                "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 186                "ubi.mtd=rootfs,${ubi_off};" \
 187                "setenv bootargs ${bootargs} " \
 188                "root=${nand_root} noinitrd ${mtdparts} " \
 189                "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 190                "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 191                "=mtdoops\0" \
 192        COMMON_ENV_DFU_ARGS \
 193                "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 194        COMMON_ENV_NAND_BOOT \
 195                "ubi part rootfs ${ubi_off};" \
 196                "ubifsmount ubi0:${nand_active_ubi_vol};" \
 197                "ubifsload ${kloadaddr} boot/${kernel_name};" \
 198                "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 199                "bootm ${kloadaddr} - ${loadaddr}\0" \
 200        "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 201                "bootm ${kloadaddr} - ${loadaddr}\0" \
 202        COMMON_ENV_NAND_CMDS
 203
 204#ifndef CONFIG_SPL_BUILD
 205
 206#define CONFIG_NAND_CS_INIT
 207#define ETAMIN_NAND_GPMC_CONFIG1        0x00000800
 208#define ETAMIN_NAND_GPMC_CONFIG2        0x001e1e00
 209#define ETAMIN_NAND_GPMC_CONFIG3        0x001e1e00
 210#define ETAMIN_NAND_GPMC_CONFIG4        0x16051807
 211#define ETAMIN_NAND_GPMC_CONFIG5        0x00151e1e
 212#define ETAMIN_NAND_GPMC_CONFIG6        0x16000f80
 213#define CONFIG_MTD_CONCAT
 214
 215/* Default env settings */
 216#define CONFIG_EXTRA_ENV_SETTINGS \
 217        "hostname=etamin\0" \
 218        "ubi_off=4096\0"\
 219        "nand_img_size=0x400000\0" \
 220        "optargs=\0" \
 221        "preboot=draco_led 0\0" \
 222        CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 223        CONFIG_ENV_SETTINGS_V2 \
 224        CONFIG_ENV_SETTINGS_NAND_V2
 225
 226#ifndef CONFIG_RESTORE_FLASH
 227
 228#define CONFIG_BOOTCOMMAND \
 229"if dfubutton; then " \
 230        "run dfu_start; " \
 231        "reset; " \
 232"fi;" \
 233"run nand_boot;" \
 234"run nand_boot_backup;" \
 235"reset;"
 236
 237
 238#else
 239#define CONFIG_BOOTCOMMAND                      \
 240        "setenv autoload no; "                  \
 241        "dhcp; "                                \
 242        "if tftp 80000000 debrick.scr; then "   \
 243                "source 80000000; "             \
 244        "fi"
 245#endif
 246#endif  /* CONFIG_SPL_BUILD */
 247#endif  /* ! __CONFIG_ETAMIN_H */
 248