LXR uboot/include/configs/colibri

   1/*
   2 * Copyright 2013-2015 Toradex, Inc.
   3 *
   4 * Configuration settings for the Toradex Colibri iMX6
   5 *
   6 * SPDX-License-Identifier:     GPL-2.0+
   7 */
   8
   9#ifndef __CONFIG_H
  10#define __CONFIG_H
  11
  12#include "mx6_common.h"
  13
  14#undef CONFIG_DISPLAY_BOARDINFO
  15#define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17#define CONFIG_SYS_GENERIC_BOARD
  18
  19#include <asm/arch/imx-regs.h>
  20#include <asm/mach-imx/gpio.h>
  21
  22#ifdef CONFIG_SPL
  23#include "imx6_spl.h"
  24#endif
  25
  26#define CONFIG_CMDLINE_TAG
  27#define CONFIG_SETUP_MEMORY_TAGS
  28#define CONFIG_INITRD_TAG
  29#define CONFIG_REVISION_TAG
  30#define CONFIG_SERIAL_TAG
  31
  32/* Size of malloc() pool */
  33#define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  34
  35#define CONFIG_MISC_INIT_R
  36
  37#define CONFIG_MXC_UART
  38#define CONFIG_MXC_UART_BASE            UART1_BASE
  39
  40/* Make the HW version stuff available in U-Boot env */
  41#define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  42#define CONFIG_ENV_VARS_UBOOT_CONFIG
  43#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  44
  45/* I2C Configs */
  46#define CONFIG_SYS_I2C
  47#define CONFIG_SYS_I2C_MXC
  48#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  49#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  50#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  51#define CONFIG_SYS_I2C_SPEED            100000
  52
  53/* OCOTP Configs */
  54#ifdef CONFIG_CMD_FUSE
  55#define CONFIG_MXC_OCOTP
  56#endif
  57
  58/* MMC Configs */
  59#define CONFIG_FSL_ESDHC
  60#define CONFIG_FSL_USDHC
  61#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  62#define CONFIG_SYS_FSL_USDHC_NUM        2
  63
  64#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  65#define CONFIG_BOUNCE_BUFFER
  66
  67/* Network */
  68#define CONFIG_FEC_MXC
  69#define CONFIG_MII
  70#define IMX_FEC_BASE                    ENET_BASE_ADDR
  71#define CONFIG_FEC_XCV_TYPE             RMII
  72#define CONFIG_ETHPRIME                 "FEC"
  73#define CONFIG_FEC_MXC_PHYADDR          1
  74#define CONFIG_IP_DEFRAG
  75#define CONFIG_TFTP_BLOCKSIZE           16352
  76#define CONFIG_TFTP_TSIZE
  77
  78/* USB Configs */
  79/* Host */
  80#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  81#define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  82#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  83#define CONFIG_MXC_USB_FLAGS            0
  84/* Client */
  85#define CONFIG_USBD_HS
  86
  87#define CONFIG_USB_GADGET_MASS_STORAGE
  88#define CONFIG_USB_FUNCTION_MASS_STORAGE
  89/* USB DFU */
  90#define CONFIG_DFU_MMC
  91
  92/* Miscellaneous commands */
  93#define CONFIG_MXC_GPIO
  94
  95/* Framebuffer and LCD */
  96#define CONFIG_VIDEO_IPUV3
  97#define CONFIG_SYS_CONSOLE_IS_IN_ENV
  98#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  99#define CONFIG_VIDEO_BMP_RLE8
 100#define CONFIG_SPLASH_SCREEN
 101#define CONFIG_SPLASH_SCREEN_ALIGN
 102#define CONFIG_BMP_16BPP
 103#define CONFIG_VIDEO_LOGO
 104#define CONFIG_VIDEO_BMP_LOGO
 105#define CONFIG_CONSOLE_MUX
 106#define CONFIG_IMX_HDMI
 107#define CONFIG_IMX_VIDEO_SKIP
 108
 109/* allow to overwrite serial and ethaddr */
 110#define CONFIG_ENV_OVERWRITE
 111#define CONFIG_CONS_INDEX               1
 112
 113/* Command definition */
 114#undef CONFIG_CMD_LOADB
 115#undef CONFIG_CMD_LOADS
 116#undef CONFIG_CMD_NFS
 117#undef CONFIG_CMD_FLASH
 118
 119#undef CONFIG_IPADDR
 120#define CONFIG_IPADDR                   192.168.10.2
 121#define CONFIG_NETMASK                  255.255.255.0
 122#undef CONFIG_SERVERIP
 123#define CONFIG_SERVERIP                 192.168.10.1
 124
 125#define CONFIG_LOADADDR                 0x12000000
 126#define CONFIG_SYS_TEXT_BASE            0x17800000
 127
 128#ifdef CONFIG_CMD_MMC
 129#define CONFIG_DRIVE_MMC "mmc "
 130#else
 131#define CONFIG_DRIVE_MMC
 132#endif
 133
 134#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
 135
 136#define DFU_ALT_EMMC_INFO \
 137        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 138        "boot part 0 1;" \
 139        "rootfs part 0 2;" \
 140        "uImage fat 0 1;" \
 141        "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 142        "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 143
 144#define EMMC_BOOTCMD \
 145        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 146                "rootwait\0" \
 147        "emmcboot=run setup; " \
 148                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 149                "${vidargs}; echo Booting from internal eMMC chip...; " \
 150                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 151                "${boot_file} && run fdt_fixup && " \
 152                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 153        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 154                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 155
 156#define MEM_LAYOUT_ENV_SETTINGS \
 157        "bootm_size=0x10000000\0" \
 158        "fdt_addr_r=0x12000000\0" \
 159        "fdt_high=0xffffffff\0" \
 160        "initrd_high=0xffffffff\0" \
 161        "kernel_addr_r=0x11000000\0" \
 162        "ramdisk_addr_r=0x12100000\0"
 163
 164#define NFS_BOOTCMD \
 165        "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 166        "nfsboot=run setup; " \
 167                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 168                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 169                "run nfsdtbload; dhcp ${kernel_addr_r} " \
 170                "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 171        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 172                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 173
 174#define SD_BOOTCMD                                              \
 175        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 176                "rootwait\0" \
 177        "sdboot=run setup; " \
 178                "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 179                "${vidargs}; echo Booting from SD card; " \
 180                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 181                "${boot_file} && run fdt_fixup && " \
 182                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 183        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 184                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 185
 186#define USB_BOOTCMD \
 187        "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 188                "rootwait\0" \
 189        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 190                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 191                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 192                "${boot_file} && run fdt_fixup && " \
 193                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 194        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 195                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 196
 197#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 198#define CONFIG_EXTRA_ENV_SETTINGS \
 199        "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 200                "run nfsboot ; echo ; echo nfsboot failed ; " \
 201                "usb start ;" \
 202                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 203        "boot_file=uImage\0" \
 204        "console=ttymxc0\0" \
 205        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 206        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 207        EMMC_BOOTCMD \
 208        "fdt_file=" FDT_FILE "\0" \
 209        "fdt_fixup=;\0" \
 210        MEM_LAYOUT_ENV_SETTINGS \
 211        NFS_BOOTCMD \
 212        SD_BOOTCMD \
 213        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 214                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 215                "flash_eth.img && source ${loadaddr}\0" \
 216        "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 217                "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 218                "source ${loadaddr}\0" \
 219        "setup=setenv setupargs fec_mac=${ethaddr} " \
 220                "consoleblank=0 no_console_suspend=1 console=tty1 " \
 221                "console=${console},${baudrate}n8\0 " \
 222        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 223        "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 224                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 225                "source ${loadaddr}\0" \
 226        "splashpos=m,m\0" \
 227        "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
 228                "video=mxcfb1:off fbmem=8M\0 "
 229
 230/* Miscellaneous configurable options */
 231#define CONFIG_SYS_LONGHELP
 232#define CONFIG_AUTO_COMPLETE
 233#undef CONFIG_SYS_CBSIZE
 234#define CONFIG_SYS_CBSIZE               1024
 235#undef CONFIG_SYS_MAXARGS
 236#define CONFIG_SYS_MAXARGS              48
 237
 238#define CONFIG_SYS_ALT_MEMTEST
 239#define CONFIG_SYS_MEMTEST_START        0x10000000
 240#define CONFIG_SYS_MEMTEST_END          0x10010000
 241#define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 242
 243#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 244
 245#define CONFIG_CMDLINE_EDITING
 246
 247/* Physical Memory Map */
 248#define CONFIG_NR_DRAM_BANKS            1
 249#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 250
 251#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 252#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 253#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 254
 255#define CONFIG_SYS_INIT_SP_OFFSET \
 256        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257#define CONFIG_SYS_INIT_SP_ADDR \
 258        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 259
 260/* environment organization */
 261#define CONFIG_ENV_SIZE                 (8 * 1024)
 262
 263#if defined(CONFIG_ENV_IS_IN_MMC)
 264/* Environment in eMMC, before config block at the end of 1st "boot sector" */
 265#define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 266                                         CONFIG_TDX_CFG_BLOCK_OFFSET)
 267#define CONFIG_SYS_MMC_ENV_DEV          0
 268#define CONFIG_SYS_MMC_ENV_PART         1
 269#endif
 270
 271#define CONFIG_OF_SYSTEM_SETUP
 272
 273#define CONFIG_CMD_TIME
 274
 275#define CONFIG_SUPPORT_RAW_INITRD
 276
 277#endif  /* __CONFIG_H */
 278