1/* 2 * (C) Copyright 2010, 2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8#ifndef _WARM_BOOT_H_ 9#define _WARM_BOOT_H_ 10 11#define STRAP_OPT_A_RAM_CODE_SHIFT 4 12#define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT) 13 14/* Defines the supported operating modes */ 15enum fuse_operating_mode { 16 MODE_PRODUCTION = 3, 17 MODE_UNDEFINED, 18}; 19 20/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */ 21enum { 22 HASH_LENGTH = 4 23}; 24 25/* Defines the storage for a hash value (128 bits) */ 26struct hash { 27 u32 hash[HASH_LENGTH]; 28}; 29 30/* 31 * Defines the code header information for the boot rom. 32 * 33 * The code immediately follows the code header. 34 * 35 * Note that the code header needs to be 16 bytes aligned to preserve 36 * the alignment of relevant data for hash and decryption computations without 37 * requiring extra copies to temporary memory areas. 38 */ 39struct wb_header { 40 u32 length_insecure; /* length of the code header */ 41 u32 reserved[3]; 42 struct hash hash; /* hash of header+code, starts next field*/ 43 struct hash random_aes_block; /* a data block to aid security. */ 44 u32 length_secure; /* length of the code header */ 45 u32 destination; /* destination address to put the wb code */ 46 u32 entry_point; /* execution address of the wb code */ 47 u32 code_length; /* length of the code */ 48}; 49 50/* 51 * The warm boot code needs direct access to these registers since it runs in 52 * SRAM and cannot call other U-Boot code. 53 */ 54union osc_ctrl_reg { 55 struct { 56 u32 xoe:1; 57 u32 xobp:1; 58 u32 reserved0:2; 59 u32 xofs:6; 60 u32 reserved1:2; 61 u32 xods:5; 62 u32 reserved2:3; 63 u32 oscfi_spare:8; 64 u32 pll_ref_div:2; 65 u32 osc_freq:2; 66 }; 67 u32 word; 68}; 69 70union pllx_base_reg { 71 struct { 72 u32 divm:5; 73 u32 reserved0:3; 74 u32 divn:10; 75 u32 reserved1:2; 76 u32 divp:3; 77 u32 reserved2:4; 78 u32 lock:1; 79 u32 reserved3:1; 80 u32 ref_dis:1; 81 u32 enable:1; 82 u32 bypass:1; 83 }; 84 u32 word; 85}; 86 87union pllx_misc_reg { 88 struct { 89 u32 vcocon:4; 90 u32 lfcon:4; 91 u32 cpcon:4; 92 u32 lock_sel:6; 93 u32 reserved0:1; 94 u32 lock_enable:1; 95 u32 reserved1:1; 96 u32 dccon:1; 97 u32 pts:2; 98 u32 reserved2:6; 99 u32 out1_div_byp:1; 100 u32 out1_inv_clk:1; 101 }; 102 u32 word; 103}; 104 105/* 106 * TODO: This register is not documented in the TRM yet. We could move this 107 * into the EMC and give it a proper interface, but not while it is 108 * undocumented. 109 */ 110union scratch3_reg { 111 struct { 112 u32 pllx_base_divm:5; 113 u32 pllx_base_divn:10; 114 u32 pllx_base_divp:3; 115 u32 pllx_misc_lfcon:4; 116 u32 pllx_misc_cpcon:4; 117 }; 118 u32 word; 119}; 120 121 122/** 123 * Save warmboot memory settings for a later resume 124 * 125 * @return 0 if ok, -1 on error 126 */ 127int warmboot_save_sdram_params(void); 128 129int warmboot_prepare_code(u32 seg_address, u32 seg_length); 130int sign_data_block(u8 *source, u32 length, u8 *signature); 131void wb_start(void); /* Start of WB assembly code */ 132void wb_end(void); /* End of WB assembly code */ 133 134#endif 135