LXR uboot/include/configs/o2d300.h

   1/*
   2 * (C) Copyright 2012
   3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8/*
   9 * Valid values for CONFIG_SYS_TEXT_BASE are:
  10 * 0xFC000000   boot low boot high (standard configuration)
  11 * 0x00100000   boot from RAM (for testing only)
  12 */
  13#ifndef CONFIG_SYS_TEXT_BASE
  14#define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
  15#endif
  16
  17/* Board specific flash config */
  18#define CONFIG_SYS_FLASH_BASE           0xfc000000
  19#define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
  20/* max number of sectors on one chip */
  21#define CONFIG_SYS_MAX_FLASH_SECT       512
  22
  23/*
  24 * Include common defines for all ifm boards
  25 */
  26#include "o2dnt-common.h"
  27
  28/*
  29 * GPIO configuration:
  30 * CS1 SDRAM activate + no CAN + no PCI
  31 */
  32#define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
  33
  34/* Other board specific configs */
  35#define CONFIG_SYS_BOOTCS_CFG           0x00057d01
  36#define CONFIG_SYS_RESET_ADDRESS        0xfc000000
  37
  38#define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  39#define CONFIG_SYS_MEMTEST_END          0x07f00000      /* 1 - 127 MB in DRAM */
  40
  41/* Use redundant environment */
  42#define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
  43#define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
  44
  45#define CONFIG_BOARD_NAME               "o2d300"
  46#define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
  47#define CONFIG_BOARD_MEM_LIMIT          __stringify(126)
  48#define BOARD_POST_CRC32_END            __stringify(0x02000000)
  49
  50#define CONFIG_EXTRA_ENV_SETTINGS                                       \
  51        CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  52        CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  53        CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  54        "autoload=no\0"                                                 \
  55        "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
  56        "flash_mtd=run mtd_args addip addmem;"                          \
  57                "bootm ${kernel_addr}\0"                                \
  58        "mtd_args=setenv bootargs root=/dev/mtdblock4 "                 \
  59                "rw rootfstype=cramfs\0"                                \
  60        "linbot=fc080000\0"                                             \
  61        "lintop=fc17ffff\0"                                             \
  62        "rambot=fc180000\0"                                             \
  63        "ramtop=fc57ffff\0"                                             \
  64        "jffbot=fc580000\0"                                             \
  65        "jfftop=fd39ffff\0"                                             \
  66        "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
  67        "ubotop=fc03ffff\0"                                             \
  68        "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"      \
  69        "halbot=fd3a0000\0"                                             \
  70        "haltop=fdf9ffff\0"                                             \
  71        "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"     \
  72                "cp.b ${fileaddr} ${halbot} ${filesize}\0"              \
  73        "kernel_addr=0xfc060000\0"                                      \
  74        "ramdisk_addr=0xfc160000\0"                                     \
  75        "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
  76                "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
  77        "netretry=once\0"                                               \
  78        "protcmd=protect on ${linbot} ${lintop};"                       \
  79                "protect on ${rambot} ${ramtop}\0"                      \
  80        "o2derror=def_env\0"                                            \
  81        "sensorType=O2D300AA\0"
  82