LXR uboot/include/configs/intip.h

   1/*
   2 * (C) Copyright 2009
   3 * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4 *
   5 * Based on include/configs/canyonlands.h
   6 * (C) Copyright 2008
   7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8 *
   9 * SPDX-License-Identifier:     GPL-2.0+
  10 */
  11
  12/*
  13 * intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center
  14 */
  15#ifndef __CONFIG_H
  16#define __CONFIG_H
  17
  18/*
  19 * High Level Configuration Options
  20 */
  21/*
  22 * This config file is used for CompactCenter(codename intip) and DevCon-Center
  23 */
  24#define CONFIG_460EX            1       /* Specific PPC460EX            */
  25#ifdef CONFIG_DEVCONCENTER
  26#define CONFIG_HOSTNAME         devconcenter
  27#else
  28#define CONFIG_HOSTNAME         intip
  29#endif
  30#define CONFIG_440              1
  31
  32#ifndef CONFIG_SYS_TEXT_BASE
  33#define CONFIG_SYS_TEXT_BASE    0xFFFA0000
  34#endif
  35
  36/*
  37 * Include common defines/options for all AMCC eval boards
  38 */
  39#include "amcc-common.h"
  40
  41#define CONFIG_SYS_CLK_FREQ     66666667        /* external freq to pll */
  42
  43#define CONFIG_BOARD_EARLY_INIT_R       1       /* Call board_early_init_r */
  44#define CONFIG_MISC_INIT_R              1       /* Call misc_init_r */
  45#define CONFIG_BOARD_TYPES              1       /* support board types */
  46#define CFG_ALT_MEMTEST
  47
  48/*
  49 * Base addresses -- Note these are effective addresses where the
  50 * actual resources get mapped (not physical addresses)
  51 */
  52#define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped PCI memory */
  53#define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs */
  54#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
  55
  56/* EBC stuff */
  57#ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
  58#define CONFIG_SYS_FLASH_BASE           0xF8000000      /* later mapped here */
  59#define CONFIG_SYS_FLASH_SIZE           (128 << 20)
  60#else
  61#define CONFIG_SYS_FLASH_BASE           0xFC000000      /* later mapped here */
  62#define CONFIG_SYS_FLASH_SIZE           (64 << 20)
  63#endif
  64
  65#define CONFIG_SYS_NVRAM_BASE           0xE0000000
  66#define CONFIG_SYS_UART_BASE            0xE0100000
  67#define CONFIG_SYS_IO_BASE              0xE0200000
  68
  69#define CONFIG_SYS_BOOT_BASE_ADDR       0xFF000000      /* EBC Boot Space */
  70#define CONFIG_SYS_FLASH_BASE_PHYS_H    0x4
  71#ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
  72#define CONFIG_SYS_FLASH_BASE_PHYS_L    0xC8000000
  73#else
  74#define CONFIG_SYS_FLASH_BASE_PHYS_L    0xCC000000
  75#endif
  76#define CONFIG_SYS_FLASH_BASE_PHYS \
  77        (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
  78        | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
  79
  80#define CONFIG_SYS_OCM_BASE             0xE3000000      /* OCM: 64k */
  81#define CONFIG_SYS_SRAM_BASE            0xE8000000      /* SRAM: 256k */
  82#define CONFIG_SYS_SRAM_SIZE            (256 << 10)
  83#define CONFIG_SYS_LOCAL_CONF_REGS      0xEF000000
  84
  85#define CONFIG_SYS_AHB_BASE             0xE2000000      /* int. AHB periph. */
  86
  87/*
  88 * Initial RAM & stack pointer (placed in OCM)
  89 */
  90#define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_BASE     /* OCM */
  91#define CONFIG_SYS_INIT_RAM_SIZE        (4 << 10)
  92#define CONFIG_SYS_GBL_DATA_OFFSET \
  93        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  94#define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  95
  96/*
  97 * Serial Port
  98 */
  99#define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 100
 101/*
 102 * Environment
 103 */
 104/*
 105 * Define here the location of the environment variables (FLASH).
 106 */
 107#define CONFIG_ENV_IS_IN_FLASH  1       /* use FLASH for environment vars */
 108#define CONFIG_SYS_NOR_CS               0       /* NOR chip connected to CSx */
 109
 110/*
 111 * FLASH related
 112 */
 113#define CONFIG_SYS_FLASH_CFI            /* The flash is CFI compatible  */
 114#define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 115#define CONFIG_SYS_FLASH_CFI_AMD_RESET  1       /* Use AMD reset cmd */
 116
 117#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 118#define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 119#ifdef CONFIG_DEVCONCENTER
 120#define CONFIG_SYS_MAX_FLASH_SECT       1024    /* max num of sectors per chip*/
 121#else
 122#define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sectors per chip*/
 123#endif
 124
 125#define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase/ms */
 126#define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write/ms */
 127
 128#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* buff'd writes (20x faster) */
 129#define CONFIG_SYS_FLASH_EMPTY_INFO     /* 'E' for empty sector on flinfo */
 130
 131#ifdef CONFIG_ENV_IS_IN_FLASH
 132#define CONFIG_ENV_SECT_SIZE    0x20000         /* size of one complete sector*/
 133#define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 134#define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector */
 135
 136/* Address and size of Redundant Environment Sector     */
 137#define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 138#define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 139#endif /* CONFIG_ENV_IS_IN_FLASH */
 140
 141/*
 142 * DDR SDRAM
 143 */
 144
 145#define CONFIG_AUTOCALIB        "silent\0"      /* default is non-verbose    */
 146
 147#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration   */
 148#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION        /* dynamic DDR autocal debug */
 149#undef CONFIG_PPC4xx_DDR_METHOD_A
 150
 151/* DDR1/2 SDRAM Device Control Register Data Values */
 152/* Memory Queue */
 153#define CONFIG_SYS_SDRAM_R0BAS          0x0000f800
 154#define CONFIG_SYS_SDRAM_R1BAS          0x00000000
 155#define CONFIG_SYS_SDRAM_R2BAS          0x00000000
 156#define CONFIG_SYS_SDRAM_R3BAS          0x00000000
 157#define CONFIG_SYS_SDRAM_PLBADDULL      0x00000000
 158#define CONFIG_SYS_SDRAM_PLBADDUHB      0x00000008
 159#define CONFIG_SYS_SDRAM_CONF1LL        0x80001C00
 160#define CONFIG_SYS_SDRAM_CONF1HB        0x80001C80
 161#define CONFIG_SYS_SDRAM_CONFPATHB      0x10a68000
 162
 163/* SDRAM Controller */
 164#define CONFIG_SYS_SDRAM0_MB0CF         0x00000201
 165#define CONFIG_SYS_SDRAM0_MB1CF         0x00000000
 166#define CONFIG_SYS_SDRAM0_MB2CF         0x00000000
 167#define CONFIG_SYS_SDRAM0_MB3CF         0x00000000
 168#define CONFIG_SYS_SDRAM0_MCOPT1        0x05120000
 169#define CONFIG_SYS_SDRAM0_MCOPT2        0x00000000
 170#define CONFIG_SYS_SDRAM0_MODT0         0x00000000
 171#define CONFIG_SYS_SDRAM0_MODT1         0x00000000
 172#define CONFIG_SYS_SDRAM0_MODT2         0x00000000
 173#define CONFIG_SYS_SDRAM0_MODT3         0x00000000
 174#define CONFIG_SYS_SDRAM0_CODT          0x00000020
 175#define CONFIG_SYS_SDRAM0_RTR           0x06180000
 176#define CONFIG_SYS_SDRAM0_INITPLR0      0xA8380000
 177#define CONFIG_SYS_SDRAM0_INITPLR1      0x81900400
 178#define CONFIG_SYS_SDRAM0_INITPLR2      0x81020000
 179#define CONFIG_SYS_SDRAM0_INITPLR3      0x81030000
 180#define CONFIG_SYS_SDRAM0_INITPLR4      0x81010002
 181#define CONFIG_SYS_SDRAM0_INITPLR5      0xE4000552
 182#define CONFIG_SYS_SDRAM0_INITPLR6      0x81900400
 183#define CONFIG_SYS_SDRAM0_INITPLR7      0x8A880000
 184#define CONFIG_SYS_SDRAM0_INITPLR8      0x8A880000
 185#define CONFIG_SYS_SDRAM0_INITPLR9      0x8A880000
 186#define CONFIG_SYS_SDRAM0_INITPLR10     0x8A880000
 187#define CONFIG_SYS_SDRAM0_INITPLR11     0x81000452
 188#define CONFIG_SYS_SDRAM0_INITPLR12     0x81010382
 189#define CONFIG_SYS_SDRAM0_INITPLR13     0x81010002
 190#define CONFIG_SYS_SDRAM0_INITPLR14     0x00000000
 191#define CONFIG_SYS_SDRAM0_INITPLR15     0x00000000
 192#define CONFIG_SYS_SDRAM0_RQDC          0x80000038
 193#define CONFIG_SYS_SDRAM0_RFDC          0x00000257
 194#define CONFIG_SYS_SDRAM0_RDCC          0x40000000
 195#define CONFIG_SYS_SDRAM0_DLCR          0x00000000
 196#define CONFIG_SYS_SDRAM0_CLKTR         0x40000000
 197#define CONFIG_SYS_SDRAM0_WRDTR         0x86000823
 198#define CONFIG_SYS_SDRAM0_SDTR1         0x80201000
 199#define CONFIG_SYS_SDRAM0_SDTR2         0x32204232
 200#define CONFIG_SYS_SDRAM0_SDTR3         0x090C0D15
 201#define CONFIG_SYS_SDRAM0_MMODE         0x00000452
 202#define CONFIG_SYS_SDRAM0_MEMODE        0x00000002
 203
 204#define CONFIG_SYS_MBYTES_SDRAM 256     /* 256MB */
 205
 206/*
 207 * I2C
 208 */
 209#define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 210
 211#define CONFIG_SYS_I2C_EEPROM_ADDR              (0xa8>>1)
 212#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 213#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 214#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 215
 216/* I2C bootstrap EEPROM */
 217#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR       0x54
 218#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET     0
 219#define CONFIG_4xx_CONFIG_BLOCKSIZE             16
 220
 221/* I2C SYSMON */
 222#define CONFIG_DTT_LM63         1       /* National LM63        */
 223#define CONFIG_DTT_SENSORS      { 0 }   /* Sensor addresses     */
 224#define CONFIG_DTT_PWM_LOOKUPTABLE      \
 225        { { 40, 10 }, { 50, 20 }, { 60, 40 } }
 226#define CONFIG_DTT_TACH_LIMIT   0xa10
 227
 228/* RTC configuration */
 229#define CONFIG_RTC_DS1337       1
 230#define CONFIG_SYS_I2C_RTC_ADDR 0x68
 231
 232/*
 233 * Ethernet
 234 */
 235#define CONFIG_IBM_EMAC4_V4     1
 236
 237#define CONFIG_HAS_ETH0
 238#define CONFIG_HAS_ETH1
 239
 240#define CONFIG_PHY_ADDR         2       /* PHY address, See schematics  */
 241#define CONFIG_PHY1_ADDR        3
 242
 243#define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
 244#define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 245#define CONFIG_PHY_DYNAMIC_ANEG 1
 246
 247/*
 248 * USB-OHCI
 249 */
 250#define CONFIG_USB_OHCI_NEW
 251#undef CONFIG_SYS_OHCI_BE_CONTROLLER    /* 460EX has little endian descriptors*/
 252#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register */
 253#define CONFIG_SYS_OHCI_USE_NPS         /* force NoPowerSwitching mode */
 254#define CONFIG_SYS_USB_OHCI_REGS_BASE   (CONFIG_SYS_AHB_BASE | 0xd0000)
 255#define CONFIG_SYS_USB_OHCI_SLOT_NAME   "ppc440"
 256#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 257
 258/*
 259 * Default environment variables
 260 */
 261#define CONFIG_EXTRA_ENV_SETTINGS                                       \
 262        CONFIG_AMCC_DEF_ENV                                             \
 263        CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 264        CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 265        "kernel_addr=fc000000\0"                                        \
 266        "fdt_addr=fc1e0000\0"                                           \
 267        "ramdisk_addr=fc200000\0"                                       \
 268        "pciconfighost=1\0"                                             \
 269        "pcie_mode=RP:RP\0"                                             \
 270        ""
 271
 272/*
 273 * Commands additional to the ones defined in amcc-common.h
 274 */
 275#define CONFIG_CMD_DTT
 276#define CONFIG_CMD_PCI
 277#define CONFIG_CMD_SDRAM
 278
 279/* Partitions */
 280
 281/*
 282 * PCI stuff
 283 */
 284/* General PCI */
 285#define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 286#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 287#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 288#define CONFIG_PCI_DISABLE_PCIE
 289
 290/* Board-specific PCI */
 291#define CONFIG_SYS_PCI_TARGET_INIT      /* let board init pci target */
 292#undef  CONFIG_SYS_PCI_MASTER_INIT
 293
 294#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM */
 295#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 296
 297/*
 298 * External Bus Controller (EBC) Setup
 299 */
 300
 301/*
 302 * CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
 303 * boot EBC mapping only supports a maximum of 16MBytes
 304 * (4.ff00.0000 - 4.ffff.ffff).
 305 * To solve this problem, the FLASH has to get remapped to another
 306 * EBC address which accepts bigger regions:
 307 *
 308 * 0xfc00.0000 -> 4.cc00.0000
 309 */
 310
 311/* Memory Bank 0 (NOR-FLASH) initialization */
 312#define CONFIG_SYS_EBC_PB0AP            0x10055e00
 313#define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
 314
 315/* Memory Bank 1 (NVRAM) initialization */
 316#define CONFIG_SYS_EBC_PB1AP            0x02815480
 317/* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
 318#define CONFIG_SYS_EBC_PB1CR            (CONFIG_SYS_NVRAM_BASE | 0x18000)
 319
 320/* Memory Bank 2 (UART) initialization  */
 321#define CONFIG_SYS_EBC_PB2AP            0x02815480
 322/* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
 323#define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_UART_BASE | 0x1A000)
 324
 325/* Memory Bank 3 (IO) initialization */
 326#define CONFIG_SYS_EBC_PB3AP            0x02815480
 327/* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
 328#define CONFIG_SYS_EBC_PB3CR            (CONFIG_SYS_IO_BASE | 0x1A000)
 329
 330/*
 331 * PPC4xx GPIO Configuration
 332 */
 333/* 460EX: Use USB configuration */
 334#define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 335{                                                                                       \
 336/* GPIO Core 0 */                                                                       \
 337{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0)      USB2HostD(0)    */      \
 338{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1)      USB2HostD(1)    */      \
 339{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2)      USB2HostD(2)    */      \
 340{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3)      USB2HostD(3)    */      \
 341{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4)      USB2HostD(4)    */      \
 342{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5)      USB2HostD(5)    */      \
 343{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6)      USB2HostD(6)    */      \
 344{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7)      USB2HostD(7)    */      \
 345{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0)      USB2OTGD(0)     */      \
 346{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1)      USB2OTGD(1)     */      \
 347{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)     USB2OTGD(2)     */      \
 348{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)     USB2OTGD(3)     */      \
 349{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)     USB2OTGD(4)     */      \
 350{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)     USB2OTGD(5)     */      \
 351{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)     USB2OTGD(6)     */      \
 352{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)     USB2OTGD(7)     */      \
 353{GPIO0_BASE, GPIO_IN , GPIO_SEL,  GPIO_OUT_0}, /* GPIO16 GMC1TxER       USB2HostStop    */      \
 354{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD         USB2HostNext    */      \
 355{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER       USB2HostDir     */      \
 356{GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO19 GMC1TxEN       USB2OTGStop     */      \
 357{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS        USB2OTGNext     */      \
 358{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV       USB2OTGDir      */      \
 359{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY                          */      \
 360{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN                          */      \
 361{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN                          */      \
 362{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE                          */      \
 363{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE                          */      \
 364{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)                         */      \
 365{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)                         */      \
 366{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)                         */      \
 367{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0        DMAReq2         IRQ(7)*/ \
 368{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1        DMAAck2         IRQ(8)*/ \
 369},                                                                                      \
 370{                                                                                       \
 371/* GPIO Core 1 */                                                                       \
 372{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2        EOT2/TC2        IRQ(9)*/ \
 373{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3        DMAReq3         IRQ(4)*/ \
 374{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N    UART1_DSR_CTS_N UART2_SOUT*/ \
 375{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
 376{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3       UART3_SIN*/ \
 377{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N    EOT3/TC3        UART3_SOUT*/ \
 378{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N    UART1_SOUT      */      \
 379{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N     UART1_SIN       */      \
 380{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)                         */      \
 381{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)                          */      \
 382{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)                          */      \
 383{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)          DMAReq1         IRQ(10)*/ \
 384{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)          DMAAck1         IRQ(11)*/ \
 385{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)          EOT/TC1         IRQ(12)*/ \
 386{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)     DMAReq0         IRQ(13)*/ \
 387{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)     DMAAck0         IRQ(14)*/ \
 388{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)     EOT/TC0         IRQ(15)*/ \
 389{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit  */      \
 390{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  USB_SERVICE_SUSPEND_N         */      \
 391{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51  SPI_CSS_N                     */      \
 392{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52  FPGA_PROGRAM_UC_N             */      \
 393{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  FPGA_INIT_UC_N                */      \
 394{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54  WD_STROBE                     */      \
 395{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55  LED_2_OUT                     */      \
 396{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56  LED_1_OUT                     */      \
 397{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit  */      \
 398{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit  */      \
 399{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit  */      \
 400{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit  */      \
 401{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61  STARTUP_FINISHED_N            */      \
 402{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62  STARTUP_FINISHED              */      \
 403{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  SERVICE_PORT_ACTIVE           */      \
 404}                                                                                       \
 405}
 406
 407#endif  /* __CONFIG_H */
 408