1
2
3
4
5
6
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#include <config_distro_defaults.h>
12#include "mx6_common.h"
13
14#define CONFIG_SPL_LIBCOMMON_SUPPORT
15#include "imx6_spl.h"
16
17#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
18#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
19#define CONFIG_SPL_OS_BOOT
20#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000)
21#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000)
22#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K)
23#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
24
25
26
27
28
29
30#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
31#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
32#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
33#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
34#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb"
35
36
37#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
38
39#define CONFIG_BOARD_EARLY_INIT_F
40#define CONFIG_BOARD_LATE_INIT
41
42#define CONFIG_MXC_UART
43#define CONFIG_MXC_UART_BASE UART1_BASE
44
45#define CONFIG_SYS_MEMTEST_START 0x10000000
46#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
47
48#define CONFIG_MXC_SPI
49#define CONFIG_SF_DEFAULT_BUS 2
50#define CONFIG_SF_DEFAULT_CS 0
51#define CONFIG_SF_DEFAULT_SPEED 25000000
52#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
53
54
55#define CONFIG_SYS_I2C
56#define CONFIG_SYS_I2C_MXC
57#define CONFIG_SYS_I2C_MXC_I2C1
58#define CONFIG_SYS_I2C_MXC_I2C2
59#define CONFIG_SYS_I2C_SPEED 100000
60
61
62#define CONFIG_SYS_FSL_USDHC_NUM 2
63#define CONFIG_SYS_FSL_ESDHC_ADDR 0
64
65
66#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
67#define CONFIG_SYS_FLASH_PROTECTION
68#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
69#define CONFIG_SYS_FLASH_CFI
70#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
71#define CONFIG_SYS_FLASH_EMPTY_INFO
72#define CONFIG_FLASH_CFI_DRIVER
73#define CONFIG_FLASH_VERIFY
74
75
76#define CONFIG_FLASH_CFI_DRIVER
77#define CONFIG_FLASH_CFI_MTD
78#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
79#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
80#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
81
82
83#define CONFIG_MTD_DEVICE
84#define CONFIG_MTD_PARTITIONS
85
86#define MTDIDS_DEFAULT "nor0=8000000.nor"
87#define MTDPARTS_DEFAULT \
88 "mtdparts=8000000.nor:" \
89 "32m@0x0(mccmon6-image.nor)," \
90 "256k@0x40000(u-boot-env.nor)," \
91 "1m@0x80000(u-boot.nor)," \
92 "8m@0x180000(kernel.nor)," \
93 "8m@0x980000(swupdate-kernel.nor)," \
94 "8m@0x1180000(swupdate-rootfs.nor)," \
95 "128k@0x1980000(kernel-dtb.nor)," \
96 "128k@0x19C0000(swupdate-kernel-dtb.nor)"
97
98
99#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
100#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
101#define CONFIG_MXC_USB_FLAGS 0
102
103
104#define CONFIG_FEC_MXC
105#define CONFIG_MII
106#define IMX_FEC_BASE ENET_BASE_ADDR
107#define CONFIG_FEC_XCV_TYPE RGMII
108#define CONFIG_ETHPRIME "FEC"
109#define CONFIG_FEC_MXC_PHYADDR 1
110
111#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
112#define CONFIG_EXTRA_ENV_SETTINGS \
113 "console=ttymxc0,115200 quiet\0" \
114 "fdtfile=imx6q-mccmon6.dtb\0" \
115 "fdt_high=0xffffffff\0" \
116 "initrd_high=0xffffffff\0" \
117 "boot_os=yes\0" \
118 "download_kernel=" \
119 "tftpboot ${kernel_addr} ${kernel_file};" \
120 "tftpboot ${fdt_addr} ${fdtfile};\0" \
121 "get_boot_medium=" \
122 "setenv boot_medium nor;" \
123 "setexpr.l _src_sbmr1 *0x020d8004;" \
124 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
125 "if test ${_b_medium} = 40; then " \
126 "setenv boot_medium sdcard;" \
127 "fi\0" \
128 "kernel_file=uImage\0" \
129 "load_kernel=" \
130 "load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \
131 "load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \
132 "boot_sd=" \
133 "echo '#######################';" \
134 "echo '# Factory SDcard Boot #';" \
135 "echo '#######################';" \
136 "setenv mmcdev 1;" \
137 "setenv mmcfactorydev 0;" \
138 "setenv mmcfactorypart 1;" \
139 "run factory_flash_img;\0" \
140 "boot_nor=" \
141 "setenv kernelnor 0x08180000;" \
142 "setenv dtbnor 0x09980000;" \
143 "setenv bootargs console=${console} " \
144 ""MTDPARTS_DEFAULT" " \
145 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
146 "cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \
147 "bootm ${kernelnor} - ${dtbloadaddr};\0" \
148 "boot_recovery=" \
149 "echo '#######################';" \
150 "echo '# RECOVERY SWU Boot #';" \
151 "echo '#######################';" \
152 "setenv rootfsloadaddr 0x13000000;" \
153 "setenv swukernelnor 0x08980000;" \
154 "setenv swurootfsnor 0x09180000;" \
155 "setenv swudtbnor 0x099A0000;" \
156 "setenv bootargs console=${console} " \
157 ""MTDPARTS_DEFAULT" " \
158 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
159 ":${hostname}::off root=/dev/ram rw;" \
160 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
161 "cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \
162 "bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \
163 "boot_tftp=" \
164 "echo '#######################';" \
165 "echo '# TFTP Boot #';" \
166 "echo '#######################';" \
167 "if run download_kernel; then " \
168 "setenv bootargs console=${console} " \
169 "root=/dev/mmcblk0p2 rootwait;" \
170 "bootm ${kernel_addr} - ${fdt_addr};" \
171 "fi\0" \
172 "bootcmd=" \
173 "if test -n ${recovery_status}; then " \
174 "run boot_recovery;" \
175 "else " \
176 "if test ! -n ${boot_medium}; then " \
177 "run get_boot_medium;" \
178 "if test ${boot_medium} = sdcard; then " \
179 "run boot_sd;" \
180 "else " \
181 "run boot_nor;" \
182 "fi;" \
183 "else " \
184 "if test ${boot_medium} = tftp; then " \
185 "run boot_tftp;" \
186 "fi;" \
187 "fi;" \
188 "fi\0" \
189 "mtdparts=" MTDPARTS_DEFAULT "\0" \
190 "fdt_addr=0x18000000\0" \
191 "bootdev=1\0" \
192 "bootpart=1\0" \
193 "kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \
194 "netdev=eth0\0" \
195 "load_addr=0x11000000\0" \
196 "dtbloadaddr=0x12000000\0" \
197 "uboot_file=u-boot.img\0" \
198 "SPL_file=SPL\0" \
199 "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
200 "nor_img_addr=0x11000000\0" \
201 "nor_img_file=core-image-lwn-mccmon6.nor\0" \
202 "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
203 "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
204 "nor_img_size=0x02000000\0" \
205 "factory_script_file=factory.scr\0" \
206 "factory_load_script=" \
207 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
208 "${factory_script_file}; then " \
209 "load mmc ${mmcdev}:${mmcfactorypart} " \
210 "${loadaddr} ${factory_script_file};" \
211 "fi\0" \
212 "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
213 "source ${loadaddr}\0" \
214 "factory_flash_img="\
215 "echo 'Flash mccmon6 with factory images'; " \
216 "if run factory_load_script; then " \
217 "run factory_script;" \
218 "else " \
219 "echo No factory script: ${factory_script_file} found on " \
220 "device ${mmcdev};" \
221 "run factory_nor_img;" \
222 "run factory_eMMC_img;" \
223 "fi\0" \
224 "factory_eMMC_img="\
225 "echo 'Update mccmon6 eMMC image'; " \
226 "if load mmc ${mmcdev}:${mmcfactorypart} " \
227 "${loadaddr} ${emmc_img_file}; then " \
228 "setexpr fw_sz ${filesize} / 0x200;" \
229 "setexpr fw_sz ${fw_sz} + 1;" \
230 "mmc dev ${mmcfactorydev};" \
231 "mmc write ${loadaddr} 0x0 ${fw_sz};" \
232 "fi\0" \
233 "factory_nor_img="\
234 "echo 'Update mccmon6 NOR image'; " \
235 "if load mmc ${mmcdev}:${mmcfactorypart} " \
236 "${nor_img_addr} ${nor_img_file}; then " \
237 "run nor_update;" \
238 "fi\0" \
239 "nor_update=" \
240 "protect off ${nor_bank_start} +${nor_img_size};" \
241 "erase ${nor_bank_start} +${nor_img_size};" \
242 "setexpr nor_img_size ${nor_img_size} / 4; " \
243 "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
244 "tftp_nor_uboot="\
245 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
246 "setenv nor_img_file u-boot.img; " \
247 "setenv nor_img_size 0x80000; " \
248 "setenv nor_bank_start 0x08080000; " \
249 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
250 "run nor_update;" \
251 "fi\0" \
252 "tftp_nor_uImg="\
253 "echo 'Update mccmon6 NOR uImage via TFTP'; " \
254 "setenv nor_img_file uImage; " \
255 "setenv nor_img_size 0x500000; " \
256 "setenv nor_bank_start 0x08180000; " \
257 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
258 "run nor_update;" \
259 "fi\0" \
260 "tftp_nor_dtb="\
261 "echo 'Update mccmon6 NOR DTB via TFTP'; " \
262 "setenv nor_img_file imx6q-mccmon6.dtb; " \
263 "setenv nor_img_size 0x20000; " \
264 "setenv nor_bank_start 0x09980000; " \
265 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
266 "run nor_update;" \
267 "fi\0" \
268 "tftp_nor_img="\
269 "echo 'Update mccmon6 NOR image via TFTP'; " \
270 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
271 "run nor_update;" \
272 "fi\0" \
273 "tftp_nor_SPL="\
274 "if tftp ${load_addr} SPL_padded; then " \
275 "erase 0x08000000 +0x20000;" \
276 "cp.b ${load_addr} 0x08000000 0x20000;" \
277 "fi;\0" \
278 "tftp_sd_SPL="\
279 "if mmc dev 1; then " \
280 "if tftp ${load_addr} ${SPL_file}; then " \
281 "setexpr fw_sz ${filesize} / 0x200; " \
282 "setexpr fw_sz ${fw_sz} + 1; " \
283 "mmc write ${load_addr} 0x2 ${fw_sz};" \
284 "fi;" \
285 "fi;\0" \
286 "tftp_sd_uboot="\
287 "if mmc dev 1; then " \
288 "if run load_uboot; then " \
289 "setexpr fw_sz ${filesize} / 0x200; " \
290 "setexpr fw_sz ${fw_sz} + 1; " \
291 "mmc write ${load_addr} 0x8A ${fw_sz};" \
292 "fi;" \
293 "fi;\0"
294
295
296#define CONFIG_NR_DRAM_BANKS 1
297#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
298
299#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
300#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
301#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
302
303#define CONFIG_SYS_INIT_SP_OFFSET \
304 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
305#define CONFIG_SYS_INIT_SP_ADDR \
306 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
307
308
309#define CONFIG_ENV_SIZE (SZ_128K)
310
311
312#define CONFIG_ENV_SECT_SIZE (SZ_128K)
313#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
314
315#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
316#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x60000)
317#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
318
319#endif
320
