LXR uboot/include/netdev.h

   1/*
   2 * (C) Copyright 2008
   3 * Benjamin Warren, biggerbadderben@gmail.com
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8/*
   9 * netdev.h - definitions an prototypes for network devices
  10 */
  11
  12#ifndef _NETDEV_H_
  13#define _NETDEV_H_
  14
  15/*
  16 * Board and CPU-specific initialization functions
  17 * board_eth_init() has highest priority.  cpu_eth_init() only
  18 * gets called if board_eth_init() isn't instantiated or fails.
  19 * Return values:
  20 *      0: success
  21 *     -1: failure
  22 */
  23
  24int board_eth_init(bd_t *bis);
  25int cpu_eth_init(bd_t *bis);
  26
  27/* Driver initialization prototypes */
  28int at91emac_register(bd_t *bis, unsigned long iobase);
  29int au1x00_enet_initialize(bd_t*);
  30int ax88180_initialize(bd_t *bis);
  31int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
  32int bfin_EMAC_initialize(bd_t *bis);
  33int calxedaxgmac_initialize(u32 id, ulong base_addr);
  34int cs8900_initialize(u8 dev_num, int base_addr);
  35int davinci_emac_initialize(void);
  36int dc21x4x_initialize(bd_t *bis);
  37int designware_initialize(ulong base_addr, u32 interface);
  38int dm9000_initialize(bd_t *bis);
  39int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
  40int e1000_initialize(bd_t *bis);
  41int eepro100_initialize(bd_t *bis);
  42int enc28j60_initialize(unsigned int bus, unsigned int cs,
  43        unsigned int max_hz, unsigned int mode);
  44int ep93xx_eth_initialize(u8 dev_num, int base_addr);
  45int eth_3com_initialize (bd_t * bis);
  46int ethoc_initialize(u8 dev_num, int base_addr);
  47int fec_initialize (bd_t *bis);
  48int fecmxc_initialize(bd_t *bis);
  49int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
  50int ftgmac100_initialize(bd_t *bits);
  51int ftmac100_initialize(bd_t *bits);
  52int ftmac110_initialize(bd_t *bits);
  53void gt6426x_eth_initialize(bd_t *bis);
  54int ks8851_mll_initialize(u8 dev_num, int base_addr);
  55int lan91c96_initialize(u8 dev_num, int base_addr);
  56int lpc32xx_eth_initialize(bd_t *bis);
  57int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
  58int mcdmafec_initialize(bd_t *bis);
  59int mcffec_initialize(bd_t *bis);
  60int mpc512x_fec_initialize(bd_t *bis);
  61int mpc5xxx_fec_initialize(bd_t *bis);
  62int mpc82xx_scc_enet_initialize(bd_t *bis);
  63int mvgbe_initialize(bd_t *bis);
  64int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
  65int natsemi_initialize(bd_t *bis);
  66int ne2k_register(void);
  67int npe_initialize(bd_t *bis);
  68int ns8382x_initialize(bd_t *bis);
  69int pcnet_initialize(bd_t *bis);
  70int ppc_4xx_eth_initialize (bd_t *bis);
  71int rtl8139_initialize(bd_t *bis);
  72int rtl8169_initialize(bd_t *bis);
  73int scc_initialize(bd_t *bis);
  74int sh_eth_initialize(bd_t *bis);
  75int skge_initialize(bd_t *bis);
  76int smc91111_initialize(u8 dev_num, int base_addr);
  77int smc911x_initialize(u8 dev_num, int base_addr);
  78int tsi108_eth_initialize(bd_t *bis);
  79int uec_standard_init(bd_t *bis);
  80int uli526x_initialize(bd_t *bis);
  81int armada100_fec_register(unsigned long base_addr);
  82int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
  83                                                unsigned long ctrl_addr);
  84/*
  85 * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
  86 * exported by a public hader file, we need a global definition at this point.
  87 */
  88#if defined(CONFIG_XILINX_LL_TEMAC)
  89#define XILINX_LL_TEMAC_M_FIFO          0       /* use FIFO Ctrl */
  90#define XILINX_LL_TEMAC_M_SDMA_PLB      (1 << 0)/* use SDMA Ctrl via PLB */
  91#define XILINX_LL_TEMAC_M_SDMA_DCR      (1 << 1)/* use SDMA Ctrl via DCR */
  92#endif
  93
  94/* Boards with PCI network controllers can call this from their board_eth_init()
  95 * function to initialize whatever's on board.
  96 * Return value is total # of devices found */
  97
  98static inline int pci_eth_init(bd_t *bis)
  99{
 100        int num = 0;
 101
 102#ifdef CONFIG_PCI
 103
 104#ifdef CONFIG_EEPRO100
 105        num += eepro100_initialize(bis);
 106#endif
 107#ifdef CONFIG_TULIP
 108        num += dc21x4x_initialize(bis);
 109#endif
 110#ifdef CONFIG_E1000
 111        num += e1000_initialize(bis);
 112#endif
 113#ifdef CONFIG_PCNET
 114        num += pcnet_initialize(bis);
 115#endif
 116#ifdef CONFIG_NATSEMI
 117        num += natsemi_initialize(bis);
 118#endif
 119#ifdef CONFIG_NS8382X
 120        num += ns8382x_initialize(bis);
 121#endif
 122#if defined(CONFIG_RTL8139)
 123        num += rtl8139_initialize(bis);
 124#endif
 125#if defined(CONFIG_RTL8169)
 126        num += rtl8169_initialize(bis);
 127#endif
 128#if defined(CONFIG_ULI526X)
 129        num += uli526x_initialize(bis);
 130#endif
 131
 132#endif  /* CONFIG_PCI */
 133        return num;
 134}
 135
 136struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
 137#ifdef CONFIG_PHYLIB
 138struct phy_device;
 139int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
 140                struct mii_dev *bus, struct phy_device *phydev);
 141#else
 142/*
 143 * Allow FEC to fine-tune MII configuration on boards which require this.
 144 */
 145int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
 146#endif
 147
 148#endif /* _NETDEV_H_ */
 149