LXR uboot/include/configs/sniper.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * LG Optimus Black codename sniper config
   4 *
   5 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
   6 */
   7
   8#ifndef __CONFIG_H
   9#define __CONFIG_H
  10
  11#include <asm/arch/cpu.h>
  12#include <asm/arch/omap.h>
  13
  14/*
  15 * CPU
  16 */
  17
  18#define CONFIG_ARM_ARCH_CP15_ERRATA
  19
  20/*
  21 * Board
  22 */
  23
  24#define CONFIG_MISC_INIT_R
  25
  26/*
  27 * Clocks
  28 */
  29
  30#define CONFIG_SYS_TIMERBASE    OMAP34XX_GPT2
  31#define CONFIG_SYS_PTV          2
  32
  33#define V_NS16550_CLK           48000000
  34#define V_OSCK                  26000000
  35#define V_SCLK                  (V_OSCK >> 1)
  36
  37/*
  38 * DRAM
  39 */
  40
  41#define CONFIG_NR_DRAM_BANKS    2
  42#define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
  43#define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
  44
  45/*
  46 * Memory
  47 */
  48
  49#define CONFIG_SYS_SDRAM_BASE           0x80000000
  50#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  51                                         GENERATED_GBL_DATA_SIZE)
  52
  53#define CONFIG_SYS_MALLOC_LEN           (1024 * 1024 + CONFIG_ENV_SIZE)
  54
  55/*
  56 * I2C
  57 */
  58
  59#define CONFIG_SYS_I2C
  60#define CONFIG_I2C_MULTI_BUS
  61
  62/*
  63 * Input
  64 */
  65
  66#define CONFIG_TWL4030_INPUT
  67
  68/*
  69 * SPL
  70 */
  71
  72#define CONFIG_SPL_TEXT_BASE            0x40200000
  73#define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  74                                         CONFIG_SPL_TEXT_BASE)
  75#define CONFIG_SPL_BSS_START_ADDR       0x80000000
  76#define CONFIG_SPL_BSS_MAX_SIZE         (512 * 1024)
  77#define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  78#define CONFIG_SYS_SPL_MALLOC_SIZE      (1024 * 1024)
  79#define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
  80
  81#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION              1
  82#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                 "u-boot.img"
  83
  84#define CONFIG_SYS_CBSIZE       512
  85
  86/*
  87 * Serial
  88 */
  89
  90#ifdef CONFIG_SPL_BUILD
  91#define CONFIG_SYS_NS16550_SERIAL
  92#define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  93#endif
  94
  95#define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  96#define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  97
  98#define CONFIG_SYS_BAUDRATE_TABLE       { 4800, 9600, 19200, 38400, 57600, \
  99                                          115200 }
 100
 101/*
 102 * Environment
 103 */
 104
 105#define CONFIG_ENV_SIZE         (128 * 1024)
 106
 107#define CONFIG_ENV_OVERWRITE
 108
 109#define CONFIG_EXTRA_ENV_SETTINGS \
 110        "kernel_addr_r=0x82000000\0" \
 111        "loadaddr=0x82000000\0" \
 112        "fdt_addr_r=0x88000000\0" \
 113        "fdtaddr=0x88000000\0" \
 114        "ramdisk_addr_r=0x88080000\0" \
 115        "pxefile_addr_r=0x80100000\0" \
 116        "scriptaddr=0x80000000\0" \
 117        "bootm_size=0x10000000\0" \
 118        "boot_mmc_dev=0\0" \
 119        "kernel_mmc_part=3\0" \
 120        "recovery_mmc_part=4\0" \
 121        "fdtfile=omap3-sniper.dtb\0" \
 122        "bootfile=/boot/extlinux/extlinux.conf\0" \
 123        "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
 124
 125/*
 126 * ATAGs
 127 */
 128
 129#define CONFIG_SETUP_MEMORY_TAGS
 130#define CONFIG_CMDLINE_TAG
 131#define CONFIG_INITRD_TAG
 132#define CONFIG_REVISION_TAG
 133#define CONFIG_SERIAL_TAG
 134
 135/*
 136 * Boot
 137 */
 138
 139#define CONFIG_SYS_LOAD_ADDR    0x82000000
 140
 141#define CONFIG_BOOTCOMMAND \
 142        "setenv boot_mmc_part ${kernel_mmc_part}; " \
 143        "if test reboot-${reboot-mode} = reboot-r; then " \
 144        "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
 145        "if test reboot-${reboot-mode} = reboot-b; then " \
 146        "echo fastboot; fastboot 0; fi; " \
 147        "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
 148        "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
 149        "mmc dev ${boot_mmc_dev}; " \
 150        "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
 151        "bootm ${kernel_addr_r};"
 152
 153/*
 154 * Defaults
 155 */
 156
 157#include <config_defaults.h>
 158
 159#endif
 160