LXR uboot/include/configs/dns325.h

   1/*
   2 * Copyright (C) 2011
   3 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
   4 *
   5 * Based on Kirkwood support:
   6 * (C) Copyright 2009
   7 * Marvell Semiconductor <www.marvell.com>
   8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   9 *
  10 * SPDX-License-Identifier:     GPL-2.0+
  11 */
  12
  13#ifndef _CONFIG_DNS325_H
  14#define _CONFIG_DNS325_H
  15
  16/*
  17 * Machine number definition
  18 */
  19#define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  20
  21/*
  22 * High Level Configuration Options (easy to change)
  23 */
  24#define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  25#define CONFIG_KW88F6281                /* SOC Name */
  26#define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28/*
  29 * Commands configuration
  30 */
  31#define CONFIG_CMD_NAND
  32#define CONFIG_SYS_MVFS
  33
  34#define CONFIG_NR_DRAM_BANKS            1
  35
  36/*
  37 * mv-common.h should be defined after CMD configs since it used them
  38 * to enable certain macros
  39 */
  40#include "mv-common.h"
  41
  42/* Remove or override few declarations from mv-common.h */
  43
  44/*
  45 * Ethernet Driver configuration
  46 */
  47#ifdef CONFIG_CMD_NET
  48#define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  49#define CONFIG_NETCONSOLE
  50#endif
  51
  52/*
  53 * SATA Driver configuration
  54 */
  55#ifdef CONFIG_MVSATA_IDE
  56#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  57#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  58#endif
  59
  60/*
  61 * RTC driver configuration
  62 */
  63#ifdef CONFIG_CMD_DATE
  64#define CONFIG_RTC_MV
  65#endif
  66
  67/*
  68 * Enable GPI0 support
  69 */
  70#define CONFIG_KIRKWOOD_GPIO
  71
  72/*
  73 * Environment variables configurations
  74 */
  75#ifdef CONFIG_CMD_NAND
  76#define CONFIG_ENV_IS_IN_NAND
  77#define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  78#else
  79#define CONFIG_ENV_IS_NOWHERE
  80#endif
  81
  82#define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  83#define CONFIG_ENV_ADDR                 0xe0000
  84#define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  85
  86/*
  87 * Default environment variables
  88 */
  89#define MTDIDS_DEFAULT                  "nand0=orion_nand"
  90
  91#define MTDPARTS_DEFAULT                "mtdparts=orion_nand:" \
  92        "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
  93
  94#define CONFIG_EXTRA_ENV_SETTINGS \
  95        "stdin=serial\0" \
  96        "stdout=serial\0" \
  97        "stderr=serial\0" \
  98        "loadaddr=0x800000\0" \
  99        "autoload=no\0" \
 100        "console=ttyS0,115200\0" \
 101        "mtdparts="MTDPARTS_DEFAULT \
 102        "optargs=\0" \
 103        "bootenv=uEnv.txt\0" \
 104        "importbootenv=echo Importing environment ...; " \
 105                "env import -t ${loadaddr} ${filesize}\0" \
 106        "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
 107        "setbootargs=setenv bootargs console=${console} " \
 108                "${optargs} " \
 109                "${mtdparts} " \
 110                "root=${bootenvroot} " \
 111                "rootfstype=${bootenvrootfstype}\0" \
 112        "subbootcmd=run setbootargs; " \
 113                "if run bootenvloadimage; then " \
 114                        "bootm ${loadaddr};" \
 115                "fi;\0" \
 116        "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 117        "nandrootfstype=ubifs\0" \
 118        "nandloadimage=nand read ${loadaddr} kernel\0" \
 119        "setnandbootenv=echo Booting from nand ...; " \
 120                "setenv bootenvroot ${nandroot}; " \
 121                "setenv bootenvrootfstype ${nandrootfstype}; " \
 122                "setenv bootenvloadimage ${nandloadimage}\0"
 123
 124#define CONFIG_BOOTCOMMAND \
 125        "if test -n ${bootenv} && usb start; then " \
 126                "if run loadbootenv; then " \
 127                        "echo Loaded environment ${bootenv} from usb;" \
 128                        "run importbootenv;" \
 129                "fi;" \
 130                "if test -n ${bootenvcmd}; then " \
 131                        "echo Running bootenvcmd ...;" \
 132                        "run bootenvcmd;" \
 133                "fi;" \
 134        "fi;" \
 135        "run setnandbootenv subbootcmd;"
 136
 137#endif /* _CONFIG_DNS325_H */
 138