LXR uboot/include/configs/colibri

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright 2013-2015 Toradex, Inc.
   4 *
   5 * Configuration settings for the Toradex Colibri iMX6
   6 */
   7
   8#ifndef __CONFIG_H
   9#define __CONFIG_H
  10
  11#include "mx6_common.h"
  12
  13#undef CONFIG_DISPLAY_BOARDINFO
  14
  15#define CONFIG_SYS_GENERIC_BOARD
  16
  17#include <asm/arch/imx-regs.h>
  18#include <asm/mach-imx/gpio.h>
  19
  20#ifdef CONFIG_SPL
  21#include "imx6_spl.h"
  22#endif
  23
  24#define CONFIG_CMDLINE_TAG
  25#define CONFIG_SETUP_MEMORY_TAGS
  26#define CONFIG_INITRD_TAG
  27#define CONFIG_REVISION_TAG
  28#define CONFIG_SERIAL_TAG
  29
  30/* Size of malloc() pool */
  31#define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  32
  33#define CONFIG_MISC_INIT_R
  34
  35#define CONFIG_MXC_UART
  36#define CONFIG_MXC_UART_BASE            UART1_BASE
  37
  38/* I2C Configs */
  39#define CONFIG_SYS_I2C
  40#define CONFIG_SYS_I2C_MXC
  41#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44#define CONFIG_SYS_I2C_SPEED            100000
  45
  46/* OCOTP Configs */
  47#ifdef CONFIG_CMD_FUSE
  48#define CONFIG_MXC_OCOTP
  49#endif
  50
  51/* MMC Configs */
  52#define CONFIG_FSL_USDHC
  53#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  54#define CONFIG_SYS_FSL_USDHC_NUM        2
  55
  56#define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  57
  58/* Network */
  59#define CONFIG_FEC_MXC
  60#define CONFIG_MII
  61#define IMX_FEC_BASE                    ENET_BASE_ADDR
  62#define CONFIG_FEC_XCV_TYPE             RMII
  63#define CONFIG_ETHPRIME                 "FEC"
  64#define CONFIG_FEC_MXC_PHYADDR          1
  65#define CONFIG_IP_DEFRAG
  66#define CONFIG_TFTP_BLOCKSIZE           16352
  67#define CONFIG_TFTP_TSIZE
  68
  69/* USB Configs */
  70/* Host */
  71#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  72#define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  73#define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  74#define CONFIG_MXC_USB_FLAGS            0
  75/* Client */
  76#define CONFIG_USBD_HS
  77
  78#define CONFIG_USB_GADGET_MASS_STORAGE
  79/* USB DFU */
  80#define CONFIG_DFU_MMC
  81
  82/* Miscellaneous commands */
  83
  84/* Framebuffer and LCD */
  85#define CONFIG_VIDEO_IPUV3
  86#define CONFIG_SYS_CONSOLE_IS_IN_ENV
  87#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  88#define CONFIG_VIDEO_BMP_RLE8
  89#define CONFIG_SPLASH_SCREEN
  90#define CONFIG_SPLASH_SCREEN_ALIGN
  91#define CONFIG_BMP_16BPP
  92#define CONFIG_VIDEO_LOGO
  93#define CONFIG_VIDEO_BMP_LOGO
  94#define CONFIG_CONSOLE_MUX
  95#define CONFIG_IMX_HDMI
  96#define CONFIG_IMX_VIDEO_SKIP
  97
  98/* allow to overwrite serial and ethaddr */
  99#define CONFIG_ENV_OVERWRITE
 100
 101/* Command definition */
 102#undef CONFIG_CMD_LOADB
 103#undef CONFIG_CMD_LOADS
 104#undef CONFIG_CMD_NFS
 105#undef CONFIG_CMD_FLASH
 106
 107#undef CONFIG_IPADDR
 108#define CONFIG_IPADDR                   192.168.10.2
 109#define CONFIG_NETMASK                  255.255.255.0
 110#undef CONFIG_SERVERIP
 111#define CONFIG_SERVERIP                 192.168.10.1
 112
 113#define CONFIG_LOADADDR                 0x12000000
 114
 115#ifdef CONFIG_CMD_MMC
 116#define CONFIG_DRIVE_MMC "mmc "
 117#else
 118#define CONFIG_DRIVE_MMC
 119#endif
 120
 121#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
 122
 123#define DFU_ALT_EMMC_INFO \
 124        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 125        "boot part 0 1;" \
 126        "rootfs part 0 2;" \
 127        "uImage fat 0 1;" \
 128        "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 129        "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 130
 131#define EMMC_BOOTCMD \
 132        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 133                "rootwait\0" \
 134        "emmcboot=run setup; " \
 135                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 136                "${vidargs}; echo Booting from internal eMMC chip...; " \
 137                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 138                "${boot_file} && run fdt_fixup && " \
 139                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 140        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 141                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 142
 143#define MEM_LAYOUT_ENV_SETTINGS \
 144        "bootm_size=0x10000000\0" \
 145        "fdt_addr_r=0x12000000\0" \
 146        "fdt_high=0xffffffff\0" \
 147        "initrd_high=0xffffffff\0" \
 148        "kernel_addr_r=0x11000000\0" \
 149        "ramdisk_addr_r=0x12100000\0"
 150
 151#define NFS_BOOTCMD \
 152        "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 153        "nfsboot=run setup; " \
 154                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 155                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 156                "run nfsdtbload; dhcp ${kernel_addr_r} " \
 157                "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 158        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 159                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 160
 161#define SD_BOOTCMD                                              \
 162        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 163                "rootwait\0" \
 164        "sdboot=run setup; " \
 165                "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 166                "${vidargs}; echo Booting from SD card; " \
 167                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 168                "${boot_file} && run fdt_fixup && " \
 169                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 170        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 171                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 172
 173#define USB_BOOTCMD \
 174        "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 175                "rootwait\0" \
 176        "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 177                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 178                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 179                "${boot_file} && run fdt_fixup && " \
 180                "bootm ${kernel_addr_r} ${dtbparam}\0" \
 181        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 182                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 183
 184#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 185#define CONFIG_EXTRA_ENV_SETTINGS \
 186        "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 187                "run nfsboot ; echo ; echo nfsboot failed ; " \
 188                "usb start ;" \
 189                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 190        "boot_file=uImage\0" \
 191        "console=ttymxc0\0" \
 192        "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 193        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 194        EMMC_BOOTCMD \
 195        "fdt_file=" FDT_FILE "\0" \
 196        "fdt_fixup=;\0" \
 197        MEM_LAYOUT_ENV_SETTINGS \
 198        NFS_BOOTCMD \
 199        SD_BOOTCMD \
 200        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 201                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 202                "flash_eth.img && source ${loadaddr}\0" \
 203        "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 204                "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 205                "source ${loadaddr}\0" \
 206        "setup=setenv setupargs fec_mac=${ethaddr} " \
 207                "consoleblank=0 no_console_suspend=1 console=tty1 " \
 208                "console=${console},${baudrate}n8\0 " \
 209        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 210        "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 211                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 212                "source ${loadaddr}\0" \
 213        "splashpos=m,m\0" \
 214        "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
 215                "video=mxcfb1:off fbmem=8M\0 "
 216
 217/* Miscellaneous configurable options */
 218#undef CONFIG_SYS_CBSIZE
 219#define CONFIG_SYS_CBSIZE               1024
 220#undef CONFIG_SYS_MAXARGS
 221#define CONFIG_SYS_MAXARGS              48
 222
 223#define CONFIG_SYS_MEMTEST_START        0x10000000
 224#define CONFIG_SYS_MEMTEST_END          0x10010000
 225#define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 226
 227#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 228
 229/* Physical Memory Map */
 230#define CONFIG_NR_DRAM_BANKS            1
 231#define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 232
 233#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 234#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 235#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 236
 237#define CONFIG_SYS_INIT_SP_OFFSET \
 238        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 239#define CONFIG_SYS_INIT_SP_ADDR \
 240        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 241
 242/* environment organization */
 243#define CONFIG_ENV_SIZE                 (8 * 1024)
 244
 245#if defined(CONFIG_ENV_IS_IN_MMC)
 246/* Environment in eMMC, before config block at the end of 1st "boot sector" */
 247#define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 248                                         CONFIG_TDX_CFG_BLOCK_OFFSET)
 249#define CONFIG_SYS_MMC_ENV_DEV          0
 250#define CONFIG_SYS_MMC_ENV_PART         1
 251#endif
 252
 253#define CONFIG_OF_SYSTEM_SETUP
 254
 255#define CONFIG_CMD_TIME
 256
 257#endif  /* __CONFIG_H */
 258