uboot/include/configs/imx6_spl.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2014 Gateworks Corporation
   3 * Author: Tim Harvey <tharvey@gateworks.com>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7#ifndef __IMX6_SPL_CONFIG_H
   8#define __IMX6_SPL_CONFIG_H
   9
  10#ifdef CONFIG_SPL
  11
  12#define CONFIG_SPL_FRAMEWORK
  13
  14/*
  15 * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
  16 *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
  17 *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
  18 *  - BOOT ROM stack is at 0x0091FFB8
  19 *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
  20 *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
  21 *    fit between 0x00907000 and 0x00918000.
  22 *  - Additionally the BOOT ROM loads what they consider the firmware image
  23 *    which consists of a 4K header in front of us that contains the IVT, DCD
  24 *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
  25 *    or 64KB
  26 */
  27#define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-omap2/u-boot-spl.lds"
  28#define CONFIG_SPL_TEXT_BASE            0x00908000
  29#define CONFIG_SPL_MAX_SIZE             0x10000
  30#define CONFIG_SPL_STACK                0x0091FFB8
  31/*
  32 * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
  33 * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
  34 * boot media (given that boot media specific offset is configured properly).
  35 */
  36#define CONFIG_SPL_PAD_TO               0x11000
  37
  38/* NAND support */
  39#if defined(CONFIG_SPL_NAND_SUPPORT)
  40#define CONFIG_SPL_NAND_MXS
  41#endif
  42
  43/* MMC support */
  44#if defined(CONFIG_SPL_MMC_SUPPORT)
  45#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  46#define CONFIG_SYS_MONITOR_LEN                  409600  /* 400 KB */
  47#endif
  48
  49/* SATA support */
  50#if defined(CONFIG_SPL_SATA_SUPPORT)
  51#define CONFIG_SPL_SATA_BOOT_DEVICE             0
  52#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION      1
  53#endif
  54
  55/* Define the payload for FAT/EXT support */
  56#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
  57#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME  "u-boot.img"
  58#endif
  59
  60#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
  61#define CONFIG_SPL_BSS_START_ADDR      0x88200000
  62#define CONFIG_SPL_BSS_MAX_SIZE        0x100000         /* 1 MB */
  63#define CONFIG_SYS_SPL_MALLOC_START    0x88300000
  64#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000         /* 1 MB */
  65#define CONFIG_SYS_TEXT_BASE           0x87800000
  66#else
  67#define CONFIG_SPL_BSS_START_ADDR       0x18200000
  68#define CONFIG_SPL_BSS_MAX_SIZE         0x100000        /* 1 MB */
  69#define CONFIG_SYS_SPL_MALLOC_START     0x18300000
  70#define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000        /* 1 MB */
  71#define CONFIG_SYS_TEXT_BASE            0x17800000
  72#endif
  73#endif
  74
  75#endif
  76