/*
 * (C) Copyright 2008 Semihalf
 *
 * (C) Copyright 2000-2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:     GPL-2.0+
 ********************************************************************
 * NOTE: This header file defines an interface to U-Boot. Including
 * this (unmodified) header file in another file is considered normal
 * use of U-Boot, and does *not* fall under the heading of "derived
 * work".
 ********************************************************************
 */

#ifndef __IMAGE_H__
#define __IMAGE_H__

#include "compiler.h"
#include <asm/byteorder.h>

/* Define this to avoid #ifdefs later on */
struct lmb;

#ifdef USE_HOSTCC
#include <sys/types.h>

/* new uImage format support enabled on host */
#define IMAGE_ENABLE_FIT        1
#define IMAGE_ENABLE_OF_LIBFDT  1
#define CONFIG_FIT_VERBOSE      1 /* enable fit_format_{error,warning}() */
#define CONFIG_FIT_ENABLE_SHA256_SUPPORT
#define CONFIG_SHA1
#define CONFIG_SHA256

#define IMAGE_ENABLE_IGNORE     0
#define IMAGE_INDENT_STRING     ""

#else

#include <lmb.h>
#include <asm/u-boot.h>
#include <command.h>

/* Take notice of the 'ignore' property for hashes */
#define IMAGE_ENABLE_IGNORE     1
#define IMAGE_INDENT_STRING     "   "

#define IMAGE_ENABLE_FIT        CONFIG_IS_ENABLED(FIT)
#define IMAGE_ENABLE_OF_LIBFDT  CONFIG_IS_ENABLED(OF_LIBFDT)

#endif /* USE_HOSTCC */

#if IMAGE_ENABLE_FIT
#include <hash.h>
#include <libfdt.h>
#include <fdt_support.h>
# ifdef CONFIG_SPL_BUILD
#  ifdef CONFIG_SPL_CRC32_SUPPORT
#   define IMAGE_ENABLE_CRC32   1
#  endif
#  ifdef CONFIG_SPL_MD5_SUPPORT
#   define IMAGE_ENABLE_MD5     1
#  endif
#  ifdef CONFIG_SPL_SHA1_SUPPORT
#   define IMAGE_ENABLE_SHA1    1
#  endif
# else
#  define CONFIG_CRC32          /* FIT images need CRC32 support */
#  define IMAGE_ENABLE_CRC32    1
#  define IMAGE_ENABLE_MD5      1
#  define IMAGE_ENABLE_SHA1     1
# endif

#ifndef IMAGE_ENABLE_CRC32
#define IMAGE_ENABLE_CRC32      0
#endif

#ifndef IMAGE_ENABLE_MD5
#define IMAGE_ENABLE_MD5        0
#endif

#ifndef IMAGE_ENABLE_SHA1
#define IMAGE_ENABLE_SHA1       0
#endif

#if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \
        defined(CONFIG_SPL_SHA256_SUPPORT)
#define IMAGE_ENABLE_SHA256     1
#else
#define IMAGE_ENABLE_SHA256     0
#endif

#endif /* IMAGE_ENABLE_FIT */

#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
# define IMAGE_BOOT_GET_CMDLINE         1
#else
# define IMAGE_BOOT_GET_CMDLINE         0
#endif

#ifdef CONFIG_OF_BOARD_SETUP
# define IMAGE_OF_BOARD_SETUP           1
#else
# define IMAGE_OF_BOARD_SETUP           0
#endif

#ifdef CONFIG_OF_SYSTEM_SETUP
# define IMAGE_OF_SYSTEM_SETUP  1
#else
# define IMAGE_OF_SYSTEM_SETUP  0
#endif

enum ih_category {
        IH_ARCH,
        IH_COMP,
        IH_OS,
        IH_TYPE,

        IH_COUNT,
};

/*
 * Operating System Codes
 *
 * The following are exposed to uImage header.
 * Do not change values for backward compatibility.
 */
enum {
        IH_OS_INVALID           = 0,    /* Invalid OS   */
        IH_OS_OPENBSD,                  /* OpenBSD      */
        IH_OS_NETBSD,                   /* NetBSD       */
        IH_OS_FREEBSD,                  /* FreeBSD      */
        IH_OS_4_4BSD,                   /* 4.4BSD       */
        IH_OS_LINUX,                    /* Linux        */
        IH_OS_SVR4,                     /* SVR4         */
        IH_OS_ESIX,                     /* Esix         */
        IH_OS_SOLARIS,                  /* Solaris      */
        IH_OS_IRIX,                     /* Irix         */
        IH_OS_SCO,                      /* SCO          */
        IH_OS_DELL,                     /* Dell         */
        IH_OS_NCR,                      /* NCR          */
        IH_OS_LYNXOS,                   /* LynxOS       */
        IH_OS_VXWORKS,                  /* VxWorks      */
        IH_OS_PSOS,                     /* pSOS         */
        IH_OS_QNX,                      /* QNX          */
        IH_OS_U_BOOT,                   /* Firmware     */
        IH_OS_RTEMS,                    /* RTEMS        */
        IH_OS_ARTOS,                    /* ARTOS        */
        IH_OS_UNITY,                    /* Unity OS     */
        IH_OS_INTEGRITY,                /* INTEGRITY    */
        IH_OS_OSE,                      /* OSE          */
        IH_OS_PLAN9,                    /* Plan 9       */
        IH_OS_OPENRTOS,         /* OpenRTOS     */

        IH_OS_COUNT,
};

/*
 * CPU Architecture Codes (supported by Linux)
 *
 * The following are exposed to uImage header.
 * Do not change values for backward compatibility.
 */
enum {
        IH_ARCH_INVALID         = 0,    /* Invalid CPU  */
        IH_ARCH_ALPHA,                  /* Alpha        */
        IH_ARCH_ARM,                    /* ARM          */
        IH_ARCH_I386,                   /* Intel x86    */
        IH_ARCH_IA64,                   /* IA64         */
        IH_ARCH_MIPS,                   /* MIPS         */
        IH_ARCH_MIPS64,                 /* MIPS  64 Bit */
        IH_ARCH_PPC,                    /* PowerPC      */
        IH_ARCH_S390,                   /* IBM S390     */
        IH_ARCH_SH,                     /* SuperH       */
        IH_ARCH_SPARC,                  /* Sparc        */
        IH_ARCH_SPARC64,                /* Sparc 64 Bit */
        IH_ARCH_M68K,                   /* M68K         */
        IH_ARCH_NIOS,                   /* Nios-32      */
        IH_ARCH_MICROBLAZE,             /* MicroBlaze   */
        IH_ARCH_NIOS2,                  /* Nios-II      */
        IH_ARCH_BLACKFIN,               /* Blackfin     */
        IH_ARCH_AVR32,                  /* AVR32        */
        IH_ARCH_ST200,                  /* STMicroelectronics ST200  */
        IH_ARCH_SANDBOX,                /* Sandbox architecture (test only) */
        IH_ARCH_NDS32,                  /* ANDES Technology - NDS32  */
        IH_ARCH_OPENRISC,               /* OpenRISC 1000  */
        IH_ARCH_ARM64,                  /* ARM64        */
        IH_ARCH_ARC,                    /* Synopsys DesignWare ARC */
        IH_ARCH_X86_64,                 /* AMD x86_64, Intel and Via */
        IH_ARCH_XTENSA,                 /* Xtensa       */

        IH_ARCH_COUNT,
};

/*
 * Image Types
 *
 * "Standalone Programs" are directly runnable in the environment
 *      provided by U-Boot; it is expected that (if they behave
 *      well) you can continue to work in U-Boot after return from
 *      the Standalone Program.
 * "OS Kernel Images" are usually images of some Embedded OS which
 *      will take over control completely. Usually these programs
 *      will install their own set of exception handlers, device
 *      drivers, set up the MMU, etc. - this means, that you cannot
 *      expect to re-enter U-Boot except by resetting the CPU.
 * "RAMDisk Images" are more or less just data blocks, and their
 *      parameters (address, size) are passed to an OS kernel that is
 *      being started.
 * "Multi-File Images" contain several images, typically an OS
 *      (Linux) kernel image and one or more data images like
 *      RAMDisks. This construct is useful for instance when you want
 *      to boot over the network using BOOTP etc., where the boot
 *      server provides just a single image file, but you want to get
 *      for instance an OS kernel and a RAMDisk image.
 *
 *      "Multi-File Images" start with a list of image sizes, each
 *      image size (in bytes) specified by an "uint32_t" in network
 *      byte order. This list is terminated by an "(uint32_t)0".
 *      Immediately after the terminating 0 follow the images, one by
 *      one, all aligned on "uint32_t" boundaries (size rounded up to
 *      a multiple of 4 bytes - except for the last file).
 *
 * "Firmware Images" are binary images containing firmware (like
 *      U-Boot or FPGA images) which usually will be programmed to
 *      flash memory.
 *
 * "Script files" are command sequences that will be executed by
 *      U-Boot's command interpreter; this feature is especially
 *      useful when you configure U-Boot to use a real shell (hush)
 *      as command interpreter (=> Shell Scripts).
 *
 * The following are exposed to uImage header.
 * Do not change values for backward compatibility.
 */

enum {
        IH_TYPE_INVALID         = 0,    /* Invalid Image                */
        IH_TYPE_STANDALONE,             /* Standalone Program           */
        IH_TYPE_KERNEL,                 /* OS Kernel Image              */
        IH_TYPE_RAMDISK,                /* RAMDisk Image                */
        IH_TYPE_MULTI,                  /* Multi-File Image             */
        IH_TYPE_FIRMWARE,               /* Firmware Image               */
        IH_TYPE_SCRIPT,                 /* Script file                  */
        IH_TYPE_FILESYSTEM,             /* Filesystem Image (any type)  */
        IH_TYPE_FLATDT,                 /* Binary Flat Device Tree Blob */
        IH_TYPE_KWBIMAGE,               /* Kirkwood Boot Image          */
        IH_TYPE_IMXIMAGE,               /* Freescale IMXBoot Image      */
        IH_TYPE_UBLIMAGE,               /* Davinci UBL Image            */
        IH_TYPE_OMAPIMAGE,              /* TI OMAP Config Header Image  */
        IH_TYPE_AISIMAGE,               /* TI Davinci AIS Image         */
        /* OS Kernel Image, can run from any load address */
        IH_TYPE_KERNEL_NOLOAD,
        IH_TYPE_PBLIMAGE,               /* Freescale PBL Boot Image     */
        IH_TYPE_MXSIMAGE,               /* Freescale MXSBoot Image      */
        IH_TYPE_GPIMAGE,                /* TI Keystone GPHeader Image   */
        IH_TYPE_ATMELIMAGE,             /* ATMEL ROM bootable Image     */
        IH_TYPE_SOCFPGAIMAGE,           /* Altera SOCFPGA Preloader     */
        IH_TYPE_X86_SETUP,              /* x86 setup.bin Image          */
        IH_TYPE_LPC32XXIMAGE,           /* x86 setup.bin Image          */
        IH_TYPE_LOADABLE,               /* A list of typeless images    */
        IH_TYPE_RKIMAGE,                /* Rockchip Boot Image          */
        IH_TYPE_RKSD,                   /* Rockchip SD card             */
        IH_TYPE_RKSPI,                  /* Rockchip SPI image           */
        IH_TYPE_ZYNQIMAGE,              /* Xilinx Zynq Boot Image */
        IH_TYPE_ZYNQMPIMAGE,            /* Xilinx ZynqMP Boot Image */
        IH_TYPE_FPGA,                   /* FPGA Image */
        IH_TYPE_VYBRIDIMAGE,    /* VYBRID .vyb Image */
        IH_TYPE_TEE,            /* Trusted Execution Environment OS Image */
        IH_TYPE_FIRMWARE_IVT,           /* Firmware Image with HABv4 IVT */

        IH_TYPE_COUNT,                  /* Number of image types */
};

/*
 * Compression Types
 *
 * The following are exposed to uImage header.
 * Do not change values for backward compatibility.
 */
enum {
        IH_COMP_NONE            = 0,    /*  No   Compression Used       */
        IH_COMP_GZIP,                   /* gzip  Compression Used       */
        IH_COMP_BZIP2,                  /* bzip2 Compression Used       */
        IH_COMP_LZMA,                   /* lzma  Compression Used       */
        IH_COMP_LZO,                    /* lzo   Compression Used       */
        IH_COMP_LZ4,                    /* lz4   Compression Used       */

        IH_COMP_COUNT,
};

#define IH_MAGIC        0x27051956      /* Image Magic Number           */
#define IH_NMLEN                32      /* Image Name Length            */

/* Reused from common.h */
#define ROUND(a, b)             (((a) + (b) - 1) & ~((b) - 1))

/*
 * Legacy format image header,
 * all data in network byte order (aka natural aka bigendian).
 */
typedef struct image_header {
        __be32          ih_magic;       /* Image Header Magic Number    */
        __be32          ih_hcrc;        /* Image Header CRC Checksum    */
        __be32          ih_time;        /* Image Creation Timestamp     */
        __be32          ih_size;        /* Image Data Size              */
        __be32          ih_load;        /* Data  Load  Address          */
        __be32          ih_ep;          /* Entry Point Address          */
        __be32          ih_dcrc;        /* Image Data CRC Checksum      */
        uint8_t         ih_os;          /* Operating System             */
        uint8_t         ih_arch;        /* CPU architecture             */
        uint8_t         ih_type;        /* Image Type                   */
        uint8_t         ih_comp;        /* Compression Type             */
        uint8_t         ih_name[IH_NMLEN];      /* Image Name           */
} image_header_t;

typedef struct image_info {
        ulong           start, end;             /* start/end of blob */
        ulong           image_start, image_len; /* start of image within blob, len of image */
        ulong           load;                   /* load addr for the image */
        uint8_t         comp, type, os;         /* compression, type of image, os type */
        uint8_t         arch;                   /* CPU architecture */
} image_info_t;

/*
 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
 * routines.
 */
typedef struct bootm_headers {
        /*
         * Legacy os image header, if it is a multi component image
         * then boot_get_ramdisk() and get_fdt() will attempt to get
         * data from second and third component accordingly.
         */
        image_header_t  *legacy_hdr_os;         /* image header pointer */
        image_header_t  legacy_hdr_os_copy;     /* header copy */
        ulong           legacy_hdr_valid;

#if IMAGE_ENABLE_FIT
        const char      *fit_uname_cfg; /* configuration node unit name */

        void            *fit_hdr_os;    /* os FIT image header */
        const char      *fit_uname_os;  /* os subimage node unit name */
        int             fit_noffset_os; /* os subimage node offset */

        void            *fit_hdr_rd;    /* init ramdisk FIT image header */
        const char      *fit_uname_rd;  /* init ramdisk subimage node unit name */
        int             fit_noffset_rd; /* init ramdisk subimage node offset */

        void            *fit_hdr_fdt;   /* FDT blob FIT image header */
        const char      *fit_uname_fdt; /* FDT blob subimage node unit name */
        int             fit_noffset_fdt;/* FDT blob subimage node offset */

        void            *fit_hdr_setup; /* x86 setup FIT image header */
        const char      *fit_uname_setup; /* x86 setup subimage node name */
        int             fit_noffset_setup;/* x86 setup subimage node offset */
#endif

#ifndef USE_HOSTCC
        image_info_t    os;             /* os image info */
        ulong           ep;             /* entry point of OS */

        ulong           rd_start, rd_end;/* ramdisk start/end */

        char            *ft_addr;       /* flat dev tree address */
        ulong           ft_len;         /* length of flat device tree */

        ulong           initrd_start;
        ulong           initrd_end;
        ulong           cmdline_start;
        ulong           cmdline_end;
        bd_t            *kbd;
#endif

        int             verify;         /* env_get("verify")[0] != 'n' */

#define BOOTM_STATE_START       (0x00000001)
#define BOOTM_STATE_FINDOS      (0x00000002)
#define BOOTM_STATE_FINDOTHER   (0x00000004)
#define BOOTM_STATE_LOADOS      (0x00000008)
#define BOOTM_STATE_RAMDISK     (0x00000010)
#define BOOTM_STATE_FDT         (0x00000020)
#define BOOTM_STATE_OS_CMDLINE  (0x00000040)
#define BOOTM_STATE_OS_BD_T     (0x00000080)
#define BOOTM_STATE_OS_PREP     (0x00000100)
#define BOOTM_STATE_OS_FAKE_GO  (0x00000200)    /* 'Almost' run the OS */
#define BOOTM_STATE_OS_GO       (0x00000400)
        int             state;

#ifdef CONFIG_LMB
        struct lmb      lmb;            /* for memory mgmt */
#endif
} bootm_headers_t;

extern bootm_headers_t images;

/*
 * Some systems (for example LWMON) have very short watchdog periods;
 * we must make sure to split long operations like memmove() or
 * checksum calculations into reasonable chunks.
 */
#ifndef CHUNKSZ
#define CHUNKSZ (64 * 1024)
#endif

#ifndef CHUNKSZ_CRC32
#define CHUNKSZ_CRC32 (64 * 1024)
#endif

#ifndef CHUNKSZ_MD5
#define CHUNKSZ_MD5 (64 * 1024)
#endif

#ifndef CHUNKSZ_SHA1
#define CHUNKSZ_SHA1 (64 * 1024)
#endif

#define uimage_to_cpu(x)                be32_to_cpu(x)
#define cpu_to_uimage(x)                cpu_to_be32(x)

/*
 * Translation table for entries of a specific type; used by
 * get_table_entry_id() and get_table_entry_name().
 */
typedef struct table_entry {
        int     id;
        char    *sname;         /* short (input) name to find table entry */
        char    *lname;         /* long (output) name to print for messages */
} table_entry_t;

/*
 * get_table_entry_id() scans the translation table trying to find an
 * entry that matches the given short name. If a matching entry is
 * found, it's id is returned to the caller.
 */
int get_table_entry_id(const table_entry_t *table,
                const char *table_name, const char *name);
/*
 * get_table_entry_name() scans the translation table trying to find
 * an entry that matches the given id. If a matching entry is found,
 * its long name is returned to the caller.
 */
char *get_table_entry_name(const table_entry_t *table, char *msg, int id);

const char *genimg_get_os_name(uint8_t os);

/**
 * genimg_get_os_short_name() - get the short name for an OS
 *
 * @param os    OS (IH_OS_...)
 * @return OS short name, or "unknown" if unknown
 */
const char *genimg_get_os_short_name(uint8_t comp);

const char *genimg_get_arch_name(uint8_t arch);

/**
 * genimg_get_arch_short_name() - get the short name for an architecture
 *
 * @param arch  Architecture type (IH_ARCH_...)
 * @return architecture short name, or "unknown" if unknown
 */
const char *genimg_get_arch_short_name(uint8_t arch);

const char *genimg_get_type_name(uint8_t type);

/**
 * genimg_get_type_short_name() - get the short name for an image type
 *
 * @param type  Image type (IH_TYPE_...)
 * @return image short name, or "unknown" if unknown
 */
const char *genimg_get_type_short_name(uint8_t type);

const char *genimg_get_comp_name(uint8_t comp);

/**
 * genimg_get_comp_short_name() - get the short name for a compression method
 *
 * @param comp  compression method (IH_COMP_...)
 * @return compression method short name, or "unknown" if unknown
 */
const char *genimg_get_comp_short_name(uint8_t comp);

/**
 * genimg_get_cat_name() - Get the name of an item in a category
 *
 * @category:   Category of item
 * @id:         Item ID
 * @return name of item, or "Unknown ..." if unknown
 */
const char *genimg_get_cat_name(enum ih_category category, uint id);

/**
 * genimg_get_cat_short_name() - Get the short name of an item in a category
 *
 * @category:   Category of item
 * @id:         Item ID
 * @return short name of item, or "Unknown ..." if unknown
 */
const char *genimg_get_cat_short_name(enum ih_category category, uint id);

/**
 * genimg_get_cat_count() - Get the number of items in a category
 *
 * @category:   Category to check
 * @return the number of items in the category (IH_xxx_COUNT)
 */
int genimg_get_cat_count(enum ih_category category);

/**
 * genimg_get_cat_desc() - Get the description of a category
 *
 * @return the description of a category, e.g. "architecture". This
 * effectively converts the enum to a string.
 */
const char *genimg_get_cat_desc(enum ih_category category);

int genimg_get_os_id(const char *name);
int genimg_get_arch_id(const char *name);
int genimg_get_type_id(const char *name);
int genimg_get_comp_id(const char *name);
void genimg_print_size(uint32_t size);

#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
        defined(USE_HOSTCC)
#define IMAGE_ENABLE_TIMESTAMP 1
#else
#define IMAGE_ENABLE_TIMESTAMP 0
#endif
void genimg_print_time(time_t timestamp);

/* What to do with a image load address ('load = <> 'in the FIT) */
enum fit_load_op {
        FIT_LOAD_IGNORED,       /* Ignore load address */
        FIT_LOAD_OPTIONAL,      /* Can be provided, but optional */
        FIT_LOAD_OPTIONAL_NON_ZERO,     /* Optional, a value of 0 is ignored */
        FIT_LOAD_REQUIRED,      /* Must be provided */
};

int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start,
                   ulong *setup_len);

#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID    0x00
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
#define IMAGE_FORMAT_LEGACY     0x01    /* legacy image_header based format */
#endif
#define IMAGE_FORMAT_FIT        0x02    /* new, libfdt based format */
#define IMAGE_FORMAT_ANDROID    0x03    /* Android boot image */

ulong genimg_get_kernel_addr_fit(char * const img_addr,
                                 const char **fit_uname_config,
                                 const char **fit_uname_kernel);
ulong genimg_get_kernel_addr(char * const img_addr);
int genimg_get_format(const void *img_addr);
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);

int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
                uint8_t arch, const ulong *ld_start, ulong * const ld_len);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
                uint8_t arch, ulong *rd_start, ulong *rd_end);

/**
 * boot_get_loadable - routine to load a list of binaries to memory
 * @argc: Ignored Argument
 * @argv: Ignored Argument
 * @images: pointer to the bootm images structure
 * @arch: expected architecture for the image
 * @ld_start: Ignored Argument
 * @ld_len: Ignored Argument
 *
 * boot_get_loadable() will take the given FIT configuration, and look
 * for a field named "loadables".  Loadables, is a list of elements in
 * the FIT given as strings.  exe:
 *   loadables = "linux_kernel@1", "fdt@2";
 * this function will attempt to parse each string, and load the
 * corresponding element from the FIT into memory.  Once placed,
 * no aditional actions are taken.
 *
 * @return:
 *     0, if only valid images or no images are found
 *     error code, if an error occurs during fit_image_load
 */
int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
                uint8_t arch, const ulong *ld_start, ulong * const ld_len);
#endif /* !USE_HOSTCC */

int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
                       ulong *setup_start, ulong *setup_len);

/**
 * fit_image_load() - load an image from a FIT
 *
 * This deals with all aspects of loading an image from a FIT, including
 * selecting the right image based on configuration, verifying it, printing
 * out progress messages, checking the type/arch/os and optionally copying it
 * to the right load address.
 *
 * The property to look up is defined by image_type.
 *
 * @param images        Boot images structure
 * @param addr          Address of FIT in memory
 * @param fit_unamep    On entry this is the requested image name
 *                      (e.g. "kernel@1") or NULL to use the default. On exit
 *                      points to the selected image name
 * @param fit_uname_configp     On entry this is the requested configuration
 *                      name (e.g. "conf@1") or NULL to use the default. On
 *                      exit points to the selected configuration name.
 * @param arch          Expected architecture (IH_ARCH_...)
 * @param image_type    Required image type (IH_TYPE_...). If this is
 *                      IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
 *                      also.
 * @param bootstage_id  ID of starting bootstage to use for progress updates.
 *                      This will be added to the BOOTSTAGE_SUB values when
 *                      calling bootstage_mark()
 * @param load_op       Decribes what to do with the load address
 * @param datap         Returns address of loaded image
 * @param lenp          Returns length of loaded image
 * @return node offset of image, or -ve error code on error
 */
int fit_image_load(bootm_headers_t *images, ulong addr,
                   const char **fit_unamep, const char **fit_uname_configp,
                   int arch, int image_type, int bootstage_id,
                   enum fit_load_op load_op, ulong *datap, ulong *lenp);

#ifndef USE_HOSTCC
/**
 * fit_get_node_from_config() - Look up an image a FIT by type
 *
 * This looks in the selected conf@ node (images->fit_uname_cfg) for a
 * particular image type (e.g. "kernel") and then finds the image that is
 * referred to.
 *
 * For example, for something like:
 *
 * images {
 *      kernel@1 {
 *              ...
 *      };
 * };
 * configurations {
 *      conf@1 {
 *              kernel = "kernel@1";
 *      };
 * };
 *
 * the function will return the node offset of the kernel@1 node, assuming
 * that conf@1 is the chosen configuration.
 *
 * @param images        Boot images structure
 * @param prop_name     Property name to look up (FIT_..._PROP)
 * @param addr          Address of FIT in memory
 */
int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
                        ulong addr);

int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
                 bootm_headers_t *images,
                 char **of_flat_tree, ulong *of_size);
void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);

int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
                  ulong *initrd_start, ulong *initrd_end);
int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
#ifdef CONFIG_SYS_BOOT_GET_KBD
int boot_get_kbd(struct lmb *lmb, bd_t **kbd);
#endif /* CONFIG_SYS_BOOT_GET_KBD */
#endif /* !USE_HOSTCC */

/*******************************************************************/
/* Legacy format specific code (prefixed with image_) */
/*******************************************************************/
static inline uint32_t image_get_header_size(void)
{
        return (sizeof(image_header_t));
}

#define image_get_hdr_l(f) \
        static inline uint32_t image_get_##f(const image_header_t *hdr) \
        { \
                return uimage_to_cpu(hdr->ih_##f); \
        }
image_get_hdr_l(magic)          /* image_get_magic */
image_get_hdr_l(hcrc)           /* image_get_hcrc */
image_get_hdr_l(time)           /* image_get_time */
image_get_hdr_l(size)           /* image_get_size */
image_get_hdr_l(load)           /* image_get_load */
image_get_hdr_l(ep)             /* image_get_ep */
image_get_hdr_l(dcrc)           /* image_get_dcrc */

#define image_get_hdr_b(f) \
        static inline uint8_t image_get_##f(const image_header_t *hdr) \
        { \
                return hdr->ih_##f; \
        }
image_get_hdr_b(os)             /* image_get_os */
image_get_hdr_b(arch)           /* image_get_arch */
image_get_hdr_b(type)           /* image_get_type */
image_get_hdr_b(comp)           /* image_get_comp */

static inline char *image_get_name(const image_header_t *hdr)
{
        return (char *)hdr->ih_name;
}

static inline uint32_t image_get_data_size(const image_header_t *hdr)
{
        return image_get_size(hdr);
}

/**
 * image_get_data - get image payload start address
 * @hdr: image header
 *
 * image_get_data() returns address of the image payload. For single
 * component images it is image data start. For multi component
 * images it points to the null terminated table of sub-images sizes.
 *
 * returns:
 *     image payload data start address
 */
static inline ulong image_get_data(const image_header_t *hdr)
{
        return ((ulong)hdr + image_get_header_size());
}

static inline uint32_t image_get_image_size(const image_header_t *hdr)
{
        return (image_get_size(hdr) + image_get_header_size());
}
static inline ulong image_get_image_end(const image_header_t *hdr)
{
        return ((ulong)hdr + image_get_image_size(hdr));
}

#define image_set_hdr_l(f) \
        static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
        { \
                hdr->ih_##f = cpu_to_uimage(val); \
        }
image_set_hdr_l(magic)          /* image_set_magic */
image_set_hdr_l(hcrc)           /* image_set_hcrc */
image_set_hdr_l(time)           /* image_set_time */
image_set_hdr_l(size)           /* image_set_size */
image_set_hdr_l(load)           /* image_set_load */
image_set_hdr_l(ep)             /* image_set_ep */
image_set_hdr_l(dcrc)           /* image_set_dcrc */

#define image_set_hdr_b(f) \
        static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
        { \
                hdr->ih_##f = val; \
        }
image_set_hdr_b(os)             /* image_set_os */
image_set_hdr_b(arch)           /* image_set_arch */
image_set_hdr_b(type)           /* image_set_type */
image_set_hdr_b(comp)           /* image_set_comp */

static inline void image_set_name(image_header_t *hdr, const char *name)
{
        strncpy(image_get_name(hdr), name, IH_NMLEN);
}

int image_check_hcrc(const image_header_t *hdr);
int image_check_dcrc(const image_header_t *hdr);
#ifndef USE_HOSTCC
ulong env_get_bootm_low(void);
phys_size_t env_get_bootm_size(void);
phys_size_t env_get_bootm_mapsize(void);
#endif
void memmove_wd(void *to, void *from, size_t len, ulong chunksz);

static inline int image_check_magic(const image_header_t *hdr)
{
        return (image_get_magic(hdr) == IH_MAGIC);
}
static inline int image_check_type(const image_header_t *hdr, uint8_t type)
{
        return (image_get_type(hdr) == type);
}
static inline int image_check_arch(const image_header_t *hdr, uint8_t arch)
{
        return (image_get_arch(hdr) == arch) ||
                (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64);
}
static inline int image_check_os(const image_header_t *hdr, uint8_t os)
{
        return (image_get_os(hdr) == os);
}

ulong image_multi_count(const image_header_t *hdr);
void image_multi_getimg(const image_header_t *hdr, ulong idx,
                        ulong *data, ulong *len);

void image_print_contents(const void *hdr);

#ifndef USE_HOSTCC
static inline int image_check_target_arch(const image_header_t *hdr)
{
#ifndef IH_ARCH_DEFAULT
# error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
#endif
        return image_check_arch(hdr, IH_ARCH_DEFAULT);
}
#endif /* USE_HOSTCC */

/**
 * Set up properties in the FDT
 *
 * This sets up properties in the FDT that is to be passed to linux.
 *
 * @images:     Images information
 * @blob:       FDT to update
 * @of_size:    Size of the FDT
 * @lmb:        Points to logical memory block structure
 * @return 0 if ok, <0 on failure
 */
int image_setup_libfdt(bootm_headers_t *images, void *blob,
                       int of_size, struct lmb *lmb);

/**
 * Set up the FDT to use for booting a kernel
 *
 * This performs ramdisk setup, sets up the FDT if required, and adds
 * paramters to the FDT if libfdt is available.
 *
 * @param images        Images information
 * @return 0 if ok, <0 on failure
 */
int image_setup_linux(bootm_headers_t *images);

/**
 * bootz_setup() - Extract stat and size of a Linux xImage
 *
 * @image: Address of image
 * @start: Returns start address of image
 * @end : Returns end address of image
 * @return 0 if OK, 1 if the image was not recognised
 */
int bootz_setup(ulong image, ulong *start, ulong *end);


/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
/*******************************************************************/

#define FIT_IMAGES_PATH         "/images"
#define FIT_CONFS_PATH          "/configurations"

/* hash/signature node */
#define FIT_HASH_NODENAME       "hash"
#define FIT_ALGO_PROP           "algo"
#define FIT_VALUE_PROP          "value"
#define FIT_IGNORE_PROP         "uboot-ignore"
#define FIT_SIG_NODENAME        "signature"

/* image node */
#define FIT_DATA_PROP           "data"
#define FIT_DATA_OFFSET_PROP    "data-offset"
#define FIT_DATA_SIZE_PROP      "data-size"
#define FIT_TIMESTAMP_PROP      "timestamp"
#define FIT_DESC_PROP           "description"
#define FIT_ARCH_PROP           "arch"
#define FIT_TYPE_PROP           "type"
#define FIT_OS_PROP             "os"
#define FIT_COMP_PROP           "compression"
#define FIT_ENTRY_PROP          "entry"
#define FIT_LOAD_PROP           "load"

/* configuration node */
#define FIT_KERNEL_PROP         "kernel"
#define FIT_RAMDISK_PROP        "ramdisk"
#define FIT_FDT_PROP            "fdt"
#define FIT_LOADABLE_PROP       "loadables"
#define FIT_DEFAULT_PROP        "default"
#define FIT_SETUP_PROP          "setup"
#define FIT_FPGA_PROP           "fpga"

#define FIT_MAX_HASH_LEN        HASH_MAX_DIGEST_SIZE

#if IMAGE_ENABLE_FIT
/* cmdline argument format parsing */
int fit_parse_conf(const char *spec, ulong addr_curr,
                ulong *addr, const char **conf_name);
int fit_parse_subimage(const char *spec, ulong addr_curr,
                ulong *addr, const char **image_name);

int fit_get_subimage_count(const void *fit, int images_noffset);
void fit_print_contents(const void *fit);
void fit_image_print(const void *fit, int noffset, const char *p);

/**
 * fit_get_end - get FIT image size
 * @fit: pointer to the FIT format image header
 *
 * returns:
 *     size of the FIT image (blob) in memory
 */
static inline ulong fit_get_size(const void *fit)
{
        return fdt_totalsize(fit);
}

/**
 * fit_get_end - get FIT image end
 * @fit: pointer to the FIT format image header
 *
 * returns:
 *     end address of the FIT image (blob) in memory
 */
ulong fit_get_end(const void *fit);

/**
 * fit_get_name - get FIT node name
 * @fit: pointer to the FIT format image header
 *
 * returns:
 *     NULL, on error
 *     pointer to node name, on success
 */
static inline const char *fit_get_name(const void *fit_hdr,
                int noffset, int *len)
{
        return fdt_get_name(fit_hdr, noffset, len);
}

int fit_get_desc(const void *fit, int noffset, char **desc);
int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp);

int fit_image_get_node(const void *fit, const char *image_uname);
int fit_image_get_os(const void *fit, int noffset, uint8_t *os);
int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch);
int fit_image_get_type(const void *fit, int noffset, uint8_t *type);
int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp);
int fit_image_get_load(const void *fit, int noffset, ulong *load);
int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
int fit_image_get_data(const void *fit, int noffset,
                                const void **data, size_t *size);
int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset);
int fit_image_get_data_size(const void *fit, int noffset, int *data_size);

int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
                                int *value_len);

int fit_set_timestamp(void *fit, int noffset, time_t timestamp);

/**
 * fit_add_verification_data() - add verification data to FIT image nodes
 *
 * @keydir:     Directory containing keys
 * @kwydest:    FDT blob to write public key information to
 * @fit:        Pointer to the FIT format image header
 * @comment:    Comment to add to signature nodes
 * @require_keys: Mark all keys as 'required'
 * @engine_id:  Engine to use for signing
 *
 * Adds hash values for all component images in the FIT blob.
 * Hashes are calculated for all component images which have hash subnodes
 * with algorithm property set to one of the supported hash algorithms.
 *
 * Also add signatures if signature nodes are present.
 *
 * returns
 *     0, on success
 *     libfdt error code, on failure
 */
int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
                              const char *comment, int require_keys,
                              const char *engine_id);

int fit_image_verify(const void *fit, int noffset);
int fit_config_verify(const void *fit, int conf_noffset);
int fit_all_image_verify(const void *fit);
int fit_image_check_os(const void *fit, int noffset, uint8_t os);
int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
int fit_image_check_type(const void *fit, int noffset, uint8_t type);
int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
int fit_check_format(const void *fit);

int fit_conf_find_compat(const void *fit, const void *fdt);
int fit_conf_get_node(const void *fit, const char *conf_uname);

/**
 * fit_conf_get_prop_node() - Get node refered to by a configuration
 * @fit:        FIT to check
 * @noffset:    Offset of conf@xxx node to check
 * @prop_name:  Property to read from the conf node
 *
 * The conf@ nodes contain references to other nodes, using properties
 * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
 * return the offset of the node referred to (e.g. offset of node
 * "/images/kernel@1".
 */
int fit_conf_get_prop_node(const void *fit, int noffset,

                const char *prop_name);

void fit_conf_print(const void *fit, int noffset, const char *p);

int fit_check_ramdisk(const void *fit, int os_noffset,
                uint8_t arch, int verify);

int calculate_hash(const void *data, int data_len, const char *algo,
                        uint8_t *value, int *value_len);

/*
 * At present we only support signing on the host, and verification on the
 * device
 */
#if defined(CONFIG_FIT_SIGNATURE)
# ifdef USE_HOSTCC
#  define IMAGE_ENABLE_SIGN     1
#  define IMAGE_ENABLE_VERIFY   1
# include  <openssl/evp.h>
#else
#  define IMAGE_ENABLE_SIGN     0
#  define IMAGE_ENABLE_VERIFY   1
# endif
#else
# define IMAGE_ENABLE_SIGN      0
# define IMAGE_ENABLE_VERIFY    0
#endif

#ifdef USE_HOSTCC
void *image_get_host_blob(void);
void image_set_host_blob(void *host_blob);
# define gd_fdt_blob()          image_get_host_blob()
#else
# define gd_fdt_blob()          (gd->fdt_blob)
#endif

#ifdef CONFIG_FIT_BEST_MATCH
#define IMAGE_ENABLE_BEST_MATCH 1
#else
#define IMAGE_ENABLE_BEST_MATCH 0
#endif

/* Information passed to the signing routines */
struct image_sign_info {
        const char *keydir;             /* Directory conaining keys */
        const char *keyname;            /* Name of key to use */
        void *fit;                      /* Pointer to FIT blob */
        int node_offset;                /* Offset of signature node */
        const char *name;               /* Algorithm name */
        struct checksum_algo *checksum; /* Checksum algorithm information */
        struct crypto_algo *crypto;     /* Crypto algorithm information */
        const void *fdt_blob;           /* FDT containing public keys */
        int required_keynode;           /* Node offset of key to use: -1=any */
        const char *require_keys;       /* Value for 'required' property */
        const char *engine_id;          /* Engine to use for signing */
};
#endif /* Allow struct image_region to always be defined for rsa.h */

/* A part of an image, used for hashing */
struct image_region {
        const void *data;
        int size;
};

#if IMAGE_ENABLE_FIT

#if IMAGE_ENABLE_VERIFY
# include <u-boot/rsa-checksum.h>
#endif
struct checksum_algo {
        const char *name;
        const int checksum_len;
        const int der_len;
        const uint8_t *der_prefix;
#if IMAGE_ENABLE_SIGN
        const EVP_MD *(*calculate_sign)(void);
#endif
        int (*calculate)(const char *name,
                         const struct image_region region[],
                         int region_count, uint8_t *checksum);
};

struct crypto_algo {
        const char *name;               /* Name of algorithm */
        const int key_len;

        /**
         * sign() - calculate and return signature for given input data
         *
         * @info:       Specifies key and FIT information
         * @data:       Pointer to the input data
         * @data_len:   Data length
         * @sigp:       Set to an allocated buffer holding the signature
         * @sig_len:    Set to length of the calculated hash
         *
         * This computes input data signature according to selected algorithm.
         * Resulting signature value is placed in an allocated buffer, the
         * pointer is returned as *sigp. The length of the calculated
         * signature is returned via the sig_len pointer argument. The caller
         * should free *sigp.
         *
         * @return: 0, on success, -ve on error
         */
        int (*sign)(struct image_sign_info *info,
                    const struct image_region region[],
                    int region_count, uint8_t **sigp, uint *sig_len);

        /**
         * add_verify_data() - Add verification information to FDT
         *
         * Add public key information to the FDT node, suitable for
         * verification at run-time. The information added depends on the
         * algorithm being used.
         *
         * @info:       Specifies key and FIT information
         * @keydest:    Destination FDT blob for public key data
         * @return: 0, on success, -ve on error
         */
        int (*add_verify_data)(struct image_sign_info *info, void *keydest);

        /**
         * verify() - Verify a signature against some data
         *
         * @info:       Specifies key and FIT information
         * @data:       Pointer to the input data
         * @data_len:   Data length
         * @sig:        Signature
         * @sig_len:    Number of bytes in signature
         * @return 0 if verified, -ve on error
         */
        int (*verify)(struct image_sign_info *info,
                      const struct image_region region[], int region_count,
                      uint8_t *sig, uint sig_len);
};

/**
 * image_get_checksum_algo() - Look up a checksum algorithm
 *
 * @param full_name     Name of algorithm in the form "checksum,crypto"
 * @return pointer to algorithm information, or NULL if not found
 */
struct checksum_algo *image_get_checksum_algo(const char *full_name);

/**
 * image_get_crypto_algo() - Look up a cryptosystem algorithm
 *
 * @param full_name     Name of algorithm in the form "checksum,crypto"
 * @return pointer to algorithm information, or NULL if not found
 */
struct crypto_algo *image_get_crypto_algo(const char *full_name);

/**
 * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
 *
 * @fit:                FIT to check
 * @image_noffset:      Offset of image node to check
 * @data:               Image data to check
 * @size:               Size of image data
 * @sig_blob:           FDT containing public keys
 * @no_sigsp:           Returns 1 if no signatures were required, and
 *                      therefore nothing was checked. The caller may wish
 *                      to fall back to other mechanisms, or refuse to
 *                      boot.
 * @return 0 if all verified ok, <0 on error
 */
int fit_image_verify_required_sigs(const void *fit, int image_noffset,
                const char *data, size_t size, const void *sig_blob,
                int *no_sigsp);

/**
 * fit_image_check_sig() - Check a single image signature node
 *
 * @fit:                FIT to check
 * @noffset:            Offset of signature node to check
 * @data:               Image data to check
 * @size:               Size of image data
 * @required_keynode:   Offset in the control FDT of the required key node,
 *                      if any. If this is given, then the image wil not
 *                      pass verification unless that key is used. If this is
 *                      -1 then any signature will do.
 * @err_msgp:           In the event of an error, this will be pointed to a
 *                      help error string to display to the user.
 * @return 0 if all verified ok, <0 on error
 */
int fit_image_check_sig(const void *fit, int noffset, const void *data,
                size_t size, int required_keynode, char **err_msgp);

/**
 * fit_region_make_list() - Make a list of regions to hash
 *
 * Given a list of FIT regions (offset, size) provided by libfdt, create
 * a list of regions (void *, size) for use by the signature creationg
 * and verification code.
 *
 * @fit:                FIT image to process
 * @fdt_regions:        Regions as returned by libfdt
 * @count:              Number of regions returned by libfdt
 * @region:             Place to put list of regions (NULL to allocate it)
 * @return pointer to list of regions, or NULL if out of memory
 */
struct image_region *fit_region_make_list(const void *fit,
                struct fdt_region *fdt_regions, int count,
                struct image_region *region);

static inline int fit_image_check_target_arch(const void *fdt, int node)
{
#ifndef USE_HOSTCC
        return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
#else
        return 0;
#endif
}

#ifdef CONFIG_FIT_VERBOSE
#define fit_unsupported(msg)    printf("! %s:%d " \
                                "FIT images not supported for '%s'\n", \
                                __FILE__, __LINE__, (msg))

#define fit_unsupported_reset(msg)      printf("! %s:%d " \
                                "FIT images not supported for '%s' " \
                                "- must reset board to recover!\n", \
                                __FILE__, __LINE__, (msg))
#else
#define fit_unsupported(msg)
#define fit_unsupported_reset(msg)
#endif /* CONFIG_FIT_VERBOSE */
#endif /* CONFIG_FIT */

#if defined(CONFIG_ANDROID_BOOT_IMAGE)
struct andr_img_hdr;
int android_image_check_header(const struct andr_img_hdr *hdr);
int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify,
                             ulong *os_data, ulong *os_len);
int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
                              ulong *rd_data, ulong *rd_len);
ulong android_image_get_end(const struct andr_img_hdr *hdr);
ulong android_image_get_kload(const struct andr_img_hdr *hdr);
void android_print_contents(const struct andr_img_hdr *hdr);

#endif /* CONFIG_ANDROID_BOOT_IMAGE */

/**
 * board_fit_config_name_match() - Check for a matching board name
 *
 * This is used when SPL loads a FIT containing multiple device tree files
 * and wants to work out which one to use. The description of each one is
 * passed to this function. The description comes from the 'description' field
 * in each (FDT) image node.
 *
 * @name: Device tree description
 * @return 0 if this device tree should be used, non-zero to try the next
 */
int board_fit_config_name_match(const char *name);

#if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \
        defined(CONFIG_FIT_IMAGE_POST_PROCESS)
/**
 * board_fit_image_post_process() - Do any post-process on FIT binary data
 *
 * This is used to do any sort of image manipulation, verification, decryption
 * etc. in a platform or board specific way. Obviously, anything done here would
 * need to be comprehended in how the images were prepared before being injected
 * into the FIT creation (i.e. the binary blobs would have been pre-processed
 * before being added to the FIT image).
 *
 * @image: pointer to the image start pointer
 * @size: pointer to the image size
 * @return no return value (failure should be handled internally)
 */
void board_fit_image_post_process(void **p_image, size_t *p_size);
#endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */

#define FDT_ERROR       ((ulong)(-1))

ulong fdt_getprop_u32(const void *fdt, int node, const char *prop);
int fit_find_config_node(const void *fdt);

/**
 * Mapping of image types to function handlers to be invoked on the associated
 * loaded images
 *
 * @type: Type of image, I.E. IH_TYPE_*
 * @handler: Function to call on loaded image
 */
struct fit_loadable_tbl {
        int type;
        /**
         * handler() - Process a loaded image
         *
         * @data: Pointer to start of loaded image data
         * @size: Size of loaded image data
         */
        void (*handler)(ulong data, size_t size);
};

/*
 * Define a FIT loadable image type handler
 *
 * _type is a valid uimage_type ID as defined in the "Image Type" enum above
 * _handler is the handler function to call after this image type is loaded
 */
#define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \
        ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \
                .type = _type, \
                .handler = _handler, \
        }

#endif  /* __IMAGE_H__ */