LXR uboot/arch/powerpc/cpu/mpc83xx/fdt.c

   1/*
   2 * Copyright 2007 Freescale Semiconductor, Inc.
   3 *
   4 * (C) Copyright 2000
   5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6 *
   7 * SPDX-License-Identifier:     GPL-2.0+
   8 */
   9
  10#include <common.h>
  11#include <libfdt.h>
  12#include <fdt_support.h>
  13#include <asm/processor.h>
  14
  15extern void ft_qe_setup(void *blob);
  16
  17DECLARE_GLOBAL_DATA_PTR;
  18
  19#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
  20        (defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
  21#include <linux/immap_qe.h>
  22
  23void fdt_fixup_muram (void *blob)
  24{
  25        ulong data[2];
  26
  27        data[0] = 0;
  28        data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
  29        do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
  30                        data, sizeof (data), 0);
  31}
  32#endif
  33
  34void ft_cpu_setup(void *blob, bd_t *bd)
  35{
  36        immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
  37        int spridr = immr->sysconf.spridr;
  38
  39        /*
  40         * delete crypto node if not on an E-processor
  41         * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
  42         * EA revisions got the SEC uprevved to 2.4 but since the default device
  43         * tree contains SEC 2.0 properties we uprev them here.
  44         */
  45        if (!IS_E_PROCESSOR(spridr))
  46                fdt_fixup_crypto_node(blob, 0);
  47        else if (IS_E_PROCESSOR(spridr) &&
  48                 (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
  49                  SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
  50                 REVID_MAJOR(spridr) >= 2)
  51                fdt_fixup_crypto_node(blob, 0x0204);
  52
  53#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
  54    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
  55    defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
  56#ifdef CONFIG_MPC8313
  57        /*
  58        * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
  59        * h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
  60        * so if on Rev. 2 (and higher) h/w, we fix them up here
  61        */
  62        if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
  63                int nodeoffset, path;
  64                const char *prop;
  65
  66                nodeoffset = fdt_path_offset(blob, "/aliases");
  67                if (nodeoffset >= 0) {
  68#if defined(CONFIG_HAS_ETH0)
  69                        prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
  70                        if (prop) {
  71                                u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
  72
  73                                path = fdt_path_offset(blob, prop);
  74                                prop = fdt_getprop(blob, path, "interrupts",
  75                                                   NULL);
  76                                if (prop)
  77                                        fdt_setprop(blob, path, "interrupts",
  78                                                    &tmp, sizeof(tmp));
  79                        }
  80#endif
  81#if defined(CONFIG_HAS_ETH1)
  82                        prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
  83                        if (prop) {
  84                                u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
  85
  86                                path = fdt_path_offset(blob, prop);
  87                                prop = fdt_getprop(blob, path, "interrupts",
  88                                                   NULL);
  89                                if (prop)
  90                                        fdt_setprop(blob, path, "interrupts",
  91                                                    &tmp, sizeof(tmp));
  92                        }
  93#endif
  94                }
  95        }
  96#endif
  97#endif
  98
  99        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 100                "timebase-frequency", (bd->bi_busfreq / 4), 1);
 101        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 102                "bus-frequency", bd->bi_busfreq, 1);
 103        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 104                "clock-frequency", gd->arch.core_clk, 1);
 105        do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 106                "bus-frequency", bd->bi_busfreq, 1);
 107        do_fixup_by_compat_u32(blob, "fsl,soc",
 108                "bus-frequency", bd->bi_busfreq, 1);
 109        do_fixup_by_compat_u32(blob, "fsl,soc",
 110                "clock-frequency", bd->bi_busfreq, 1);
 111        do_fixup_by_compat_u32(blob, "fsl,immr",
 112                "bus-frequency", bd->bi_busfreq, 1);
 113        do_fixup_by_compat_u32(blob, "fsl,immr",
 114                "clock-frequency", bd->bi_busfreq, 1);
 115#ifdef CONFIG_QE
 116        ft_qe_setup(blob);
 117#endif
 118
 119#ifdef CONFIG_SYS_NS16550
 120        do_fixup_by_compat_u32(blob, "ns16550",
 121                "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 122#endif
 123
 124        fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 125
 126#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
 127        (defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
 128        fdt_fixup_muram (blob);
 129#endif
 130}
 131