LXR uboot/include/configs/o2i.h

   1/*
   2 * (C) Copyright 2012
   3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8/*
   9 * Valid values for CONFIG_SYS_TEXT_BASE are:
  10 * 0xFF000000   boot low boot high (standard configuration)
  11 * 0x00100000   boot from RAM (for testing only)
  12 */
  13#ifndef CONFIG_SYS_TEXT_BASE
  14#define CONFIG_SYS_TEXT_BASE    0xff000000      /* Standard: boot low */
  15#endif
  16
  17/* Board specific flash config */
  18#define CONFIG_SYS_FLASH_BASE           0xff000000
  19#define CONFIG_SYS_FLASH_SIZE           0x01000000      /* maximum 16MB */
  20/* max number of sectors on one chip */
  21#define CONFIG_SYS_MAX_FLASH_SECT       128
  22
  23/*
  24 * Include common defines for all ifm boards
  25 */
  26#include "o2dnt-common.h"
  27
  28/* GPIO configuration */
  29#define CONFIG_SYS_GPS_PORT_CONFIG      0x00002006      /* no CAN */
  30
  31/* Other board specific configs */
  32#define CONFIG_SYS_BOOTCS_CFG           0x00087801
  33#define CONFIG_SYS_RESET_ADDRESS        0xff000000
  34
  35#define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  36#define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM  */
  37
  38#define CONFIG_BOARD_NAME               "o2i"
  39#define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
  40#define CONFIG_BOARD_MEM_LIMIT          __stringify(62)
  41#define BOARD_POST_CRC32_END            __stringify(0x01000000)
  42
  43#define CONFIG_EXTRA_ENV_SETTINGS                                       \
  44        CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  45        CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  46        CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  47        "linbot=ff060000\0"                                             \
  48        "lintop=ff15ffff\0"                                             \
  49        "rambot=ff160000\0"                                             \
  50        "ramtop=ff55ffff\0"                                             \
  51        "jffbot=ff560000\0"                                             \
  52        "jfftop=ffebffff\0"                                             \
  53        "kernel_addr=0xff060000\0"                                      \
  54        "ramdisk_addr=0xff160000\0"                                     \
  55        "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
  56        "ubotop=ff03ffff\0"                                             \
  57        "autoload=no\0"                                                 \
  58        "dhcp_boot=run dhcpcmd; run flash_mtd\0"                        \
  59        "hostname=IFM_SENSOR\0"                                         \
  60        "flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0"    \
  61        "mtd_args=setenv bootargs root=/dev/mtdblock3 "                 \
  62                "rw rootfstype=cramfs\0"                                \
  63        "sensorType=O2I100AA\0"                                         \
  64        "netretry=once\0"                                               \
  65        "master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};"           \
  66                "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
  67