LXR uboot/include/configs/gplugd.h

   1/*
   2 * (C) Copyright 2011
   3 * eInfochips Ltd. <www.einfochips.com>
   4 * Written-by: Ajay Bhargav <contact@8051projects.net>
   5 *
   6 * Based on Aspenite:
   7 * (C) Copyright 2010
   8 * Marvell Semiconductor <www.marvell.com>
   9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10 * Contributor: Mahavir Jain <mjain@marvell.com>
  11 *
  12 * SPDX-License-Identifier:     GPL-2.0+
  13 */
  14
  15#ifndef __CONFIG_GPLUGD_H
  16#define __CONFIG_GPLUGD_H
  17
  18/*
  19 * High Level Configuration Options
  20 */
  21#define CONFIG_SHEEVA_88SV331xV5        1       /* CPU Core subversion */
  22#define CONFIG_ARMADA100                1       /* SOC Family Name */
  23#define CONFIG_ARMADA168                1       /* SOC Used on this Board */
  24#define CONFIG_MACH_TYPE                MACH_TYPE_GPLUGD /* Machine type */
  25#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27#define CONFIG_SYS_TEXT_BASE    0x00f00000
  28
  29/*
  30 * There is no internal RAM in ARMADA100, using DRAM
  31 * TBD: dcache to be used for this
  32 */
  33#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - 0x00200000)
  34#define CONFIG_NR_DRAM_BANKS_MAX        2
  35
  36/*
  37 * Commands configuration
  38 */
  39
  40/* Disable DCACHE */
  41#define CONFIG_SYS_DCACHE_OFF
  42
  43/* Network configuration */
  44#ifdef CONFIG_CMD_NET
  45#define CONFIG_ARMADA100_FEC
  46
  47/* DHCP Support */
  48#define CONFIG_BOOTP_DHCP_REQUEST_DELAY         50000
  49#endif /* CONFIG_CMD_NET */
  50
  51/* GPIO Support */
  52#define CONFIG_MARVELL_GPIO
  53
  54/* PHY configuration */
  55#define CONFIG_MII
  56#define CONFIG_RESET_PHY_R
  57/* 88E3015 register definition */
  58#define PHY_LED_PAR_SEL_REG             22
  59#define PHY_LED_MAN_REG                 25
  60#define PHY_LED_VAL                     0x5b    /* LINK LED1, ACT LED2 */
  61/* GPIO Configuration for PHY */
  62#define CONFIG_SYS_GPIO_PHY_RST         104     /* GPIO104 */
  63
  64/* Flash Support */
  65
  66/*
  67 * mv-common.h should be defined after CMD configs since it used them
  68 * to enable certain macros
  69 */
  70#include "mv-common.h"
  71
  72#ifdef CONFIG_SYS_NS16550_COM1
  73#undef CONFIG_SYS_NS16550_COM1
  74#endif /* CONFIG_SYS_NS16550_COM1 */
  75
  76#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
  77
  78/*
  79 * Environment variables configurations
  80 */
  81#define CONFIG_ENV_IS_NOWHERE
  82#define CONFIG_ENV_SIZE                 0x4000
  83
  84#ifdef CONFIG_CMD_USB
  85#define CONFIG_USB_EHCI
  86#define CONFIG_USB_EHCI_ARMADA100
  87#define CONFIG_EHCI_IS_TDI
  88#endif /* CONFIG_CMD_USB */
  89
  90#define CONFIG_SUPPORT_VFAT
  91
  92#endif  /* __CONFIG_GPLUGD_H */
  93