LXR uboot/include/configs/dreamplug.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * (C) Copyright 2011
   4 * Jason Cooper <u-boot@lakedaemon.net>
   5 *
   6 * Based on work by:
   7 * Marvell Semiconductor <www.marvell.com>
   8 * Written-by: Siddarth Gore <gores@marvell.com>
   9 */
  10
  11#ifndef _CONFIG_DREAMPLUG_H
  12#define _CONFIG_DREAMPLUG_H
  13
  14/*
  15 * High Level Configuration Options (easy to change)
  16 */
  17#define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  18#define CONFIG_MACH_TYPE        MACH_TYPE_DREAMPLUG
  19
  20/*
  21 * Commands configuration
  22 */
  23
  24/*
  25 * mv-plug-common.h should be defined after CMD configs since it used them
  26 * to enable certain macros
  27 */
  28#include "mv-plug-common.h"
  29
  30/*
  31 *  Environment variables configurations
  32 */
  33#ifdef CONFIG_SPI_FLASH
  34#define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  35#endif
  36
  37#ifdef CONFIG_CMD_SF
  38#define CONFIG_HARD_SPI                 1
  39#define CONFIG_ENV_SPI_BUS              0
  40#define CONFIG_ENV_SPI_CS               0
  41#define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  42#endif
  43
  44/*
  45 * max 4k env size is enough, but in case of nand
  46 * it has to be rounded to sector size
  47 */
  48#define CONFIG_ENV_SIZE                 0x1000  /* 4k */
  49#define CONFIG_ENV_ADDR                 0x100000
  50#define CONFIG_ENV_OFFSET               0x100000 /* env starts here */
  51
  52/*
  53 * Default environment variables
  54 */
  55#define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  56        "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  57        "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  58        "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  59        "bootm 0x6400000;"
  60
  61#define CONFIG_EXTRA_ENV_SETTINGS       \
  62        "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  63        "x_bootcmd_usb=usb start\0"     \
  64        "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  65        "x_bootargs=console=ttyS0,115200\0"     \
  66        "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
  67
  68/*
  69 * Ethernet Driver configuration
  70 */
  71#ifdef CONFIG_CMD_NET
  72#define CONFIG_MVGBE_PORTS      {1, 1}  /* enable both ports */
  73#define CONFIG_PHY_BASE_ADR     0
  74#endif /* CONFIG_CMD_NET */
  75
  76/*
  77 * SATA Driver configuration
  78 */
  79#ifdef CONFIG_MVSATA_IDE
  80#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  81#endif /*CONFIG_MVSATA_IDE*/
  82
  83#endif /* _CONFIG_DREAMPLUG_H */
  84