LXR uboot/include/configs/o2mnt.h

   1/*
   2 * (C) Copyright 2012
   3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8/*
   9 * Valid values for CONFIG_SYS_TEXT_BASE are:
  10 * 0xFF000000   boot low boot high (standard configuration)
  11 * 0x00100000   boot from RAM (for testing only)
  12 */
  13#ifndef CONFIG_SYS_TEXT_BASE
  14#define CONFIG_SYS_TEXT_BASE    0xff000000      /* Standard: boot low */
  15#endif
  16
  17/* Board specific flash config */
  18#define CONFIG_SYS_FLASH_BASE           0xff000000
  19#define CONFIG_SYS_FLASH_SIZE           0x01000000      /* maximum 16MB */
  20/* max number of sectors on one chip */
  21#define CONFIG_SYS_MAX_FLASH_SECT       128
  22
  23/*
  24 * Include common defines for all ifm boards
  25 */
  26#include "o2dnt-common.h"
  27
  28/* GPIO configuration */
  29#define CONFIG_SYS_GPS_PORT_CONFIG      0x00002004      /* no CAN */
  30
  31/* Other board specific configs */
  32#define CONFIG_NETCONSOLE
  33
  34#define CONFIG_SYS_BOOTCS_CFG           0x00087801
  35#define CONFIG_SYS_RESET_ADDRESS        0xff000000
  36
  37#define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  38#define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM  */
  39
  40#define CONFIG_BOARD_NAME               "o2mnt"
  41#define CONFIG_BOARD_BOOTCMD            "${newcmd}"
  42#define CONFIG_BOARD_MEM_LIMIT          __stringify(62)
  43#define BOARD_POST_CRC32_END            __stringify(0x01000000)
  44
  45#ifndef CONFIG_IFM_SENSOR_TYPE
  46#define CONFIG_IFM_SENSOR_TYPE          "O2M110"
  47#endif
  48
  49#define CONFIG_EXTRA_ENV_SETTINGS                                       \
  50        CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  51        CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  52        CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  53        "linbot=ff060000\0"                                             \
  54        "lintop=ff25ffff\0"                                             \
  55        "rambot=ff260000\0"                                             \
  56        "ramtop=ffc5ffff\0"                                             \
  57        "jffbot=ffc60000\0"                                             \
  58        "jfftop=ffffffff\0"                                             \
  59        "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"               \
  60        "ubotop=ff03ffff\0"                                             \
  61        "kernel_addr=0xff060000\0"                                      \
  62        "ramdisk_addr=0xff260000\0"                                     \
  63        "newcmd=run scrprot;run flash_ext2\0"                           \
  64        "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "  \
  65                "${ramtop}\0"                                           \
  66        "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"   \
  67        "ext2args=setenv bootargs root=/dev/mtdblock3 ro "              \
  68                "rootfstype=ext2\0"                                     \
  69        "pwm=mw f0000674 0x10006;mw f0000678 0x30000;"                  \
  70                "mw f0000678 0x30001;mw f0000670 0x3\0"                 \
  71        "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"           \
  72                "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"       \
  73        "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"                          \
  74        "srelease=0.00\0"
  75