1/* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * Ilko Iliev <www.ronetix.at> 6 * 7 * Configuation settings for the RONETIX PM9261 board. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12#ifndef __CONFIG_H 13#define __CONFIG_H 14 15/* 16 * SoC must be defined first, before hardware.h is included. 17 * In this case SoC is defined in boards.cfg. 18 */ 19 20#include <asm/hardware.h> 21/* ARM asynchronous clock */ 22 23#define MASTER_PLL_DIV 15 24#define MASTER_PLL_MUL 162 25#define MAIN_PLL_DIV 2 26#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 27#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 28 29#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" 30#define CONFIG_ARCH_CPU_INIT 31 32#define CONFIG_MACH_TYPE MACH_TYPE_PM9261 33 34/* clocks */ 35/* CKGR_MOR - enable main osc. */ 36#define CONFIG_SYS_MOR_VAL \ 37 (AT91_PMC_MOR_MOSCEN | \ 38 (255 << 8)) /* Main Oscillator Start-up Time */ 39#define CONFIG_SYS_PLLAR_VAL \ 40 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ 41 AT91_PMC_PLLXR_OUT(3) | \ 42 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) 43 44/* PCK/2 = MCK Master Clock from PLLA */ 45#define CONFIG_SYS_MCKR1_VAL \ 46 (AT91_PMC_MCKR_CSS_SLOW | \ 47 AT91_PMC_MCKR_PRES_1 | \ 48 AT91_PMC_MCKR_MDIV_2) 49 50/* PCK/2 = MCK Master Clock from PLLA */ 51#define CONFIG_SYS_MCKR2_VAL \ 52 (AT91_PMC_MCKR_CSS_PLLA | \ 53 AT91_PMC_MCKR_PRES_1 | \ 54 AT91_PMC_MCKR_MDIV_2) 55 56/* define PDC[31:16] as DATA[31:16] */ 57#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 58/* no pull-up for D[31:16] */ 59#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 60 61/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ 62#define CONFIG_SYS_MATRIX_EBICSA_VAL \ 63 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) 64 65/* SDRAM */ 66/* SDRAMC_MR Mode register */ 67#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL 68/* SDRAMC_TR - Refresh Timer register */ 69#define CONFIG_SYS_SDRC_TR_VAL1 0x13C 70/* SDRAMC_CR - Configuration register*/ 71#define CONFIG_SYS_SDRC_CR_VAL \ 72 (AT91_SDRAMC_NC_9 | \ 73 AT91_SDRAMC_NR_13 | \ 74 AT91_SDRAMC_NB_4 | \ 75 AT91_SDRAMC_CAS_3 | \ 76 AT91_SDRAMC_DBW_32 | \ 77 (1 << 8) | /* Write Recovery Delay */ \ 78 (7 << 12) | /* Row Cycle Delay */ \ 79 (3 << 16) | /* Row Precharge Delay */ \ 80 (2 << 20) | /* Row to Column Delay */ \ 81 (5 << 24) | /* Active to Precharge Delay */ \ 82 (1 << 28)) /* Exit Self Refresh to Active Delay */ 83 84/* Memory Device Register -> SDRAM */ 85#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 86#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 87#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 88#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 89#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 90#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 91#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 92#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 93#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 94#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 95#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 96#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 97#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 98#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 99#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 100#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 101#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 102#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 103 104/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 105#define CONFIG_SYS_SMC0_SETUP0_VAL \ 106 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 107 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 108#define CONFIG_SYS_SMC0_PULSE0_VAL \ 109 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 110 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 111#define CONFIG_SYS_SMC0_CYCLE0_VAL \ 112 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 113#define CONFIG_SYS_SMC0_MODE0_VAL \ 114 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 115 AT91_SMC_MODE_DBW_16 | \ 116 AT91_SMC_MODE_TDF | \ 117 AT91_SMC_MODE_TDF_CYCLE(6)) 118 119/* user reset enable */ 120#define CONFIG_SYS_RSTC_RMR_VAL \ 121 (AT91_RSTC_KEY | \ 122 AT91_RSTC_CR_PROCRST | \ 123 AT91_RSTC_MR_ERSTL(1) | \ 124 AT91_RSTC_MR_ERSTL(2)) 125 126/* Disable Watchdog */ 127#define CONFIG_SYS_WDTC_WDMR_VAL \ 128 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 129 AT91_WDT_MR_WDV(0xfff) | \ 130 AT91_WDT_MR_WDDIS | \ 131 AT91_WDT_MR_WDD(0xfff)) 132 133#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 134#define CONFIG_SETUP_MEMORY_TAGS 1 135#define CONFIG_INITRD_TAG 1 136 137#undef CONFIG_SKIP_LOWLEVEL_INIT 138 139/* 140 * Hardware drivers 141 */ 142 143/* LCD */ 144#define LCD_BPP LCD_COLOR8 145#define CONFIG_LCD_LOGO 1 146#undef LCD_TEST_PATTERN 147#define CONFIG_LCD_INFO 1 148#define CONFIG_LCD_INFO_BELOW_LOGO 1 149#define CONFIG_ATMEL_LCD 1 150#define CONFIG_ATMEL_LCD_BGR555 1 151 152/* 153 * BOOTP options 154 */ 155#define CONFIG_BOOTP_BOOTFILESIZE 1 156 157/* SDRAM */ 158#define CONFIG_NR_DRAM_BANKS 1 159#define PHYS_SDRAM 0x20000000 160#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 161 162/* NAND flash */ 163#define CONFIG_NAND_ATMEL 164#define CONFIG_SYS_MAX_NAND_DEVICE 1 165#define CONFIG_SYS_NAND_BASE 0x40000000 166#define CONFIG_SYS_NAND_DBW_8 1 167/* our ALE is AD22 */ 168#define CONFIG_SYS_NAND_MASK_ALE (1 << 22) 169/* our CLE is AD21 */ 170#define CONFIG_SYS_NAND_MASK_CLE (1 << 21) 171#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 172#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16) 173 174/* NOR flash */ 175#define CONFIG_SYS_FLASH_CFI 1 176#define CONFIG_FLASH_CFI_DRIVER 1 177#define PHYS_FLASH_1 0x10000000 178#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 179#define CONFIG_SYS_MAX_FLASH_SECT 256 180#define CONFIG_SYS_MAX_FLASH_BANKS 1 181 182/* Ethernet */ 183#define CONFIG_DRIVER_DM9000 1 184#define CONFIG_DM9000_BASE 0x30000000 185#define DM9000_IO CONFIG_DM9000_BASE 186#define DM9000_DATA (CONFIG_DM9000_BASE + 4) 187#define CONFIG_DM9000_USE_16BIT 1 188#define CONFIG_NET_RETRY_COUNT 20 189#define CONFIG_RESET_PHY_R 1 190 191/* USB */ 192#define CONFIG_USB_ATMEL 193#define CONFIG_USB_ATMEL_CLK_SEL_PLLB 194#define CONFIG_USB_OHCI_NEW 1 195#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 196#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 197#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" 198#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 199 200#define CONFIG_SYS_LOAD_ADDR 0x22000000 201 202#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 203#define CONFIG_SYS_MEMTEST_END 0x23e00000 204 205#undef CONFIG_SYS_USE_DATAFLASH_CS0 206#undef CONFIG_SYS_USE_NANDFLASH 207#define CONFIG_SYS_USE_FLASH 1 208 209#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 210 211/* bootstrap + u-boot + env + linux in dataflash on CS0 */ 212#define CONFIG_ENV_OFFSET 0x4200 213#define CONFIG_ENV_SIZE 0x4200 214#define CONFIG_ENV_SECT_SIZE 0x210 215#define CONFIG_ENV_SPI_MAX_HZ 15000000 216#define CONFIG_BOOTCOMMAND "sf probe 0; " \ 217 "sf read 0x22000000 0x84000 0x210000; " \ 218 "bootm 0x22000000" 219 220#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ 221 222/* bootstrap + u-boot + env + linux in nandflash */ 223#define CONFIG_ENV_OFFSET 0x60000 224#define CONFIG_ENV_OFFSET_REDUND 0x80000 225#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 226#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 227 228#elif defined (CONFIG_SYS_USE_FLASH) 229 230#define CONFIG_ENV_OFFSET 0x40000 231#define CONFIG_ENV_SECT_SIZE 0x10000 232#define CONFIG_ENV_SIZE 0x10000 233#define CONFIG_ENV_OVERWRITE 1 234 235/* JFFS Partition offset set */ 236#define CONFIG_SYS_JFFS2_FIRST_BANK 0 237#define CONFIG_SYS_JFFS2_NUM_BANKS 1 238 239/* 512k reserved for u-boot */ 240#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 241 242#define CONFIG_BOOTCOMMAND "run flashboot" 243 244#define CONFIG_CON_ROT "fbcon=rotate:3 " 245 246#define CONFIG_EXTRA_ENV_SETTINGS \ 247 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ 248 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ 249 "partition=nand0,0\0" \ 250 "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ 251 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 252 CONFIG_CON_ROT \ 253 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ 254 "addip=setenv bootargs $(bootargs) " \ 255 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ 256 ":$(hostname):eth0:off\0" \ 257 "ramboot=tftpboot 0x22000000 vmImage;" \ 258 "run ramargs;run addip;bootm 22000000\0" \ 259 "nfsboot=tftpboot 0x22000000 vmImage;" \ 260 "run nfsargs;run addip;bootm 22000000\0" \ 261 "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ 262 "" 263#else 264#error "Undefined memory device" 265#endif 266 267/* 268 * Size of malloc() pool 269 */ 270#define CONFIG_SYS_MALLOC_LEN \ 271 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) 272 273#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 274#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ 275 GENERATED_GBL_DATA_SIZE) 276 277#endif 278