LXR uboot/include/configs/origen.h

   1/*
   2 * Copyright (C) 2011 Samsung Electronics
   3 *
   4 * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIG_ORIGEN_H
  10#define __CONFIG_ORIGEN_H
  11
  12#include <configs/exynos4-common.h>
  13
  14/* High Level Configuration Options */
  15#define CONFIG_EXYNOS4210               1       /* which is a EXYNOS4210 SoC */
  16#define CONFIG_ORIGEN                   1       /* working with ORIGEN*/
  17
  18#define CONFIG_SYS_DCACHE_OFF           1
  19
  20/* ORIGEN has 4 bank of DRAM */
  21#define CONFIG_NR_DRAM_BANKS            4
  22#define CONFIG_SYS_SDRAM_BASE           0x40000000
  23#define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  24#define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  25
  26/* memtest works on */
  27#define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  28#define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x6000000)
  29#define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  30
  31#define CONFIG_SYS_TEXT_BASE            0x43E00000
  32
  33#define CONFIG_MACH_TYPE                MACH_TYPE_ORIGEN
  34
  35/* select serial console configuration */
  36#define CONFIG_SERIAL2
  37
  38/* Console configuration */
  39#define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  40
  41#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  42
  43#define CONFIG_SYS_MONITOR_BASE 0x00000000
  44
  45/* Power Down Modes */
  46#define S5P_CHECK_SLEEP                 0x00000BAD
  47#define S5P_CHECK_DIDLE                 0xBAD00000
  48#define S5P_CHECK_LPA                   0xABAD0000
  49
  50#define CONFIG_SUPPORT_RAW_INITRD
  51
  52/* MMC SPL */
  53#define COPY_BL2_FNPTR_ADDR     0x02020030
  54#define CONFIG_SPL_TEXT_BASE    0x02021410
  55
  56#define CONFIG_EXTRA_ENV_SETTINGS \
  57        "loadaddr=0x40007000\0" \
  58        "rdaddr=0x48000000\0" \
  59        "kerneladdr=0x40007000\0" \
  60        "ramdiskaddr=0x48000000\0" \
  61        "console=ttySAC2,115200n8\0" \
  62        "mmcdev=0\0" \
  63        "bootenv=uEnv.txt\0" \
  64        "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
  65        "importbootenv=echo Importing environment from mmc ...; " \
  66                "env import -t $loadaddr $filesize\0" \
  67        "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  68        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
  69                "source ${loadaddr}\0"
  70#define CONFIG_BOOTCOMMAND \
  71        "if mmc rescan; then " \
  72                "echo SD/MMC found on device ${mmcdev};" \
  73                "if run loadbootenv; then " \
  74                        "echo Loaded environment from ${bootenv};" \
  75                        "run importbootenv;" \
  76                "fi;" \
  77                "if test -n $uenvcmd; then " \
  78                        "echo Running uenvcmd ...;" \
  79                        "run uenvcmd;" \
  80                "fi;" \
  81                "if run loadbootscript; then " \
  82                        "run bootscript; " \
  83                "fi; " \
  84        "fi;" \
  85        "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
  86
  87#define CONFIG_CLK_1000_400_200
  88
  89/* MIU (Memory Interleaving Unit) */
  90#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
  91
  92#define CONFIG_SYS_MMC_ENV_DEV          0
  93#define CONFIG_ENV_SIZE                 (16 << 10)      /* 16 KB */
  94#define RESERVE_BLOCK_SIZE              (512)
  95#define BL1_SIZE                        (16 << 10) /*16 K reserved for BL1*/
  96#define CONFIG_ENV_OFFSET               (RESERVE_BLOCK_SIZE + BL1_SIZE)
  97
  98#define CONFIG_SPL_MAX_FOOTPRINT        (14 * 1024)
  99
 100#define CONFIG_SYS_INIT_SP_ADDR         0x02040000
 101
 102/* U-Boot copy size from boot Media to DRAM.*/
 103#define COPY_BL2_SIZE           0x80000
 104#define BL2_START_OFFSET        ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
 105#define BL2_SIZE_BLOC_COUNT     (COPY_BL2_SIZE/512)
 106
 107#endif  /* __CONFIG_H */
 108