uboot/drivers/ata/fsl_sata.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
   3 *              Dave Liu <daveliu@freescale.com>
   4 *
   5 * SPDX-License-Identifier:     GPL-2.0+
   6 */
   7
   8#include <common.h>
   9#include <command.h>
  10#include <console.h>
  11#include <asm/io.h>
  12#include <asm/processor.h>
  13#include <asm/fsl_serdes.h>
  14#include <malloc.h>
  15#include <libata.h>
  16#include <fis.h>
  17#include <sata.h>
  18#include "fsl_sata.h"
  19
  20#ifndef CONFIG_SYS_SATA1_FLAGS
  21        #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
  22#endif
  23#ifndef CONFIG_SYS_SATA2_FLAGS
  24        #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
  25#endif
  26
  27static struct fsl_sata_info fsl_sata_info[] = {
  28#ifdef CONFIG_SATA1
  29        {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
  30#else
  31        {0, 0},
  32#endif
  33#ifdef CONFIG_SATA2
  34        {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
  35#else
  36        {0, 0},
  37#endif
  38};
  39
  40static inline void sdelay(unsigned long sec)
  41{
  42        unsigned long i;
  43        for (i = 0; i < sec; i++)
  44                mdelay(1000);
  45}
  46
  47static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
  48{
  49        printf("Status FIS dump:\n\r");
  50        printf("fis_type:               %02x\n\r", s->fis_type);
  51        printf("pm_port_i:              %02x\n\r", s->pm_port_i);
  52        printf("status:                 %02x\n\r", s->status);
  53        printf("error:                  %02x\n\r", s->error);
  54        printf("lba_low:                %02x\n\r", s->lba_low);
  55        printf("lba_mid:                %02x\n\r", s->lba_mid);
  56        printf("lba_high:               %02x\n\r", s->lba_high);
  57        printf("device:                 %02x\n\r", s->device);
  58        printf("lba_low_exp:            %02x\n\r", s->lba_low_exp);
  59        printf("lba_mid_exp:            %02x\n\r", s->lba_mid_exp);
  60        printf("lba_high_exp:           %02x\n\r", s->lba_high_exp);
  61        printf("res1:                   %02x\n\r", s->res1);
  62        printf("sector_count:           %02x\n\r", s->sector_count);
  63        printf("sector_count_exp:       %02x\n\r", s->sector_count_exp);
  64}
  65
  66static int ata_wait_register(unsigned __iomem *addr, u32 mask,
  67                         u32 val, u32 timeout_msec)
  68{
  69        int i;
  70        u32 temp;
  71
  72        for (i = 0; (((temp = in_le32(addr)) & mask) != val)
  73                         && i < timeout_msec; i++)
  74                mdelay(1);
  75        return (i < timeout_msec) ? 0 : -1;
  76}
  77
  78int init_sata(int dev)
  79{
  80        u32 length, align;
  81        cmd_hdr_tbl_t *cmd_hdr;
  82        u32 cda;
  83        u32 val32;
  84        fsl_sata_reg_t __iomem *reg;
  85        u32 sig;
  86        int i;
  87        fsl_sata_t *sata;
  88
  89        if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
  90                printf("the sata index %d is out of ranges\n\r", dev);
  91                return -1;
  92        }
  93
  94#ifdef CONFIG_MPC85xx
  95        if ((dev == 0) && (!is_serdes_configured(SATA1))) {
  96                printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
  97                return -1;
  98        }
  99        if ((dev == 1) && (!is_serdes_configured(SATA2))) {
 100                printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
 101                return -1;
 102        }
 103#endif
 104
 105        /* Allocate SATA device driver struct */
 106        sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
 107        if (!sata) {
 108                printf("alloc the sata device struct failed\n\r");
 109                return -1;
 110        }
 111        /* Zero all of the device driver struct */
 112        memset((void *)sata, 0, sizeof(fsl_sata_t));
 113
 114        /* Save the private struct to block device struct */
 115        sata_dev_desc[dev].priv = (void *)sata;
 116
 117        snprintf(sata->name, 12, "SATA%d", dev);
 118
 119        /* Set the controller register base address to device struct */
 120        reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
 121        sata->reg_base = reg;
 122
 123        /* Allocate the command header table, 4 bytes aligned */
 124        length = sizeof(struct cmd_hdr_tbl);
 125        align = SATA_HC_CMD_HDR_TBL_ALIGN;
 126        sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
 127        if (!sata->cmd_hdr_tbl_offset) {
 128                printf("alloc the command header failed\n\r");
 129                return -1;
 130        }
 131
 132        cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
 133                                                & ~(align - 1));
 134        sata->cmd_hdr = cmd_hdr;
 135
 136        /* Zero all of the command header table */
 137        memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
 138
 139        /* Allocate command descriptor for all command */
 140        length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
 141        align = SATA_HC_CMD_DESC_ALIGN;
 142        sata->cmd_desc_offset = (void *)malloc(length + align);
 143        if (!sata->cmd_desc_offset) {
 144                printf("alloc the command descriptor failed\n\r");
 145                return -1;
 146        }
 147        sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
 148                                                & ~(align - 1));
 149        /* Zero all of command descriptor */
 150        memset((void *)sata->cmd_desc_offset, 0, length + align);
 151
 152        /* Link the command descriptor to command header */
 153        for (i = 0; i < SATA_HC_MAX_CMD; i++) {
 154                cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
 155                                         & ~(CMD_HDR_CDA_ALIGN - 1);
 156                cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
 157        }
 158
 159        /* To have safe state, force the controller offline */
 160        val32 = in_le32(&reg->hcontrol);
 161        val32 &= ~HCONTROL_ONOFF;
 162        val32 |= HCONTROL_FORCE_OFFLINE;
 163        out_le32(&reg->hcontrol, val32);
 164
 165        /* Wait the controller offline */
 166        ata_wait_register(&reg->hstatus, HSTATUS_ONOFF, 0, 1000);
 167
 168        /* Set the command header base address to CHBA register to tell DMA */
 169        out_le32(&reg->chba, (u32)cmd_hdr & ~0x3);
 170
 171        /* Snoop for the command header */
 172        val32 = in_le32(&reg->hcontrol);
 173        val32 |= HCONTROL_HDR_SNOOP;
 174        out_le32(&reg->hcontrol, val32);
 175
 176        /* Disable all of interrupts */
 177        val32 = in_le32(&reg->hcontrol);
 178        val32 &= ~HCONTROL_INT_EN_ALL;
 179        out_le32(&reg->hcontrol, val32);
 180
 181        /* Clear all of interrupts */
 182        val32 = in_le32(&reg->hstatus);
 183        out_le32(&reg->hstatus, val32);
 184
 185        /* Set the ICC, no interrupt coalescing */
 186        out_le32(&reg->icc, 0x01000000);
 187
 188        /* No PM attatched, the SATA device direct connect */
 189        out_le32(&reg->cqpmp, 0);
 190
 191        /* Clear SError register */
 192        val32 = in_le32(&reg->serror);
 193        out_le32(&reg->serror, val32);
 194
 195        /* Clear CER register */
 196        val32 = in_le32(&reg->cer);
 197        out_le32(&reg->cer, val32);
 198
 199        /* Clear DER register */
 200        val32 = in_le32(&reg->der);
 201        out_le32(&reg->der, val32);
 202
 203        /* No device detection or initialization action requested */
 204        out_le32(&reg->scontrol, 0x00000300);
 205
 206        /* Configure the transport layer, default value */
 207        out_le32(&reg->transcfg, 0x08000016);
 208
 209        /* Configure the link layer, default value */
 210        out_le32(&reg->linkcfg, 0x0000ff34);
 211
 212        /* Bring the controller online */
 213        val32 = in_le32(&reg->hcontrol);
 214        val32 |= HCONTROL_ONOFF;
 215        out_le32(&reg->hcontrol, val32);
 216
 217        mdelay(100);
 218
 219        /* print sata device name */
 220        if (!dev)
 221                printf("%s ", sata->name);
 222        else
 223                printf("       %s ", sata->name);
 224
 225        /* Wait PHY RDY signal changed for 500ms */
 226        ata_wait_register(&reg->hstatus, HSTATUS_PHY_RDY,
 227                          HSTATUS_PHY_RDY, 500);
 228
 229        /* Check PHYRDY */
 230        val32 = in_le32(&reg->hstatus);
 231        if (val32 & HSTATUS_PHY_RDY) {
 232                sata->link = 1;
 233        } else {
 234                sata->link = 0;
 235                printf("(No RDY)\n\r");
 236                return -1;
 237        }
 238
 239        /* Wait for signature updated, which is 1st D2H */
 240        ata_wait_register(&reg->hstatus, HSTATUS_SIGNATURE,
 241                          HSTATUS_SIGNATURE, 10000);
 242
 243        if (val32 & HSTATUS_SIGNATURE) {
 244                sig = in_le32(&reg->sig);
 245                debug("Signature updated, the sig =%08x\n\r", sig);
 246                sata->ata_device_type = ata_dev_classify(sig);
 247        }
 248
 249        /* Check the speed */
 250        val32 = in_le32(&reg->sstatus);
 251        if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
 252                printf("(1.5 Gbps)\n\r");
 253        else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
 254                printf("(3 Gbps)\n\r");
 255
 256        return 0;
 257}
 258
 259int reset_sata(int dev)
 260{
 261        return 0;
 262}
 263
 264static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
 265{
 266        printf("\n\rSATA:           %08x\n\r", (u32)reg);
 267        printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
 268        printf("CAR:            %08x\n\r", in_le32(&reg->car));
 269        printf("CCR:            %08x\n\r", in_le32(&reg->ccr));
 270        printf("CER:            %08x\n\r", in_le32(&reg->cer));
 271        printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
 272        printf("DER:            %08x\n\r", in_le32(&reg->der));
 273        printf("CHBA:           %08x\n\r", in_le32(&reg->chba));
 274        printf("HStatus:        %08x\n\r", in_le32(&reg->hstatus));
 275        printf("HControl:       %08x\n\r", in_le32(&reg->hcontrol));
 276        printf("CQPMP:          %08x\n\r", in_le32(&reg->cqpmp));
 277        printf("SIG:            %08x\n\r", in_le32(&reg->sig));
 278        printf("ICC:            %08x\n\r", in_le32(&reg->icc));
 279        printf("SStatus:        %08x\n\r", in_le32(&reg->sstatus));
 280        printf("SError:         %08x\n\r", in_le32(&reg->serror));
 281        printf("SControl:       %08x\n\r", in_le32(&reg->scontrol));
 282        printf("SNotification:  %08x\n\r", in_le32(&reg->snotification));
 283        printf("TransCfg:       %08x\n\r", in_le32(&reg->transcfg));
 284        printf("TransStatus:    %08x\n\r", in_le32(&reg->transstatus));
 285        printf("LinkCfg:        %08x\n\r", in_le32(&reg->linkcfg));
 286        printf("LinkCfg1:       %08x\n\r", in_le32(&reg->linkcfg1));
 287        printf("LinkCfg2:       %08x\n\r", in_le32(&reg->linkcfg2));
 288        printf("LinkStatus:     %08x\n\r", in_le32(&reg->linkstatus));
 289        printf("LinkStatus1:    %08x\n\r", in_le32(&reg->linkstatus1));
 290        printf("PhyCtrlCfg:     %08x\n\r", in_le32(&reg->phyctrlcfg));
 291        printf("SYSPR:          %08x\n\r", in_be32(&reg->syspr));
 292}
 293
 294static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 295                                int is_ncq, int tag, u8 *buffer, u32 len)
 296{
 297        cmd_hdr_entry_t *cmd_hdr;
 298        cmd_desc_t *cmd_desc;
 299        sata_fis_h2d_t *h2d;
 300        prd_entry_t *prde;
 301        u32 ext_c_ddc;
 302        u32 prde_count;
 303        u32 val32;
 304        u32 ttl;
 305        fsl_sata_reg_t __iomem *reg = sata->reg_base;
 306        int i;
 307
 308        /* Check xfer length */
 309        if (len > SATA_HC_MAX_XFER_LEN) {
 310                printf("max transfer length is 64MB\n\r");
 311                return 0;
 312        }
 313
 314        /* Setup the command descriptor */
 315        cmd_desc = sata->cmd_desc + tag;
 316
 317        /* Get the pointer cfis of command descriptor */
 318        h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
 319
 320        /* Zero the cfis of command descriptor */
 321        memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
 322
 323        /* Copy the cfis from user to command descriptor */
 324        h2d->fis_type = cfis->fis_type;
 325        h2d->pm_port_c = cfis->pm_port_c;
 326        h2d->command = cfis->command;
 327
 328        h2d->features = cfis->features;
 329        h2d->features_exp = cfis->features_exp;
 330
 331        h2d->lba_low = cfis->lba_low;
 332        h2d->lba_mid = cfis->lba_mid;
 333        h2d->lba_high = cfis->lba_high;
 334        h2d->lba_low_exp = cfis->lba_low_exp;
 335        h2d->lba_mid_exp = cfis->lba_mid_exp;
 336        h2d->lba_high_exp = cfis->lba_high_exp;
 337
 338        if (!is_ncq) {
 339                h2d->sector_count = cfis->sector_count;
 340                h2d->sector_count_exp = cfis->sector_count_exp;
 341        } else { /* NCQ */
 342                h2d->sector_count = (u8)(tag << 3);
 343        }
 344
 345        h2d->device = cfis->device;
 346        h2d->control = cfis->control;
 347
 348        /* Setup the PRD table */
 349        prde = (prd_entry_t *)cmd_desc->prdt;
 350        memset((void *)prde, 0, sizeof(struct prdt));
 351
 352        prde_count = 0;
 353        ttl = len;
 354        for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
 355                if (!len)
 356                        break;
 357                prde->dba = cpu_to_le32((u32)buffer & ~0x3);
 358                debug("dba = %08x\n\r", (u32)buffer);
 359
 360                if (len < PRD_ENTRY_MAX_XFER_SZ) {
 361                        ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
 362                        debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
 363                        prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
 364                        prde_count++;
 365                        prde++;
 366                        break;
 367                } else {
 368                        ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
 369                        debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
 370                        prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
 371                        buffer += PRD_ENTRY_MAX_XFER_SZ;
 372                        len -= PRD_ENTRY_MAX_XFER_SZ;
 373                        prde_count++;
 374                        prde++;
 375                }
 376        }
 377
 378        /* Setup the command slot of cmd hdr */
 379        cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
 380
 381        cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
 382
 383        val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
 384        val32 |= sizeof(sata_fis_h2d_t);
 385        cmd_hdr->prde_fis_len = cpu_to_le32(val32);
 386
 387        cmd_hdr->ttl = cpu_to_le32(ttl);
 388
 389        if (!is_ncq) {
 390                val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
 391        } else {
 392                val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
 393        }
 394
 395        tag &= CMD_HDR_ATTR_TAG;
 396        val32 |= tag;
 397
 398        debug("attribute = %08x\n\r", val32);
 399        cmd_hdr->attribute = cpu_to_le32(val32);
 400
 401        /* Make sure cmd desc and cmd slot valid before command issue */
 402        sync();
 403
 404        /* PMP*/
 405        val32 = (u32)(h2d->pm_port_c & 0x0f);
 406        out_le32(&reg->cqpmp, val32);
 407
 408        /* Wait no active */
 409        if (ata_wait_register(&reg->car, (1 << tag), 0, 10000))
 410                printf("Wait no active time out\n\r");
 411
 412        /* Issue command */
 413        if (!(in_le32(&reg->cqr) & (1 << tag))) {
 414                val32 = 1 << tag;
 415                out_le32(&reg->cqr, val32);
 416        }
 417
 418        /* Wait command completed for 10s */
 419        if (ata_wait_register(&reg->ccr, (1 << tag), (1 << tag), 10000)) {
 420                if (!is_ncq)
 421                        printf("Non-NCQ command time out\n\r");
 422                else
 423                        printf("NCQ command time out\n\r");
 424        }
 425
 426        val32 = in_le32(&reg->cer);
 427
 428        if (val32) {
 429                u32 der;
 430                fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
 431                printf("CE at device\n\r");
 432                fsl_sata_dump_regs(reg);
 433                der = in_le32(&reg->der);
 434                out_le32(&reg->cer, val32);
 435                out_le32(&reg->der, der);
 436        }
 437
 438        /* Clear complete flags */
 439        val32 = in_le32(&reg->ccr);
 440        out_le32(&reg->ccr, val32);
 441
 442        return len;
 443}
 444
 445static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 446                                 int tag, u8 *buffer, u32 len)
 447{
 448        return 0;
 449}
 450
 451static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
 452                 enum cmd_type command_type, int tag, u8 *buffer, u32 len)
 453{
 454        int rc;
 455
 456        if (tag > SATA_HC_MAX_CMD || tag < 0) {
 457                printf("tag is out of range, tag=%d\n\r", tag);
 458                return -1;
 459        }
 460
 461        switch (command_type) {
 462        case CMD_ATA:
 463                rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
 464                return rc;
 465        case CMD_RESET:
 466                rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
 467                return rc;
 468        case CMD_NCQ:
 469                rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
 470                return rc;
 471        case CMD_ATAPI:
 472        case CMD_VENDOR_BIST:
 473        case CMD_BIST:
 474                printf("not support now\n\r");
 475                return -1;
 476        default:
 477                break;
 478        }
 479
 480        return -1;
 481}
 482
 483static void fsl_sata_identify(int dev, u16 *id)
 484{
 485        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 486        struct sata_fis_h2d h2d, *cfis = &h2d;
 487
 488        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 489
 490        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 491        cfis->pm_port_c = 0x80; /* is command */
 492        cfis->command = ATA_CMD_ID_ATA;
 493
 494        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
 495        ata_swap_buf_le16(id, ATA_ID_WORDS);
 496}
 497
 498static void fsl_sata_xfer_mode(int dev, u16 *id)
 499{
 500        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 501
 502        sata->pio = id[ATA_ID_PIO_MODES];
 503        sata->mwdma = id[ATA_ID_MWDMA_MODES];
 504        sata->udma = id[ATA_ID_UDMA_MODES];
 505        debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
 506}
 507
 508static void fsl_sata_set_features(int dev)
 509{
 510        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 511        struct sata_fis_h2d h2d, *cfis = &h2d;
 512        u8 udma_cap;
 513
 514        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 515
 516        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 517        cfis->pm_port_c = 0x80; /* is command */
 518        cfis->command = ATA_CMD_SET_FEATURES;
 519        cfis->features = SETFEATURES_XFER;
 520
 521        /* First check the device capablity */
 522        udma_cap = (u8)(sata->udma & 0xff);
 523        debug("udma_cap %02x\n\r", udma_cap);
 524
 525        if (udma_cap == ATA_UDMA6)
 526                cfis->sector_count = XFER_UDMA_6;
 527        if (udma_cap == ATA_UDMA5)
 528                cfis->sector_count = XFER_UDMA_5;
 529        if (udma_cap == ATA_UDMA4)
 530                cfis->sector_count = XFER_UDMA_4;
 531        if (udma_cap == ATA_UDMA3)
 532                cfis->sector_count = XFER_UDMA_3;
 533
 534        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 535}
 536
 537static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
 538{
 539        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 540        struct sata_fis_h2d h2d, *cfis = &h2d;
 541        u32 block;
 542
 543        block = start;
 544
 545        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 546
 547        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 548        cfis->pm_port_c = 0x80; /* is command */
 549        cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
 550        cfis->device = ATA_LBA;
 551
 552        cfis->device |= (block >> 24) & 0xf;
 553        cfis->lba_high = (block >> 16) & 0xff;
 554        cfis->lba_mid = (block >> 8) & 0xff;
 555        cfis->lba_low = block & 0xff;
 556        cfis->sector_count = (u8)(blkcnt & 0xff);
 557
 558        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
 559        return blkcnt;
 560}
 561
 562static void fsl_sata_flush_cache(int dev)
 563{
 564        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 565        struct sata_fis_h2d h2d, *cfis = &h2d;
 566
 567        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 568
 569        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 570        cfis->pm_port_c = 0x80; /* is command */
 571        cfis->command = ATA_CMD_FLUSH;
 572
 573        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 574}
 575
 576static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
 577{
 578        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 579        struct sata_fis_h2d h2d, *cfis = &h2d;
 580        u64 block;
 581
 582        block = (u64)start;
 583
 584        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 585
 586        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 587        cfis->pm_port_c = 0x80; /* is command */
 588
 589        cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
 590                                 : ATA_CMD_READ_EXT;
 591
 592        cfis->lba_high_exp = (block >> 40) & 0xff;
 593        cfis->lba_mid_exp = (block >> 32) & 0xff;
 594        cfis->lba_low_exp = (block >> 24) & 0xff;
 595        cfis->lba_high = (block >> 16) & 0xff;
 596        cfis->lba_mid = (block >> 8) & 0xff;
 597        cfis->lba_low = block & 0xff;
 598        cfis->device = ATA_LBA;
 599        cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
 600        cfis->sector_count = blkcnt & 0xff;
 601
 602        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
 603        return blkcnt;
 604}
 605
 606static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
 607                               int is_write)
 608{
 609        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 610        struct sata_fis_h2d h2d, *cfis = &h2d;
 611        int ncq_channel;
 612        u64 block;
 613
 614        if (sata->lba48 != 1) {
 615                printf("execute FPDMA command on non-LBA48 hard disk\n\r");
 616                return -1;
 617        }
 618
 619        block = (u64)start;
 620
 621        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 622
 623        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 624        cfis->pm_port_c = 0x80; /* is command */
 625
 626        cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
 627                                 : ATA_CMD_FPDMA_READ;
 628
 629        cfis->lba_high_exp = (block >> 40) & 0xff;
 630        cfis->lba_mid_exp = (block >> 32) & 0xff;
 631        cfis->lba_low_exp = (block >> 24) & 0xff;
 632        cfis->lba_high = (block >> 16) & 0xff;
 633        cfis->lba_mid = (block >> 8) & 0xff;
 634        cfis->lba_low = block & 0xff;
 635
 636        cfis->device = ATA_LBA;
 637        cfis->features_exp = (blkcnt >> 8) & 0xff;
 638        cfis->features = blkcnt & 0xff;
 639
 640        if (sata->queue_depth >= SATA_HC_MAX_CMD)
 641                ncq_channel = SATA_HC_MAX_CMD - 1;
 642        else
 643                ncq_channel = sata->queue_depth - 1;
 644
 645        /* Use the latest queue */
 646        fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
 647        return blkcnt;
 648}
 649
 650static void fsl_sata_flush_cache_ext(int dev)
 651{
 652        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 653        struct sata_fis_h2d h2d, *cfis = &h2d;
 654
 655        memset(cfis, 0, sizeof(struct sata_fis_h2d));
 656
 657        cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
 658        cfis->pm_port_c = 0x80; /* is command */
 659        cfis->command = ATA_CMD_FLUSH_EXT;
 660
 661        fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 662}
 663
 664static void fsl_sata_init_wcache(int dev, u16 *id)
 665{
 666        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 667
 668        if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
 669                sata->wcache = 1;
 670        if (ata_id_has_flush(id))
 671                sata->flush = 1;
 672        if (ata_id_has_flush_ext(id))
 673                sata->flush_ext = 1;
 674}
 675
 676static int fsl_sata_get_wcache(int dev)
 677{
 678        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 679        return sata->wcache;
 680}
 681
 682static int fsl_sata_get_flush(int dev)
 683{
 684        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 685        return sata->flush;
 686}
 687
 688static int fsl_sata_get_flush_ext(int dev)
 689{
 690        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 691        return sata->flush_ext;
 692}
 693
 694static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
 695                const void *buffer, int is_write)
 696{
 697        u32 start, blks;
 698        u8 *addr;
 699        int max_blks;
 700
 701        start = blknr;
 702        blks = blkcnt;
 703        addr = (u8 *)buffer;
 704
 705        max_blks = ATA_MAX_SECTORS_LBA48;
 706        do {
 707                if (blks > max_blks) {
 708                        if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
 709                                fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
 710                        else
 711                                fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
 712                        start += max_blks;
 713                        blks -= max_blks;
 714                        addr += ATA_SECT_SIZE * max_blks;
 715                } else {
 716                        if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
 717                                fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
 718                        else
 719                                fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
 720                        start += blks;
 721                        blks = 0;
 722                        addr += ATA_SECT_SIZE * blks;
 723                }
 724        } while (blks != 0);
 725
 726        return blkcnt;
 727}
 728
 729static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
 730                                  const void *buffer, int is_write)
 731{
 732        u32 start, blks;
 733        u8 *addr;
 734        int max_blks;
 735
 736        start = blknr;
 737        blks = blkcnt;
 738        addr = (u8 *)buffer;
 739
 740        max_blks = ATA_MAX_SECTORS;
 741        do {
 742                if (blks > max_blks) {
 743                        fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
 744                        start += max_blks;
 745                        blks -= max_blks;
 746                        addr += ATA_SECT_SIZE * max_blks;
 747                } else {
 748                        fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
 749                        start += blks;
 750                        blks = 0;
 751                        addr += ATA_SECT_SIZE * blks;
 752                }
 753        } while (blks != 0);
 754
 755        return blkcnt;
 756}
 757
 758/*
 759 * SATA interface between low level driver and command layer
 760 */
 761ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
 762{
 763        u32 rc;
 764        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 765
 766        if (sata->lba48)
 767                rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
 768        else
 769                rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
 770        return rc;
 771}
 772
 773ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
 774{
 775        u32 rc;
 776        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 777
 778        if (sata->lba48) {
 779                rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
 780                if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
 781                        fsl_sata_flush_cache_ext(dev);
 782        } else {
 783                rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
 784                if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
 785                        fsl_sata_flush_cache(dev);
 786        }
 787        return rc;
 788}
 789
 790int scan_sata(int dev)
 791{
 792        fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 793        unsigned char serial[ATA_ID_SERNO_LEN + 1];
 794        unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
 795        unsigned char product[ATA_ID_PROD_LEN + 1];
 796        u16 *id;
 797        u64 n_sectors;
 798
 799        /* if no detected link */
 800        if (!sata->link)
 801                return -1;
 802
 803        id = (u16 *)malloc(ATA_ID_WORDS * 2);
 804        if (!id) {
 805                printf("id malloc failed\n\r");
 806                return -1;
 807        }
 808
 809        /* Identify device to get information */
 810        fsl_sata_identify(dev, id);
 811
 812        /* Serial number */
 813        ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
 814        memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
 815
 816        /* Firmware version */
 817        ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
 818        memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
 819
 820        /* Product model */
 821        ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
 822        memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
 823
 824        /* Totoal sectors */
 825        n_sectors = ata_id_n_sectors(id);
 826        sata_dev_desc[dev].lba = (u32)n_sectors;
 827
 828#ifdef CONFIG_LBA48
 829        /* Check if support LBA48 */
 830        if (ata_id_has_lba48(id)) {
 831                sata->lba48 = 1;
 832                debug("Device support LBA48\n\r");
 833        } else
 834                debug("Device supports LBA28\n\r");
 835#endif
 836
 837        /* Get the NCQ queue depth from device */
 838        sata->queue_depth = ata_id_queue_depth(id);
 839
 840        /* Get the xfer mode from device */
 841        fsl_sata_xfer_mode(dev, id);
 842
 843        /* Get the write cache status from device */
 844        fsl_sata_init_wcache(dev, id);
 845
 846        /* Set the xfer mode to highest speed */
 847        fsl_sata_set_features(dev);
 848#ifdef DEBUG
 849        fsl_sata_identify(dev, id);
 850        ata_dump_id(id);
 851#endif
 852        free((void *)id);
 853        return 0;
 854}
 855