uboot/drivers/net/mvneta.c
<<
>>
Prefs
   1/*
   2 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
   3 *
   4 * U-Boot version:
   5 * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
   6 *
   7 * Based on the Linux version which is:
   8 * Copyright (C) 2012 Marvell
   9 *
  10 * Rami Rosen <rosenr@marvell.com>
  11 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  12 *
  13 * SPDX-License-Identifier:     GPL-2.0
  14 */
  15
  16#include <common.h>
  17#include <dm.h>
  18#include <net.h>
  19#include <netdev.h>
  20#include <config.h>
  21#include <malloc.h>
  22#include <asm/io.h>
  23#include <linux/errno.h>
  24#include <phy.h>
  25#include <miiphy.h>
  26#include <watchdog.h>
  27#include <asm/arch/cpu.h>
  28#include <asm/arch/soc.h>
  29#include <linux/compat.h>
  30#include <linux/mbus.h>
  31
  32DECLARE_GLOBAL_DATA_PTR;
  33
  34#if !defined(CONFIG_PHYLIB)
  35# error Marvell mvneta requires PHYLIB
  36#endif
  37
  38/* Some linux -> U-Boot compatibility stuff */
  39#define netdev_err(dev, fmt, args...)           \
  40        printf(fmt, ##args)
  41#define netdev_warn(dev, fmt, args...)          \
  42        printf(fmt, ##args)
  43#define netdev_info(dev, fmt, args...)          \
  44        printf(fmt, ##args)
  45
  46#define CONFIG_NR_CPUS          1
  47#define ETH_HLEN                14      /* Total octets in header */
  48
  49/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
  50#define WRAP                    (2 + ETH_HLEN + 4 + 32)
  51#define MTU                     1500
  52#define RX_BUFFER_SIZE          (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
  53
  54#define MVNETA_SMI_TIMEOUT                      10000
  55
  56/* Registers */
  57#define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
  58#define      MVNETA_RXQ_HW_BUF_ALLOC            BIT(1)
  59#define      MVNETA_RXQ_PKT_OFFSET_ALL_MASK     (0xf    << 8)
  60#define      MVNETA_RXQ_PKT_OFFSET_MASK(offs)   ((offs) << 8)
  61#define MVNETA_RXQ_THRESHOLD_REG(q)             (0x14c0 + ((q) << 2))
  62#define      MVNETA_RXQ_NON_OCCUPIED(v)         ((v) << 16)
  63#define MVNETA_RXQ_BASE_ADDR_REG(q)             (0x1480 + ((q) << 2))
  64#define MVNETA_RXQ_SIZE_REG(q)                  (0x14a0 + ((q) << 2))
  65#define      MVNETA_RXQ_BUF_SIZE_SHIFT          19
  66#define      MVNETA_RXQ_BUF_SIZE_MASK           (0x1fff << 19)
  67#define MVNETA_RXQ_STATUS_REG(q)                (0x14e0 + ((q) << 2))
  68#define      MVNETA_RXQ_OCCUPIED_ALL_MASK       0x3fff
  69#define MVNETA_RXQ_STATUS_UPDATE_REG(q)         (0x1500 + ((q) << 2))
  70#define      MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT  16
  71#define      MVNETA_RXQ_ADD_NON_OCCUPIED_MAX    255
  72#define MVNETA_PORT_RX_RESET                    0x1cc0
  73#define      MVNETA_PORT_RX_DMA_RESET           BIT(0)
  74#define MVNETA_PHY_ADDR                         0x2000
  75#define      MVNETA_PHY_ADDR_MASK               0x1f
  76#define MVNETA_SMI                              0x2004
  77#define      MVNETA_PHY_REG_MASK                0x1f
  78/* SMI register fields */
  79#define     MVNETA_SMI_DATA_OFFS                0       /* Data */
  80#define     MVNETA_SMI_DATA_MASK                (0xffff << MVNETA_SMI_DATA_OFFS)
  81#define     MVNETA_SMI_DEV_ADDR_OFFS            16      /* PHY device address */
  82#define     MVNETA_SMI_REG_ADDR_OFFS            21      /* PHY device reg addr*/
  83#define     MVNETA_SMI_OPCODE_OFFS              26      /* Write/Read opcode */
  84#define     MVNETA_SMI_OPCODE_READ              (1 << MVNETA_SMI_OPCODE_OFFS)
  85#define     MVNETA_SMI_READ_VALID               (1 << 27)       /* Read Valid */
  86#define     MVNETA_SMI_BUSY                     (1 << 28)       /* Busy */
  87#define MVNETA_MBUS_RETRY                       0x2010
  88#define MVNETA_UNIT_INTR_CAUSE                  0x2080
  89#define MVNETA_UNIT_CONTROL                     0x20B0
  90#define      MVNETA_PHY_POLLING_ENABLE          BIT(1)
  91#define MVNETA_WIN_BASE(w)                      (0x2200 + ((w) << 3))
  92#define MVNETA_WIN_SIZE(w)                      (0x2204 + ((w) << 3))
  93#define MVNETA_WIN_REMAP(w)                     (0x2280 + ((w) << 2))
  94#define MVNETA_WIN_SIZE_MASK                    (0xffff0000)
  95#define MVNETA_BASE_ADDR_ENABLE                 0x2290
  96#define      MVNETA_BASE_ADDR_ENABLE_BIT        0x1
  97#define MVNETA_PORT_ACCESS_PROTECT              0x2294
  98#define      MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3
  99#define MVNETA_PORT_CONFIG                      0x2400
 100#define      MVNETA_UNI_PROMISC_MODE            BIT(0)
 101#define      MVNETA_DEF_RXQ(q)                  ((q) << 1)
 102#define      MVNETA_DEF_RXQ_ARP(q)              ((q) << 4)
 103#define      MVNETA_TX_UNSET_ERR_SUM            BIT(12)
 104#define      MVNETA_DEF_RXQ_TCP(q)              ((q) << 16)
 105#define      MVNETA_DEF_RXQ_UDP(q)              ((q) << 19)
 106#define      MVNETA_DEF_RXQ_BPDU(q)             ((q) << 22)
 107#define      MVNETA_RX_CSUM_WITH_PSEUDO_HDR     BIT(25)
 108#define      MVNETA_PORT_CONFIG_DEFL_VALUE(q)   (MVNETA_DEF_RXQ(q)       | \
 109                                                 MVNETA_DEF_RXQ_ARP(q)   | \
 110                                                 MVNETA_DEF_RXQ_TCP(q)   | \
 111                                                 MVNETA_DEF_RXQ_UDP(q)   | \
 112                                                 MVNETA_DEF_RXQ_BPDU(q)  | \
 113                                                 MVNETA_TX_UNSET_ERR_SUM | \
 114                                                 MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
 115#define MVNETA_PORT_CONFIG_EXTEND                0x2404
 116#define MVNETA_MAC_ADDR_LOW                      0x2414
 117#define MVNETA_MAC_ADDR_HIGH                     0x2418
 118#define MVNETA_SDMA_CONFIG                       0x241c
 119#define      MVNETA_SDMA_BRST_SIZE_16            4
 120#define      MVNETA_RX_BRST_SZ_MASK(burst)       ((burst) << 1)
 121#define      MVNETA_RX_NO_DATA_SWAP              BIT(4)
 122#define      MVNETA_TX_NO_DATA_SWAP              BIT(5)
 123#define      MVNETA_DESC_SWAP                    BIT(6)
 124#define      MVNETA_TX_BRST_SZ_MASK(burst)       ((burst) << 22)
 125#define MVNETA_PORT_STATUS                       0x2444
 126#define      MVNETA_TX_IN_PRGRS                  BIT(1)
 127#define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 128#define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
 129#define MVNETA_SERDES_CFG                        0x24A0
 130#define      MVNETA_SGMII_SERDES_PROTO           0x0cc7
 131#define      MVNETA_QSGMII_SERDES_PROTO          0x0667
 132#define MVNETA_TYPE_PRIO                         0x24bc
 133#define      MVNETA_FORCE_UNI                    BIT(21)
 134#define MVNETA_TXQ_CMD_1                         0x24e4
 135#define MVNETA_TXQ_CMD                           0x2448
 136#define      MVNETA_TXQ_DISABLE_SHIFT            8
 137#define      MVNETA_TXQ_ENABLE_MASK              0x000000ff
 138#define MVNETA_ACC_MODE                          0x2500
 139#define MVNETA_CPU_MAP(cpu)                      (0x2540 + ((cpu) << 2))
 140#define      MVNETA_CPU_RXQ_ACCESS_ALL_MASK      0x000000ff
 141#define      MVNETA_CPU_TXQ_ACCESS_ALL_MASK      0x0000ff00
 142#define MVNETA_RXQ_TIME_COAL_REG(q)              (0x2580 + ((q) << 2))
 143
 144/* Exception Interrupt Port/Queue Cause register */
 145
 146#define MVNETA_INTR_NEW_CAUSE                    0x25a0
 147#define MVNETA_INTR_NEW_MASK                     0x25a4
 148
 149/* bits  0..7  = TXQ SENT, one bit per queue.
 150 * bits  8..15 = RXQ OCCUP, one bit per queue.
 151 * bits 16..23 = RXQ FREE, one bit per queue.
 152 * bit  29 = OLD_REG_SUM, see old reg ?
 153 * bit  30 = TX_ERR_SUM, one bit for 4 ports
 154 * bit  31 = MISC_SUM,   one bit for 4 ports
 155 */
 156#define      MVNETA_TX_INTR_MASK(nr_txqs)        (((1 << nr_txqs) - 1) << 0)
 157#define      MVNETA_TX_INTR_MASK_ALL             (0xff << 0)
 158#define      MVNETA_RX_INTR_MASK(nr_rxqs)        (((1 << nr_rxqs) - 1) << 8)
 159#define      MVNETA_RX_INTR_MASK_ALL             (0xff << 8)
 160
 161#define MVNETA_INTR_OLD_CAUSE                    0x25a8
 162#define MVNETA_INTR_OLD_MASK                     0x25ac
 163
 164/* Data Path Port/Queue Cause Register */
 165#define MVNETA_INTR_MISC_CAUSE                   0x25b0
 166#define MVNETA_INTR_MISC_MASK                    0x25b4
 167#define MVNETA_INTR_ENABLE                       0x25b8
 168
 169#define MVNETA_RXQ_CMD                           0x2680
 170#define      MVNETA_RXQ_DISABLE_SHIFT            8
 171#define      MVNETA_RXQ_ENABLE_MASK              0x000000ff
 172#define MVETH_TXQ_TOKEN_COUNT_REG(q)             (0x2700 + ((q) << 4))
 173#define MVETH_TXQ_TOKEN_CFG_REG(q)               (0x2704 + ((q) << 4))
 174#define MVNETA_GMAC_CTRL_0                       0x2c00
 175#define      MVNETA_GMAC_MAX_RX_SIZE_SHIFT       2
 176#define      MVNETA_GMAC_MAX_RX_SIZE_MASK        0x7ffc
 177#define      MVNETA_GMAC0_PORT_ENABLE            BIT(0)
 178#define MVNETA_GMAC_CTRL_2                       0x2c08
 179#define      MVNETA_GMAC2_PCS_ENABLE             BIT(3)
 180#define      MVNETA_GMAC2_PORT_RGMII             BIT(4)
 181#define      MVNETA_GMAC2_PORT_RESET             BIT(6)
 182#define MVNETA_GMAC_STATUS                       0x2c10
 183#define      MVNETA_GMAC_LINK_UP                 BIT(0)
 184#define      MVNETA_GMAC_SPEED_1000              BIT(1)
 185#define      MVNETA_GMAC_SPEED_100               BIT(2)
 186#define      MVNETA_GMAC_FULL_DUPLEX             BIT(3)
 187#define      MVNETA_GMAC_RX_FLOW_CTRL_ENABLE     BIT(4)
 188#define      MVNETA_GMAC_TX_FLOW_CTRL_ENABLE     BIT(5)
 189#define      MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE     BIT(6)
 190#define      MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE     BIT(7)
 191#define MVNETA_GMAC_AUTONEG_CONFIG               0x2c0c
 192#define      MVNETA_GMAC_FORCE_LINK_DOWN         BIT(0)
 193#define      MVNETA_GMAC_FORCE_LINK_PASS         BIT(1)
 194#define      MVNETA_GMAC_FORCE_LINK_UP           (BIT(0) | BIT(1))
 195#define      MVNETA_GMAC_IB_BYPASS_AN_EN         BIT(3)
 196#define      MVNETA_GMAC_CONFIG_MII_SPEED        BIT(5)
 197#define      MVNETA_GMAC_CONFIG_GMII_SPEED       BIT(6)
 198#define      MVNETA_GMAC_AN_SPEED_EN             BIT(7)
 199#define      MVNETA_GMAC_SET_FC_EN               BIT(8)
 200#define      MVNETA_GMAC_ADVERT_FC_EN            BIT(9)
 201#define      MVNETA_GMAC_CONFIG_FULL_DUPLEX      BIT(12)
 202#define      MVNETA_GMAC_AN_DUPLEX_EN            BIT(13)
 203#define      MVNETA_GMAC_SAMPLE_TX_CFG_EN        BIT(15)
 204#define MVNETA_MIB_COUNTERS_BASE                 0x3080
 205#define      MVNETA_MIB_LATE_COLLISION           0x7c
 206#define MVNETA_DA_FILT_SPEC_MCAST                0x3400
 207#define MVNETA_DA_FILT_OTH_MCAST                 0x3500
 208#define MVNETA_DA_FILT_UCAST_BASE                0x3600
 209#define MVNETA_TXQ_BASE_ADDR_REG(q)              (0x3c00 + ((q) << 2))
 210#define MVNETA_TXQ_SIZE_REG(q)                   (0x3c20 + ((q) << 2))
 211#define      MVNETA_TXQ_SENT_THRESH_ALL_MASK     0x3fff0000
 212#define      MVNETA_TXQ_SENT_THRESH_MASK(coal)   ((coal) << 16)
 213#define MVNETA_TXQ_UPDATE_REG(q)                 (0x3c60 + ((q) << 2))
 214#define      MVNETA_TXQ_DEC_SENT_SHIFT           16
 215#define MVNETA_TXQ_STATUS_REG(q)                 (0x3c40 + ((q) << 2))
 216#define      MVNETA_TXQ_SENT_DESC_SHIFT          16
 217#define      MVNETA_TXQ_SENT_DESC_MASK           0x3fff0000
 218#define MVNETA_PORT_TX_RESET                     0x3cf0
 219#define      MVNETA_PORT_TX_DMA_RESET            BIT(0)
 220#define MVNETA_TX_MTU                            0x3e0c
 221#define MVNETA_TX_TOKEN_SIZE                     0x3e14
 222#define      MVNETA_TX_TOKEN_SIZE_MAX            0xffffffff
 223#define MVNETA_TXQ_TOKEN_SIZE_REG(q)             (0x3e40 + ((q) << 2))
 224#define      MVNETA_TXQ_TOKEN_SIZE_MAX           0x7fffffff
 225
 226/* Descriptor ring Macros */
 227#define MVNETA_QUEUE_NEXT_DESC(q, index)        \
 228        (((index) < (q)->last_desc) ? ((index) + 1) : 0)
 229
 230/* Various constants */
 231
 232/* Coalescing */
 233#define MVNETA_TXDONE_COAL_PKTS         16
 234#define MVNETA_RX_COAL_PKTS             32
 235#define MVNETA_RX_COAL_USEC             100
 236
 237/* The two bytes Marvell header. Either contains a special value used
 238 * by Marvell switches when a specific hardware mode is enabled (not
 239 * supported by this driver) or is filled automatically by zeroes on
 240 * the RX side. Those two bytes being at the front of the Ethernet
 241 * header, they allow to have the IP header aligned on a 4 bytes
 242 * boundary automatically: the hardware skips those two bytes on its
 243 * own.
 244 */
 245#define MVNETA_MH_SIZE                  2
 246
 247#define MVNETA_VLAN_TAG_LEN             4
 248
 249#define MVNETA_CPU_D_CACHE_LINE_SIZE    32
 250#define MVNETA_TX_CSUM_MAX_SIZE         9800
 251#define MVNETA_ACC_MODE_EXT             1
 252
 253/* Timeout constants */
 254#define MVNETA_TX_DISABLE_TIMEOUT_MSEC  1000
 255#define MVNETA_RX_DISABLE_TIMEOUT_MSEC  1000
 256#define MVNETA_TX_FIFO_EMPTY_TIMEOUT    10000
 257
 258#define MVNETA_TX_MTU_MAX               0x3ffff
 259
 260/* Max number of Rx descriptors */
 261#define MVNETA_MAX_RXD 16
 262
 263/* Max number of Tx descriptors */
 264#define MVNETA_MAX_TXD 16
 265
 266/* descriptor aligned size */
 267#define MVNETA_DESC_ALIGNED_SIZE        32
 268
 269struct mvneta_port {
 270        void __iomem *base;
 271        struct mvneta_rx_queue *rxqs;
 272        struct mvneta_tx_queue *txqs;
 273
 274        u8 mcast_count[256];
 275        u16 tx_ring_size;
 276        u16 rx_ring_size;
 277
 278        phy_interface_t phy_interface;
 279        unsigned int link;
 280        unsigned int duplex;
 281        unsigned int speed;
 282
 283        int init;
 284        int phyaddr;
 285        struct phy_device *phydev;
 286        struct mii_dev *bus;
 287};
 288
 289/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
 290 * layout of the transmit and reception DMA descriptors, and their
 291 * layout is therefore defined by the hardware design
 292 */
 293
 294#define MVNETA_TX_L3_OFF_SHIFT  0
 295#define MVNETA_TX_IP_HLEN_SHIFT 8
 296#define MVNETA_TX_L4_UDP        BIT(16)
 297#define MVNETA_TX_L3_IP6        BIT(17)
 298#define MVNETA_TXD_IP_CSUM      BIT(18)
 299#define MVNETA_TXD_Z_PAD        BIT(19)
 300#define MVNETA_TXD_L_DESC       BIT(20)
 301#define MVNETA_TXD_F_DESC       BIT(21)
 302#define MVNETA_TXD_FLZ_DESC     (MVNETA_TXD_Z_PAD  | \
 303                                 MVNETA_TXD_L_DESC | \
 304                                 MVNETA_TXD_F_DESC)
 305#define MVNETA_TX_L4_CSUM_FULL  BIT(30)
 306#define MVNETA_TX_L4_CSUM_NOT   BIT(31)
 307
 308#define MVNETA_RXD_ERR_CRC              0x0
 309#define MVNETA_RXD_ERR_SUMMARY          BIT(16)
 310#define MVNETA_RXD_ERR_OVERRUN          BIT(17)
 311#define MVNETA_RXD_ERR_LEN              BIT(18)
 312#define MVNETA_RXD_ERR_RESOURCE         (BIT(17) | BIT(18))
 313#define MVNETA_RXD_ERR_CODE_MASK        (BIT(17) | BIT(18))
 314#define MVNETA_RXD_L3_IP4               BIT(25)
 315#define MVNETA_RXD_FIRST_LAST_DESC      (BIT(26) | BIT(27))
 316#define MVNETA_RXD_L4_CSUM_OK           BIT(30)
 317
 318struct mvneta_tx_desc {
 319        u32  command;           /* Options used by HW for packet transmitting.*/
 320        u16  reserverd1;        /* csum_l4 (for future use)             */
 321        u16  data_size;         /* Data size of transmitted packet in bytes */
 322        u32  buf_phys_addr;     /* Physical addr of transmitted buffer  */
 323        u32  reserved2;         /* hw_cmd - (for future use, PMT)       */
 324        u32  reserved3[4];      /* Reserved - (for future use)          */
 325};
 326
 327struct mvneta_rx_desc {
 328        u32  status;            /* Info about received packet           */
 329        u16  reserved1;         /* pnc_info - (for future use, PnC)     */
 330        u16  data_size;         /* Size of received packet in bytes     */
 331
 332        u32  buf_phys_addr;     /* Physical address of the buffer       */
 333        u32  reserved2;         /* pnc_flow_id  (for future use, PnC)   */
 334
 335        u32  buf_cookie;        /* cookie for access to RX buffer in rx path */
 336        u16  reserved3;         /* prefetch_cmd, for future use         */
 337        u16  reserved4;         /* csum_l4 - (for future use, PnC)      */
 338
 339        u32  reserved5;         /* pnc_extra PnC (for future use, PnC)  */
 340        u32  reserved6;         /* hw_cmd (for future use, PnC and HWF) */
 341};
 342
 343struct mvneta_tx_queue {
 344        /* Number of this TX queue, in the range 0-7 */
 345        u8 id;
 346
 347        /* Number of TX DMA descriptors in the descriptor ring */
 348        int size;
 349
 350        /* Index of last TX DMA descriptor that was inserted */
 351        int txq_put_index;
 352
 353        /* Index of the TX DMA descriptor to be cleaned up */
 354        int txq_get_index;
 355
 356        /* Virtual address of the TX DMA descriptors array */
 357        struct mvneta_tx_desc *descs;
 358
 359        /* DMA address of the TX DMA descriptors array */
 360        dma_addr_t descs_phys;
 361
 362        /* Index of the last TX DMA descriptor */
 363        int last_desc;
 364
 365        /* Index of the next TX DMA descriptor to process */
 366        int next_desc_to_proc;
 367};
 368
 369struct mvneta_rx_queue {
 370        /* rx queue number, in the range 0-7 */
 371        u8 id;
 372
 373        /* num of rx descriptors in the rx descriptor ring */
 374        int size;
 375
 376        /* Virtual address of the RX DMA descriptors array */
 377        struct mvneta_rx_desc *descs;
 378
 379        /* DMA address of the RX DMA descriptors array */
 380        dma_addr_t descs_phys;
 381
 382        /* Index of the last RX DMA descriptor */
 383        int last_desc;
 384
 385        /* Index of the next RX DMA descriptor to process */
 386        int next_desc_to_proc;
 387};
 388
 389/* U-Boot doesn't use the queues, so set the number to 1 */
 390static int rxq_number = 1;
 391static int txq_number = 1;
 392static int rxq_def;
 393
 394struct buffer_location {
 395        struct mvneta_tx_desc *tx_descs;
 396        struct mvneta_rx_desc *rx_descs;
 397        u32 rx_buffers;
 398};
 399
 400/*
 401 * All 4 interfaces use the same global buffer, since only one interface
 402 * can be enabled at once
 403 */
 404static struct buffer_location buffer_loc;
 405
 406/*
 407 * Page table entries are set to 1MB, or multiples of 1MB
 408 * (not < 1MB). driver uses less bd's so use 1MB bdspace.
 409 */
 410#define BD_SPACE        (1 << 20)
 411
 412/*
 413 * Dummy implementation that can be overwritten by a board
 414 * specific function
 415 */
 416__weak int board_network_enable(struct mii_dev *bus)
 417{
 418        return 0;
 419}
 420
 421/* Utility/helper methods */
 422
 423/* Write helper method */
 424static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
 425{
 426        writel(data, pp->base + offset);
 427}
 428
 429/* Read helper method */
 430static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
 431{
 432        return readl(pp->base + offset);
 433}
 434
 435/* Clear all MIB counters */
 436static void mvneta_mib_counters_clear(struct mvneta_port *pp)
 437{
 438        int i;
 439
 440        /* Perform dummy reads from MIB counters */
 441        for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
 442                mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
 443}
 444
 445/* Rx descriptors helper methods */
 446
 447/* Checks whether the RX descriptor having this status is both the first
 448 * and the last descriptor for the RX packet. Each RX packet is currently
 449 * received through a single RX descriptor, so not having each RX
 450 * descriptor with its first and last bits set is an error
 451 */
 452static int mvneta_rxq_desc_is_first_last(u32 status)
 453{
 454        return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
 455                MVNETA_RXD_FIRST_LAST_DESC;
 456}
 457
 458/* Add number of descriptors ready to receive new packets */
 459static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
 460                                          struct mvneta_rx_queue *rxq,
 461                                          int ndescs)
 462{
 463        /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
 464         * be added at once
 465         */
 466        while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
 467                mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
 468                            (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
 469                             MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
 470                ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
 471        }
 472
 473        mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
 474                    (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
 475}
 476
 477/* Get number of RX descriptors occupied by received packets */
 478static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
 479                                        struct mvneta_rx_queue *rxq)
 480{
 481        u32 val;
 482
 483        val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
 484        return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
 485}
 486
 487/* Update num of rx desc called upon return from rx path or
 488 * from mvneta_rxq_drop_pkts().
 489 */
 490static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
 491                                       struct mvneta_rx_queue *rxq,
 492                                       int rx_done, int rx_filled)
 493{
 494        u32 val;
 495
 496        if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
 497                val = rx_done |
 498                  (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
 499                mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
 500                return;
 501        }
 502
 503        /* Only 255 descriptors can be added at once */
 504        while ((rx_done > 0) || (rx_filled > 0)) {
 505                if (rx_done <= 0xff) {
 506                        val = rx_done;
 507                        rx_done = 0;
 508                } else {
 509                        val = 0xff;
 510                        rx_done -= 0xff;
 511                }
 512                if (rx_filled <= 0xff) {
 513                        val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
 514                        rx_filled = 0;
 515                } else {
 516                        val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
 517                        rx_filled -= 0xff;
 518                }
 519                mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
 520        }
 521}
 522
 523/* Get pointer to next RX descriptor to be processed by SW */
 524static struct mvneta_rx_desc *
 525mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
 526{
 527        int rx_desc = rxq->next_desc_to_proc;
 528
 529        rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
 530        return rxq->descs + rx_desc;
 531}
 532
 533/* Tx descriptors helper methods */
 534
 535/* Update HW with number of TX descriptors to be sent */
 536static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
 537                                     struct mvneta_tx_queue *txq,
 538                                     int pend_desc)
 539{
 540        u32 val;
 541
 542        /* Only 255 descriptors can be added at once ; Assume caller
 543         * process TX desriptors in quanta less than 256
 544         */
 545        val = pend_desc;
 546        mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
 547}
 548
 549/* Get pointer to next TX descriptor to be processed (send) by HW */
 550static struct mvneta_tx_desc *
 551mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
 552{
 553        int tx_desc = txq->next_desc_to_proc;
 554
 555        txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
 556        return txq->descs + tx_desc;
 557}
 558
 559/* Set rxq buf size */
 560static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
 561                                    struct mvneta_rx_queue *rxq,
 562                                    int buf_size)
 563{
 564        u32 val;
 565
 566        val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
 567
 568        val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
 569        val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
 570
 571        mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
 572}
 573
 574static int mvneta_port_is_fixed_link(struct mvneta_port *pp)
 575{
 576        /* phy_addr is set to invalid value for fixed link */
 577        return pp->phyaddr > PHY_MAX_ADDR;
 578}
 579
 580
 581/* Start the Ethernet port RX and TX activity */
 582static void mvneta_port_up(struct mvneta_port *pp)
 583{
 584        int queue;
 585        u32 q_map;
 586
 587        /* Enable all initialized TXs. */
 588        mvneta_mib_counters_clear(pp);
 589        q_map = 0;
 590        for (queue = 0; queue < txq_number; queue++) {
 591                struct mvneta_tx_queue *txq = &pp->txqs[queue];
 592                if (txq->descs != NULL)
 593                        q_map |= (1 << queue);
 594        }
 595        mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
 596
 597        /* Enable all initialized RXQs. */
 598        q_map = 0;
 599        for (queue = 0; queue < rxq_number; queue++) {
 600                struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
 601                if (rxq->descs != NULL)
 602                        q_map |= (1 << queue);
 603        }
 604        mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
 605}
 606
 607/* Stop the Ethernet port activity */
 608static void mvneta_port_down(struct mvneta_port *pp)
 609{
 610        u32 val;
 611        int count;
 612
 613        /* Stop Rx port activity. Check port Rx activity. */
 614        val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
 615
 616        /* Issue stop command for active channels only */
 617        if (val != 0)
 618                mvreg_write(pp, MVNETA_RXQ_CMD,
 619                            val << MVNETA_RXQ_DISABLE_SHIFT);
 620
 621        /* Wait for all Rx activity to terminate. */
 622        count = 0;
 623        do {
 624                if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
 625                        netdev_warn(pp->dev,
 626                                    "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
 627                                    val);
 628                        break;
 629                }
 630                mdelay(1);
 631
 632                val = mvreg_read(pp, MVNETA_RXQ_CMD);
 633        } while (val & 0xff);
 634
 635        /* Stop Tx port activity. Check port Tx activity. Issue stop
 636         * command for active channels only
 637         */
 638        val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
 639
 640        if (val != 0)
 641                mvreg_write(pp, MVNETA_TXQ_CMD,
 642                            (val << MVNETA_TXQ_DISABLE_SHIFT));
 643
 644        /* Wait for all Tx activity to terminate. */
 645        count = 0;
 646        do {
 647                if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
 648                        netdev_warn(pp->dev,
 649                                    "TIMEOUT for TX stopped status=0x%08x\n",
 650                                    val);
 651                        break;
 652                }
 653                mdelay(1);
 654
 655                /* Check TX Command reg that all Txqs are stopped */
 656                val = mvreg_read(pp, MVNETA_TXQ_CMD);
 657
 658        } while (val & 0xff);
 659
 660        /* Double check to verify that TX FIFO is empty */
 661        count = 0;
 662        do {
 663                if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
 664                        netdev_warn(pp->dev,
 665                                    "TX FIFO empty timeout status=0x08%x\n",
 666                                    val);
 667                        break;
 668                }
 669                mdelay(1);
 670
 671                val = mvreg_read(pp, MVNETA_PORT_STATUS);
 672        } while (!(val & MVNETA_TX_FIFO_EMPTY) &&
 673                 (val & MVNETA_TX_IN_PRGRS));
 674
 675        udelay(200);
 676}
 677
 678/* Enable the port by setting the port enable bit of the MAC control register */
 679static void mvneta_port_enable(struct mvneta_port *pp)
 680{
 681        u32 val;
 682
 683        /* Enable port */
 684        val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
 685        val |= MVNETA_GMAC0_PORT_ENABLE;
 686        mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
 687}
 688
 689/* Disable the port and wait for about 200 usec before retuning */
 690static void mvneta_port_disable(struct mvneta_port *pp)
 691{
 692        u32 val;
 693
 694        /* Reset the Enable bit in the Serial Control Register */
 695        val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
 696        val &= ~MVNETA_GMAC0_PORT_ENABLE;
 697        mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
 698
 699        udelay(200);
 700}
 701
 702/* Multicast tables methods */
 703
 704/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
 705static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
 706{
 707        int offset;
 708        u32 val;
 709
 710        if (queue == -1) {
 711                val = 0;
 712        } else {
 713                val = 0x1 | (queue << 1);
 714                val |= (val << 24) | (val << 16) | (val << 8);
 715        }
 716
 717        for (offset = 0; offset <= 0xc; offset += 4)
 718                mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
 719}
 720
 721/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
 722static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
 723{
 724        int offset;
 725        u32 val;
 726
 727        if (queue == -1) {
 728                val = 0;
 729        } else {
 730                val = 0x1 | (queue << 1);
 731                val |= (val << 24) | (val << 16) | (val << 8);
 732        }
 733
 734        for (offset = 0; offset <= 0xfc; offset += 4)
 735                mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
 736}
 737
 738/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
 739static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
 740{
 741        int offset;
 742        u32 val;
 743
 744        if (queue == -1) {
 745                memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
 746                val = 0;
 747        } else {
 748                memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
 749                val = 0x1 | (queue << 1);
 750                val |= (val << 24) | (val << 16) | (val << 8);
 751        }
 752
 753        for (offset = 0; offset <= 0xfc; offset += 4)
 754                mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
 755}
 756
 757/* This method sets defaults to the NETA port:
 758 *      Clears interrupt Cause and Mask registers.
 759 *      Clears all MAC tables.
 760 *      Sets defaults to all registers.
 761 *      Resets RX and TX descriptor rings.
 762 *      Resets PHY.
 763 * This method can be called after mvneta_port_down() to return the port
 764 *      settings to defaults.
 765 */
 766static void mvneta_defaults_set(struct mvneta_port *pp)
 767{
 768        int cpu;
 769        int queue;
 770        u32 val;
 771
 772        /* Clear all Cause registers */
 773        mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
 774        mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
 775        mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
 776
 777        /* Mask all interrupts */
 778        mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
 779        mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
 780        mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
 781        mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
 782
 783        /* Enable MBUS Retry bit16 */
 784        mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
 785
 786        /* Set CPU queue access map - all CPUs have access to all RX
 787         * queues and to all TX queues
 788         */
 789        for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
 790                mvreg_write(pp, MVNETA_CPU_MAP(cpu),
 791                            (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
 792                             MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
 793
 794        /* Reset RX and TX DMAs */
 795        mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
 796        mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
 797
 798        /* Disable Legacy WRR, Disable EJP, Release from reset */
 799        mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
 800        for (queue = 0; queue < txq_number; queue++) {
 801                mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
 802                mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
 803        }
 804
 805        mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
 806        mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
 807
 808        /* Set Port Acceleration Mode */
 809        val = MVNETA_ACC_MODE_EXT;
 810        mvreg_write(pp, MVNETA_ACC_MODE, val);
 811
 812        /* Update val of portCfg register accordingly with all RxQueue types */
 813        val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
 814        mvreg_write(pp, MVNETA_PORT_CONFIG, val);
 815
 816        val = 0;
 817        mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
 818        mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
 819
 820        /* Build PORT_SDMA_CONFIG_REG */
 821        val = 0;
 822
 823        /* Default burst size */
 824        val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
 825        val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
 826        val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
 827
 828        /* Assign port SDMA configuration */
 829        mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
 830
 831        /* Enable PHY polling in hardware if not in fixed-link mode */
 832        if (!mvneta_port_is_fixed_link(pp)) {
 833                val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
 834                val |= MVNETA_PHY_POLLING_ENABLE;
 835                mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
 836        }
 837
 838        mvneta_set_ucast_table(pp, -1);
 839        mvneta_set_special_mcast_table(pp, -1);
 840        mvneta_set_other_mcast_table(pp, -1);
 841}
 842
 843/* Set unicast address */
 844static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
 845                                  int queue)
 846{
 847        unsigned int unicast_reg;
 848        unsigned int tbl_offset;
 849        unsigned int reg_offset;
 850
 851        /* Locate the Unicast table entry */
 852        last_nibble = (0xf & last_nibble);
 853
 854        /* offset from unicast tbl base */
 855        tbl_offset = (last_nibble / 4) * 4;
 856
 857        /* offset within the above reg  */
 858        reg_offset = last_nibble % 4;
 859
 860        unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
 861
 862        if (queue == -1) {
 863                /* Clear accepts frame bit at specified unicast DA tbl entry */
 864                unicast_reg &= ~(0xff << (8 * reg_offset));
 865        } else {
 866                unicast_reg &= ~(0xff << (8 * reg_offset));
 867                unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
 868        }
 869
 870        mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
 871}
 872
 873/* Set mac address */
 874static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
 875                                int queue)
 876{
 877        unsigned int mac_h;
 878        unsigned int mac_l;
 879
 880        if (queue != -1) {
 881                mac_l = (addr[4] << 8) | (addr[5]);
 882                mac_h = (addr[0] << 24) | (addr[1] << 16) |
 883                        (addr[2] << 8) | (addr[3] << 0);
 884
 885                mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
 886                mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
 887        }
 888
 889        /* Accept frames of this address */
 890        mvneta_set_ucast_addr(pp, addr[5], queue);
 891}
 892
 893/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
 894static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
 895                                u32 phys_addr, u32 cookie)
 896{
 897        rx_desc->buf_cookie = cookie;
 898        rx_desc->buf_phys_addr = phys_addr;
 899}
 900
 901/* Decrement sent descriptors counter */
 902static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
 903                                     struct mvneta_tx_queue *txq,
 904                                     int sent_desc)
 905{
 906        u32 val;
 907
 908        /* Only 255 TX descriptors can be updated at once */
 909        while (sent_desc > 0xff) {
 910                val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
 911                mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
 912                sent_desc = sent_desc - 0xff;
 913        }
 914
 915        val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
 916        mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
 917}
 918
 919/* Get number of TX descriptors already sent by HW */
 920static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
 921                                        struct mvneta_tx_queue *txq)
 922{
 923        u32 val;
 924        int sent_desc;
 925
 926        val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
 927        sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
 928                MVNETA_TXQ_SENT_DESC_SHIFT;
 929
 930        return sent_desc;
 931}
 932
 933/* Display more error info */
 934static void mvneta_rx_error(struct mvneta_port *pp,
 935                            struct mvneta_rx_desc *rx_desc)
 936{
 937        u32 status = rx_desc->status;
 938
 939        if (!mvneta_rxq_desc_is_first_last(status)) {
 940                netdev_err(pp->dev,
 941                           "bad rx status %08x (buffer oversize), size=%d\n",
 942                           status, rx_desc->data_size);
 943                return;
 944        }
 945
 946        switch (status & MVNETA_RXD_ERR_CODE_MASK) {
 947        case MVNETA_RXD_ERR_CRC:
 948                netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
 949                           status, rx_desc->data_size);
 950                break;
 951        case MVNETA_RXD_ERR_OVERRUN:
 952                netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
 953                           status, rx_desc->data_size);
 954                break;
 955        case MVNETA_RXD_ERR_LEN:
 956                netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
 957                           status, rx_desc->data_size);
 958                break;
 959        case MVNETA_RXD_ERR_RESOURCE:
 960                netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
 961                           status, rx_desc->data_size);
 962                break;
 963        }
 964}
 965
 966static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
 967                                                     int rxq)
 968{
 969        return &pp->rxqs[rxq];
 970}
 971
 972
 973/* Drop packets received by the RXQ and free buffers */
 974static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
 975                                 struct mvneta_rx_queue *rxq)
 976{
 977        int rx_done;
 978
 979        rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
 980        if (rx_done)
 981                mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
 982}
 983
 984/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
 985static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 986                           int num)
 987{
 988        int i;
 989
 990        for (i = 0; i < num; i++) {
 991                u32 addr;
 992
 993                /* U-Boot special: Fill in the rx buffer addresses */
 994                addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
 995                mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
 996        }
 997
 998        /* Add this number of RX descriptors as non occupied (ready to
 999         * get packets)
1000         */
1001        mvneta_rxq_non_occup_desc_add(pp, rxq, i);
1002
1003        return 0;
1004}
1005
1006/* Rx/Tx queue initialization/cleanup methods */
1007
1008/* Create a specified RX queue */
1009static int mvneta_rxq_init(struct mvneta_port *pp,
1010                           struct mvneta_rx_queue *rxq)
1011
1012{
1013        rxq->size = pp->rx_ring_size;
1014
1015        /* Allocate memory for RX descriptors */
1016        rxq->descs_phys = (dma_addr_t)rxq->descs;
1017        if (rxq->descs == NULL)
1018                return -ENOMEM;
1019
1020        rxq->last_desc = rxq->size - 1;
1021
1022        /* Set Rx descriptors queue starting address */
1023        mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
1024        mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
1025
1026        /* Fill RXQ with buffers from RX pool */
1027        mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
1028        mvneta_rxq_fill(pp, rxq, rxq->size);
1029
1030        return 0;
1031}
1032
1033/* Cleanup Rx queue */
1034static void mvneta_rxq_deinit(struct mvneta_port *pp,
1035                              struct mvneta_rx_queue *rxq)
1036{
1037        mvneta_rxq_drop_pkts(pp, rxq);
1038
1039        rxq->descs             = NULL;
1040        rxq->last_desc         = 0;
1041        rxq->next_desc_to_proc = 0;
1042        rxq->descs_phys        = 0;
1043}
1044
1045/* Create and initialize a tx queue */
1046static int mvneta_txq_init(struct mvneta_port *pp,
1047                           struct mvneta_tx_queue *txq)
1048{
1049        txq->size = pp->tx_ring_size;
1050
1051        /* Allocate memory for TX descriptors */
1052        txq->descs_phys = (dma_addr_t)txq->descs;
1053        if (txq->descs == NULL)
1054                return -ENOMEM;
1055
1056        txq->last_desc = txq->size - 1;
1057
1058        /* Set maximum bandwidth for enabled TXQs */
1059        mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
1060        mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
1061
1062        /* Set Tx descriptors queue starting address */
1063        mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
1064        mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
1065
1066        return 0;
1067}
1068
1069/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
1070static void mvneta_txq_deinit(struct mvneta_port *pp,
1071                              struct mvneta_tx_queue *txq)
1072{
1073        txq->descs             = NULL;
1074        txq->last_desc         = 0;
1075        txq->next_desc_to_proc = 0;
1076        txq->descs_phys        = 0;
1077
1078        /* Set minimum bandwidth for disabled TXQs */
1079        mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
1080        mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
1081
1082        /* Set Tx descriptors queue starting address and size */
1083        mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
1084        mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
1085}
1086
1087/* Cleanup all Tx queues */
1088static void mvneta_cleanup_txqs(struct mvneta_port *pp)
1089{
1090        int queue;
1091
1092        for (queue = 0; queue < txq_number; queue++)
1093                mvneta_txq_deinit(pp, &pp->txqs[queue]);
1094}
1095
1096/* Cleanup all Rx queues */
1097static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
1098{
1099        int queue;
1100
1101        for (queue = 0; queue < rxq_number; queue++)
1102                mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
1103}
1104
1105
1106/* Init all Rx queues */
1107static int mvneta_setup_rxqs(struct mvneta_port *pp)
1108{
1109        int queue;
1110
1111        for (queue = 0; queue < rxq_number; queue++) {
1112                int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
1113                if (err) {
1114                        netdev_err(pp->dev, "%s: can't create rxq=%d\n",
1115                                   __func__, queue);
1116                        mvneta_cleanup_rxqs(pp);
1117                        return err;
1118                }
1119        }
1120
1121        return 0;
1122}
1123
1124/* Init all tx queues */
1125static int mvneta_setup_txqs(struct mvneta_port *pp)
1126{
1127        int queue;
1128
1129        for (queue = 0; queue < txq_number; queue++) {
1130                int err = mvneta_txq_init(pp, &pp->txqs[queue]);
1131                if (err) {
1132                        netdev_err(pp->dev, "%s: can't create txq=%d\n",
1133                                   __func__, queue);
1134                        mvneta_cleanup_txqs(pp);
1135                        return err;
1136                }
1137        }
1138
1139        return 0;
1140}
1141
1142static void mvneta_start_dev(struct mvneta_port *pp)
1143{
1144        /* start the Rx/Tx activity */
1145        mvneta_port_enable(pp);
1146}
1147
1148static void mvneta_adjust_link(struct udevice *dev)
1149{
1150        struct mvneta_port *pp = dev_get_priv(dev);
1151        struct phy_device *phydev = pp->phydev;
1152        int status_change = 0;
1153
1154        if (mvneta_port_is_fixed_link(pp)) {
1155                debug("Using fixed link, skip link adjust\n");
1156                return;
1157        }
1158
1159        if (phydev->link) {
1160                if ((pp->speed != phydev->speed) ||
1161                    (pp->duplex != phydev->duplex)) {
1162                        u32 val;
1163
1164                        val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1165                        val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
1166                                 MVNETA_GMAC_CONFIG_GMII_SPEED |
1167                                 MVNETA_GMAC_CONFIG_FULL_DUPLEX |
1168                                 MVNETA_GMAC_AN_SPEED_EN |
1169                                 MVNETA_GMAC_AN_DUPLEX_EN);
1170
1171                        if (phydev->duplex)
1172                                val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1173
1174                        if (phydev->speed == SPEED_1000)
1175                                val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1176                        else
1177                                val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1178
1179                        mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1180
1181                        pp->duplex = phydev->duplex;
1182                        pp->speed  = phydev->speed;
1183                }
1184        }
1185
1186        if (phydev->link != pp->link) {
1187                if (!phydev->link) {
1188                        pp->duplex = -1;
1189                        pp->speed = 0;
1190                }
1191
1192                pp->link = phydev->link;
1193                status_change = 1;
1194        }
1195
1196        if (status_change) {
1197                if (phydev->link) {
1198                        u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1199                        val |= (MVNETA_GMAC_FORCE_LINK_PASS |
1200                                MVNETA_GMAC_FORCE_LINK_DOWN);
1201                        mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1202                        mvneta_port_up(pp);
1203                } else {
1204                        mvneta_port_down(pp);
1205                }
1206        }
1207}
1208
1209static int mvneta_open(struct udevice *dev)
1210{
1211        struct mvneta_port *pp = dev_get_priv(dev);
1212        int ret;
1213
1214        ret = mvneta_setup_rxqs(pp);
1215        if (ret)
1216                return ret;
1217
1218        ret = mvneta_setup_txqs(pp);
1219        if (ret)
1220                return ret;
1221
1222        mvneta_adjust_link(dev);
1223
1224        mvneta_start_dev(pp);
1225
1226        return 0;
1227}
1228
1229/* Initialize hw */
1230static int mvneta_init2(struct mvneta_port *pp)
1231{
1232        int queue;
1233
1234        /* Disable port */
1235        mvneta_port_disable(pp);
1236
1237        /* Set port default values */
1238        mvneta_defaults_set(pp);
1239
1240        pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
1241                           GFP_KERNEL);
1242        if (!pp->txqs)
1243                return -ENOMEM;
1244
1245        /* U-Boot special: use preallocated area */
1246        pp->txqs[0].descs = buffer_loc.tx_descs;
1247
1248        /* Initialize TX descriptor rings */
1249        for (queue = 0; queue < txq_number; queue++) {
1250                struct mvneta_tx_queue *txq = &pp->txqs[queue];
1251                txq->id = queue;
1252                txq->size = pp->tx_ring_size;
1253        }
1254
1255        pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
1256                           GFP_KERNEL);
1257        if (!pp->rxqs) {
1258                kfree(pp->txqs);
1259                return -ENOMEM;
1260        }
1261
1262        /* U-Boot special: use preallocated area */
1263        pp->rxqs[0].descs = buffer_loc.rx_descs;
1264
1265        /* Create Rx descriptor rings */
1266        for (queue = 0; queue < rxq_number; queue++) {
1267                struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
1268                rxq->id = queue;
1269                rxq->size = pp->rx_ring_size;
1270        }
1271
1272        return 0;
1273}
1274
1275/* platform glue : initialize decoding windows */
1276
1277/*
1278 * Not like A380, in Armada3700, there are two layers of decode windows for GBE:
1279 * First layer is:  GbE Address window that resides inside the GBE unit,
1280 * Second layer is: Fabric address window which is located in the NIC400
1281 *                  (South Fabric).
1282 * To simplify the address decode configuration for Armada3700, we bypass the
1283 * first layer of GBE decode window by setting the first window to 4GB.
1284 */
1285static void mvneta_bypass_mbus_windows(struct mvneta_port *pp)
1286{
1287        /*
1288         * Set window size to 4GB, to bypass GBE address decode, leave the
1289         * work to MBUS decode window
1290         */
1291        mvreg_write(pp, MVNETA_WIN_SIZE(0), MVNETA_WIN_SIZE_MASK);
1292
1293        /* Enable GBE address decode window 0 by set bit 0 to 0 */
1294        clrbits_le32(pp->base + MVNETA_BASE_ADDR_ENABLE,
1295                     MVNETA_BASE_ADDR_ENABLE_BIT);
1296
1297        /* Set GBE address decode window 0 to full Access (read or write) */
1298        setbits_le32(pp->base + MVNETA_PORT_ACCESS_PROTECT,
1299                     MVNETA_PORT_ACCESS_PROTECT_WIN0_RW);
1300}
1301
1302static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
1303{
1304        const struct mbus_dram_target_info *dram;
1305        u32 win_enable;
1306        u32 win_protect;
1307        int i;
1308
1309        dram = mvebu_mbus_dram_info();
1310        for (i = 0; i < 6; i++) {
1311                mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
1312                mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
1313
1314                if (i < 4)
1315                        mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
1316        }
1317
1318        win_enable = 0x3f;
1319        win_protect = 0;
1320
1321        for (i = 0; i < dram->num_cs; i++) {
1322                const struct mbus_dram_window *cs = dram->cs + i;
1323                mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
1324                            (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
1325
1326                mvreg_write(pp, MVNETA_WIN_SIZE(i),
1327                            (cs->size - 1) & 0xffff0000);
1328
1329                win_enable &= ~(1 << i);
1330                win_protect |= 3 << (2 * i);
1331        }
1332
1333        mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
1334}
1335
1336/* Power up the port */
1337static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
1338{
1339        u32 ctrl;
1340
1341        /* MAC Cause register should be cleared */
1342        mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
1343
1344        ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
1345
1346        /* Even though it might look weird, when we're configured in
1347         * SGMII or QSGMII mode, the RGMII bit needs to be set.
1348         */
1349        switch (phy_mode) {
1350        case PHY_INTERFACE_MODE_QSGMII:
1351                mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
1352                ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1353                break;
1354        case PHY_INTERFACE_MODE_SGMII:
1355                mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
1356                ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1357                break;
1358        case PHY_INTERFACE_MODE_RGMII:
1359        case PHY_INTERFACE_MODE_RGMII_ID:
1360                ctrl |= MVNETA_GMAC2_PORT_RGMII;
1361                break;
1362        default:
1363                return -EINVAL;
1364        }
1365
1366        /* Cancel Port Reset */
1367        ctrl &= ~MVNETA_GMAC2_PORT_RESET;
1368        mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
1369
1370        while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
1371                MVNETA_GMAC2_PORT_RESET) != 0)
1372                continue;
1373
1374        return 0;
1375}
1376
1377/* Device initialization routine */
1378static int mvneta_init(struct udevice *dev)
1379{
1380        struct eth_pdata *pdata = dev_get_platdata(dev);
1381        struct mvneta_port *pp = dev_get_priv(dev);
1382        int err;
1383
1384        pp->tx_ring_size = MVNETA_MAX_TXD;
1385        pp->rx_ring_size = MVNETA_MAX_RXD;
1386
1387        err = mvneta_init2(pp);
1388        if (err < 0) {
1389                dev_err(&pdev->dev, "can't init eth hal\n");
1390                return err;
1391        }
1392
1393        mvneta_mac_addr_set(pp, pdata->enetaddr, rxq_def);
1394
1395        err = mvneta_port_power_up(pp, pp->phy_interface);
1396        if (err < 0) {
1397                dev_err(&pdev->dev, "can't power up port\n");
1398                return err;
1399        }
1400
1401        /* Call open() now as it needs to be done before runing send() */
1402        mvneta_open(dev);
1403
1404        return 0;
1405}
1406
1407/* U-Boot only functions follow here */
1408
1409/* SMI / MDIO functions */
1410
1411static int smi_wait_ready(struct mvneta_port *pp)
1412{
1413        u32 timeout = MVNETA_SMI_TIMEOUT;
1414        u32 smi_reg;
1415
1416        /* wait till the SMI is not busy */
1417        do {
1418                /* read smi register */
1419                smi_reg = mvreg_read(pp, MVNETA_SMI);
1420                if (timeout-- == 0) {
1421                        printf("Error: SMI busy timeout\n");
1422                        return -EFAULT;
1423                }
1424        } while (smi_reg & MVNETA_SMI_BUSY);
1425
1426        return 0;
1427}
1428
1429/*
1430 * mvneta_mdio_read - miiphy_read callback function.
1431 *
1432 * Returns 16bit phy register value, or 0xffff on error
1433 */
1434static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
1435{
1436        struct mvneta_port *pp = bus->priv;
1437        u32 smi_reg;
1438        u32 timeout;
1439
1440        /* check parameters */
1441        if (addr > MVNETA_PHY_ADDR_MASK) {
1442                printf("Error: Invalid PHY address %d\n", addr);
1443                return -EFAULT;
1444        }
1445
1446        if (reg > MVNETA_PHY_REG_MASK) {
1447                printf("Err: Invalid register offset %d\n", reg);
1448                return -EFAULT;
1449        }
1450
1451        /* wait till the SMI is not busy */
1452        if (smi_wait_ready(pp) < 0)
1453                return -EFAULT;
1454
1455        /* fill the phy address and regiser offset and read opcode */
1456        smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS)
1457                | (reg << MVNETA_SMI_REG_ADDR_OFFS)
1458                | MVNETA_SMI_OPCODE_READ;
1459
1460        /* write the smi register */
1461        mvreg_write(pp, MVNETA_SMI, smi_reg);
1462
1463        /* wait till read value is ready */
1464        timeout = MVNETA_SMI_TIMEOUT;
1465
1466        do {
1467                /* read smi register */
1468                smi_reg = mvreg_read(pp, MVNETA_SMI);
1469                if (timeout-- == 0) {
1470                        printf("Err: SMI read ready timeout\n");
1471                        return -EFAULT;
1472                }
1473        } while (!(smi_reg & MVNETA_SMI_READ_VALID));
1474
1475        /* Wait for the data to update in the SMI register */
1476        for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
1477                ;
1478
1479        return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK;
1480}
1481
1482/*
1483 * mvneta_mdio_write - miiphy_write callback function.
1484 *
1485 * Returns 0 if write succeed, -EINVAL on bad parameters
1486 * -ETIME on timeout
1487 */
1488static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
1489                             u16 value)
1490{
1491        struct mvneta_port *pp = bus->priv;
1492        u32 smi_reg;
1493
1494        /* check parameters */
1495        if (addr > MVNETA_PHY_ADDR_MASK) {
1496                printf("Error: Invalid PHY address %d\n", addr);
1497                return -EFAULT;
1498        }
1499
1500        if (reg > MVNETA_PHY_REG_MASK) {
1501                printf("Err: Invalid register offset %d\n", reg);
1502                return -EFAULT;
1503        }
1504
1505        /* wait till the SMI is not busy */
1506        if (smi_wait_ready(pp) < 0)
1507                return -EFAULT;
1508
1509        /* fill the phy addr and reg offset and write opcode and data */
1510        smi_reg = value << MVNETA_SMI_DATA_OFFS;
1511        smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS)
1512                | (reg << MVNETA_SMI_REG_ADDR_OFFS);
1513        smi_reg &= ~MVNETA_SMI_OPCODE_READ;
1514
1515        /* write the smi register */
1516        mvreg_write(pp, MVNETA_SMI, smi_reg);
1517
1518        return 0;
1519}
1520
1521static int mvneta_start(struct udevice *dev)
1522{
1523        struct mvneta_port *pp = dev_get_priv(dev);
1524        struct phy_device *phydev;
1525
1526        mvneta_port_power_up(pp, pp->phy_interface);
1527
1528        if (!pp->init || pp->link == 0) {
1529                if (mvneta_port_is_fixed_link(pp)) {
1530                        u32 val;
1531
1532                        pp->init = 1;
1533                        pp->link = 1;
1534                        mvneta_init(dev);
1535
1536                        val = MVNETA_GMAC_FORCE_LINK_UP |
1537                              MVNETA_GMAC_IB_BYPASS_AN_EN |
1538                              MVNETA_GMAC_SET_FC_EN |
1539                              MVNETA_GMAC_ADVERT_FC_EN |
1540                              MVNETA_GMAC_SAMPLE_TX_CFG_EN;
1541
1542                        if (pp->duplex)
1543                                val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1544
1545                        if (pp->speed == SPEED_1000)
1546                                val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1547                        else if (pp->speed == SPEED_100)
1548                                val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1549
1550                        mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1551                } else {
1552                        /* Set phy address of the port */
1553                        mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
1554
1555                        phydev = phy_connect(pp->bus, pp->phyaddr, dev,
1556                                             pp->phy_interface);
1557
1558                        pp->phydev = phydev;
1559                        phy_config(phydev);
1560                        phy_startup(phydev);
1561                        if (!phydev->link) {
1562                                printf("%s: No link.\n", phydev->dev->name);
1563                                return -1;
1564                        }
1565
1566                        /* Full init on first call */
1567                        mvneta_init(dev);
1568                        pp->init = 1;
1569                        return 0;
1570                }
1571        }
1572
1573        /* Upon all following calls, this is enough */
1574        mvneta_port_up(pp);
1575        mvneta_port_enable(pp);
1576
1577        return 0;
1578}
1579
1580static int mvneta_send(struct udevice *dev, void *packet, int length)
1581{
1582        struct mvneta_port *pp = dev_get_priv(dev);
1583        struct mvneta_tx_queue *txq = &pp->txqs[0];
1584        struct mvneta_tx_desc *tx_desc;
1585        int sent_desc;
1586        u32 timeout = 0;
1587
1588        /* Get a descriptor for the first part of the packet */
1589        tx_desc = mvneta_txq_next_desc_get(txq);
1590
1591        tx_desc->buf_phys_addr = (u32)(uintptr_t)packet;
1592        tx_desc->data_size = length;
1593        flush_dcache_range((ulong)packet,
1594                           (ulong)packet + ALIGN(length, PKTALIGN));
1595
1596        /* First and Last descriptor */
1597        tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
1598        mvneta_txq_pend_desc_add(pp, txq, 1);
1599
1600        /* Wait for packet to be sent (queue might help with speed here) */
1601        sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1602        while (!sent_desc) {
1603                if (timeout++ > 10000) {
1604                        printf("timeout: packet not sent\n");
1605                        return -1;
1606                }
1607                sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1608        }
1609
1610        /* txDone has increased - hw sent packet */
1611        mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
1612
1613        return 0;
1614}
1615
1616static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
1617{
1618        struct mvneta_port *pp = dev_get_priv(dev);
1619        int rx_done;
1620        struct mvneta_rx_queue *rxq;
1621        int rx_bytes = 0;
1622
1623        /* get rx queue */
1624        rxq = mvneta_rxq_handle_get(pp, rxq_def);
1625        rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
1626
1627        if (rx_done) {
1628                struct mvneta_rx_desc *rx_desc;
1629                unsigned char *data;
1630                u32 rx_status;
1631
1632                /*
1633                 * No cache invalidation needed here, since the desc's are
1634                 * located in a uncached memory region
1635                 */
1636                rx_desc = mvneta_rxq_next_desc_get(rxq);
1637
1638                rx_status = rx_desc->status;
1639                if (!mvneta_rxq_desc_is_first_last(rx_status) ||
1640                    (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
1641                        mvneta_rx_error(pp, rx_desc);
1642                        /* leave the descriptor untouched */
1643                        return -EIO;
1644                }
1645
1646                /* 2 bytes for marvell header. 4 bytes for crc */
1647                rx_bytes = rx_desc->data_size - 6;
1648
1649                /* give packet to stack - skip on first 2 bytes */
1650                data = (u8 *)(uintptr_t)rx_desc->buf_cookie + 2;
1651                /*
1652                 * No cache invalidation needed here, since the rx_buffer's are
1653                 * located in a uncached memory region
1654                 */
1655                *packetp = data;
1656
1657                mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
1658        }
1659
1660        return rx_bytes;
1661}
1662
1663static int mvneta_probe(struct udevice *dev)
1664{
1665        struct eth_pdata *pdata = dev_get_platdata(dev);
1666        struct mvneta_port *pp = dev_get_priv(dev);
1667        void *blob = (void *)gd->fdt_blob;
1668        int node = dev_of_offset(dev);
1669        struct mii_dev *bus;
1670        unsigned long addr;
1671        void *bd_space;
1672        int ret;
1673        int fl_node;
1674
1675        /*
1676         * Allocate buffer area for descs and rx_buffers. This is only
1677         * done once for all interfaces. As only one interface can
1678         * be active. Make this area DMA safe by disabling the D-cache
1679         */
1680        if (!buffer_loc.tx_descs) {
1681                /* Align buffer area for descs and rx_buffers to 1MiB */
1682                bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
1683                mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE,
1684                                                DCACHE_OFF);
1685                buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
1686                buffer_loc.rx_descs = (struct mvneta_rx_desc *)
1687                        ((phys_addr_t)bd_space +
1688                         MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
1689                buffer_loc.rx_buffers = (phys_addr_t)
1690                        (bd_space +
1691                         MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
1692                         MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
1693        }
1694
1695        pp->base = (void __iomem *)pdata->iobase;
1696
1697        /* Configure MBUS address windows */
1698        if (device_is_compatible(dev, "marvell,armada-3700-neta"))
1699                mvneta_bypass_mbus_windows(pp);
1700        else
1701                mvneta_conf_mbus_windows(pp);
1702
1703        /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */
1704        pp->phy_interface = pdata->phy_interface;
1705
1706        /* fetch 'fixed-link' property from 'neta' node */
1707        fl_node = fdt_subnode_offset(blob, node, "fixed-link");
1708        if (fl_node != -FDT_ERR_NOTFOUND) {
1709                /* set phy_addr to invalid value for fixed link */
1710                pp->phyaddr = PHY_MAX_ADDR + 1;
1711                pp->duplex = fdtdec_get_bool(blob, fl_node, "full-duplex");
1712                pp->speed = fdtdec_get_int(blob, fl_node, "speed", 0);
1713        } else {
1714                /* Now read phyaddr from DT */
1715                addr = fdtdec_get_int(blob, node, "phy", 0);
1716                addr = fdt_node_offset_by_phandle(blob, addr);
1717                pp->phyaddr = fdtdec_get_int(blob, addr, "reg", 0);
1718        }
1719
1720        bus = mdio_alloc();
1721        if (!bus) {
1722                printf("Failed to allocate MDIO bus\n");
1723                return -ENOMEM;
1724        }
1725
1726        bus->read = mvneta_mdio_read;
1727        bus->write = mvneta_mdio_write;
1728        snprintf(bus->name, sizeof(bus->name), dev->name);
1729        bus->priv = (void *)pp;
1730        pp->bus = bus;
1731
1732        ret = mdio_register(bus);
1733        if (ret)
1734                return ret;
1735
1736        return board_network_enable(bus);
1737}
1738
1739static void mvneta_stop(struct udevice *dev)
1740{
1741        struct mvneta_port *pp = dev_get_priv(dev);
1742
1743        mvneta_port_down(pp);
1744        mvneta_port_disable(pp);
1745}
1746
1747static const struct eth_ops mvneta_ops = {
1748        .start          = mvneta_start,
1749        .send           = mvneta_send,
1750        .recv           = mvneta_recv,
1751        .stop           = mvneta_stop,
1752};
1753
1754static int mvneta_ofdata_to_platdata(struct udevice *dev)
1755{
1756        struct eth_pdata *pdata = dev_get_platdata(dev);
1757        const char *phy_mode;
1758
1759        pdata->iobase = devfdt_get_addr(dev);
1760
1761        /* Get phy-mode / phy_interface from DT */
1762        pdata->phy_interface = -1;
1763        phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
1764                               NULL);
1765        if (phy_mode)
1766                pdata->phy_interface = phy_get_interface_by_name(phy_mode);
1767        if (pdata->phy_interface == -1) {
1768                debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
1769                return -EINVAL;
1770        }
1771
1772        return 0;
1773}
1774
1775static const struct udevice_id mvneta_ids[] = {
1776        { .compatible = "marvell,armada-370-neta" },
1777        { .compatible = "marvell,armada-xp-neta" },
1778        { .compatible = "marvell,armada-3700-neta" },
1779        { }
1780};
1781
1782U_BOOT_DRIVER(mvneta) = {
1783        .name   = "mvneta",
1784        .id     = UCLASS_ETH,
1785        .of_match = mvneta_ids,
1786        .ofdata_to_platdata = mvneta_ofdata_to_platdata,
1787        .probe  = mvneta_probe,
1788        .ops    = &mvneta_ops,
1789        .priv_auto_alloc_size = sizeof(struct mvneta_port),
1790        .platdata_auto_alloc_size = sizeof(struct eth_pdata),
1791};
1792