1
2
3
4
5
6
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#include <config_distro_defaults.h>
12#include "mx6_common.h"
13
14#define CONFIG_SPL_LIBCOMMON_SUPPORT
15#include "imx6_spl.h"
16
17#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
18#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
19#define CONFIG_SPL_OS_BOOT
20#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000)
21#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000)
22#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K)
23#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
24
25
26
27
28
29
30#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
31#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
32#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
33#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
34#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb"
35
36
37#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
38
39#define CONFIG_BOARD_EARLY_INIT_F
40#define CONFIG_BOARD_LATE_INIT
41
42#define CONFIG_MXC_UART
43#define CONFIG_MXC_UART_BASE UART1_BASE
44
45#define CONFIG_SYS_MEMTEST_START 0x10000000
46#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
47
48#define CONFIG_MXC_SPI
49#define CONFIG_SF_DEFAULT_BUS 2
50#define CONFIG_SF_DEFAULT_CS 0
51#define CONFIG_SF_DEFAULT_SPEED 25000000
52#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
53
54
55#define CONFIG_SYS_I2C
56#define CONFIG_SYS_I2C_MXC
57#define CONFIG_SYS_I2C_MXC_I2C1
58#define CONFIG_SYS_I2C_MXC_I2C2
59#define CONFIG_SYS_I2C_SPEED 100000
60
61
62#define CONFIG_SYS_FSL_USDHC_NUM 2
63#define CONFIG_SYS_FSL_ESDHC_ADDR 0
64
65
66#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
67#define CONFIG_SYS_FLASH_PROTECTION
68#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
69#define CONFIG_SYS_FLASH_CFI
70#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
71#define CONFIG_SYS_FLASH_EMPTY_INFO
72#define CONFIG_FLASH_CFI_DRIVER
73#define CONFIG_FLASH_VERIFY
74
75
76#define CONFIG_FLASH_CFI_DRIVER
77#define CONFIG_FLASH_CFI_MTD
78#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
79#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
80#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
81
82
83#define CONFIG_MTD_DEVICE
84#define CONFIG_MTD_PARTITIONS
85
86
87#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
88#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
89#define CONFIG_MXC_USB_FLAGS 0
90
91
92#define CONFIG_FEC_MXC
93#define CONFIG_MII
94#define IMX_FEC_BASE ENET_BASE_ADDR
95#define CONFIG_FEC_XCV_TYPE RGMII
96#define CONFIG_ETHPRIME "FEC"
97#define CONFIG_FEC_MXC_PHYADDR 1
98
99#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
100#define CONFIG_EXTRA_ENV_SETTINGS \
101 "console=ttymxc0,115200 quiet\0" \
102 "fdtfile=imx6q-mccmon6.dtb\0" \
103 "fdt_high=0xffffffff\0" \
104 "initrd_high=0xffffffff\0" \
105 "boot_os=yes\0" \
106 "download_kernel=" \
107 "tftpboot ${kernel_addr} ${kernel_file};" \
108 "tftpboot ${fdt_addr} ${fdtfile};\0" \
109 "get_boot_medium=" \
110 "setenv boot_medium nor;" \
111 "setexpr.l _src_sbmr1 *0x020d8004;" \
112 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
113 "if test ${_b_medium} = 40; then " \
114 "setenv boot_medium sdcard;" \
115 "fi\0" \
116 "kernel_file=uImage\0" \
117 "load_kernel=" \
118 "load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \
119 "load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \
120 "boot_sd=" \
121 "echo '#######################';" \
122 "echo '# Factory SDcard Boot #';" \
123 "echo '#######################';" \
124 "setenv mmcdev 1;" \
125 "setenv mmcfactorydev 0;" \
126 "setenv mmcfactorypart 1;" \
127 "run factory_flash_img;\0" \
128 "boot_nor=" \
129 "setenv kernelnor 0x08180000;" \
130 "setenv dtbnor 0x09980000;" \
131 "setenv bootargs console=${console} " \
132 CONFIG_MTDPARTS_DEFAULT " " \
133 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
134 "cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \
135 "bootm ${kernelnor} - ${dtbloadaddr};\0" \
136 "boot_recovery=" \
137 "echo '#######################';" \
138 "echo '# RECOVERY SWU Boot #';" \
139 "echo '#######################';" \
140 "setenv rootfsloadaddr 0x13000000;" \
141 "setenv swukernelnor 0x08980000;" \
142 "setenv swurootfsnor 0x09180000;" \
143 "setenv swudtbnor 0x099A0000;" \
144 "setenv bootargs console=${console} " \
145 CONFIG_MTDPARTS_DEFAULT " " \
146 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
147 ":${hostname}::off root=/dev/ram rw;" \
148 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
149 "cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \
150 "bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \
151 "boot_tftp=" \
152 "echo '#######################';" \
153 "echo '# TFTP Boot #';" \
154 "echo '#######################';" \
155 "if run download_kernel; then " \
156 "setenv bootargs console=${console} " \
157 "root=/dev/mmcblk0p2 rootwait;" \
158 "bootm ${kernel_addr} - ${fdt_addr};" \
159 "fi\0" \
160 "bootcmd=" \
161 "if test -n ${recovery_status}; then " \
162 "run boot_recovery;" \
163 "else " \
164 "if test ! -n ${boot_medium}; then " \
165 "run get_boot_medium;" \
166 "if test ${boot_medium} = sdcard; then " \
167 "run boot_sd;" \
168 "else " \
169 "run boot_nor;" \
170 "fi;" \
171 "else " \
172 "if test ${boot_medium} = tftp; then " \
173 "run boot_tftp;" \
174 "fi;" \
175 "fi;" \
176 "fi\0" \
177 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
178 "fdt_addr=0x18000000\0" \
179 "bootdev=1\0" \
180 "bootpart=1\0" \
181 "kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \
182 "netdev=eth0\0" \
183 "load_addr=0x11000000\0" \
184 "dtbloadaddr=0x12000000\0" \
185 "uboot_file=u-boot.img\0" \
186 "SPL_file=SPL\0" \
187 "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
188 "nor_img_addr=0x11000000\0" \
189 "nor_img_file=core-image-lwn-mccmon6.nor\0" \
190 "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
191 "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
192 "nor_img_size=0x02000000\0" \
193 "factory_script_file=factory.scr\0" \
194 "factory_load_script=" \
195 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
196 "${factory_script_file}; then " \
197 "load mmc ${mmcdev}:${mmcfactorypart} " \
198 "${loadaddr} ${factory_script_file};" \
199 "fi\0" \
200 "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
201 "source ${loadaddr}\0" \
202 "factory_flash_img="\
203 "echo 'Flash mccmon6 with factory images'; " \
204 "if run factory_load_script; then " \
205 "run factory_script;" \
206 "else " \
207 "echo No factory script: ${factory_script_file} found on " \
208 "device ${mmcdev};" \
209 "run factory_nor_img;" \
210 "run factory_eMMC_img;" \
211 "fi\0" \
212 "factory_eMMC_img="\
213 "echo 'Update mccmon6 eMMC image'; " \
214 "if load mmc ${mmcdev}:${mmcfactorypart} " \
215 "${loadaddr} ${emmc_img_file}; then " \
216 "setexpr fw_sz ${filesize} / 0x200;" \
217 "setexpr fw_sz ${fw_sz} + 1;" \
218 "mmc dev ${mmcfactorydev};" \
219 "mmc write ${loadaddr} 0x0 ${fw_sz};" \
220 "fi\0" \
221 "factory_nor_img="\
222 "echo 'Update mccmon6 NOR image'; " \
223 "if load mmc ${mmcdev}:${mmcfactorypart} " \
224 "${nor_img_addr} ${nor_img_file}; then " \
225 "run nor_update;" \
226 "fi\0" \
227 "nor_update=" \
228 "protect off ${nor_bank_start} +${nor_img_size};" \
229 "erase ${nor_bank_start} +${nor_img_size};" \
230 "setexpr nor_img_size ${nor_img_size} / 4; " \
231 "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
232 "tftp_nor_uboot="\
233 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
234 "setenv nor_img_file u-boot.img; " \
235 "setenv nor_img_size 0x80000; " \
236 "setenv nor_bank_start 0x08080000; " \
237 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
238 "run nor_update;" \
239 "fi\0" \
240 "tftp_nor_uImg="\
241 "echo 'Update mccmon6 NOR uImage via TFTP'; " \
242 "setenv nor_img_file uImage; " \
243 "setenv nor_img_size 0x500000; " \
244 "setenv nor_bank_start 0x08180000; " \
245 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
246 "run nor_update;" \
247 "fi\0" \
248 "tftp_nor_dtb="\
249 "echo 'Update mccmon6 NOR DTB via TFTP'; " \
250 "setenv nor_img_file imx6q-mccmon6.dtb; " \
251 "setenv nor_img_size 0x20000; " \
252 "setenv nor_bank_start 0x09980000; " \
253 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
254 "run nor_update;" \
255 "fi\0" \
256 "tftp_nor_img="\
257 "echo 'Update mccmon6 NOR image via TFTP'; " \
258 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
259 "run nor_update;" \
260 "fi\0" \
261 "tftp_nor_SPL="\
262 "if tftp ${load_addr} SPL_padded; then " \
263 "erase 0x08000000 +0x20000;" \
264 "cp.b ${load_addr} 0x08000000 0x20000;" \
265 "fi;\0" \
266 "tftp_sd_SPL="\
267 "if mmc dev 1; then " \
268 "if tftp ${load_addr} ${SPL_file}; then " \
269 "setexpr fw_sz ${filesize} / 0x200; " \
270 "setexpr fw_sz ${fw_sz} + 1; " \
271 "mmc write ${load_addr} 0x2 ${fw_sz};" \
272 "fi;" \
273 "fi;\0" \
274 "tftp_sd_uboot="\
275 "if mmc dev 1; then " \
276 "if run load_uboot; then " \
277 "setexpr fw_sz ${filesize} / 0x200; " \
278 "setexpr fw_sz ${fw_sz} + 1; " \
279 "mmc write ${load_addr} 0x8A ${fw_sz};" \
280 "fi;" \
281 "fi;\0"
282
283
284#define CONFIG_NR_DRAM_BANKS 1
285#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
286
287#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
288#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
289#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
290
291#define CONFIG_SYS_INIT_SP_OFFSET \
292 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
293#define CONFIG_SYS_INIT_SP_ADDR \
294 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
295
296
297#define CONFIG_ENV_SIZE (SZ_128K)
298
299
300#define CONFIG_ENV_SECT_SIZE (SZ_128K)
301#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
302
303#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
304#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x60000)
305#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
306
307#endif
308
