/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Based on Linux i.MX iomux-v3.h file:
 * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
 *                      <armlinux@phytec.de>
 *
 * Copyright (C) 2011 Freescale Semiconductor, Inc.
 */

#ifndef __MACH_IOMUX_V3_H__
#define __MACH_IOMUX_V3_H__

#include <common.h>

/*
 *      build IOMUX_PAD structure
 *
 * This iomux scheme is based around pads, which are the physical balls
 * on the processor.
 *
 * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
 *   things like driving strength and pullup/pulldown.
 * - Each pad can have but not necessarily does have an output routing register
 *   (IOMUXC_SW_MUX_CTL_PAD_x).
 * - Each pad can have but not necessarily does have an input routing register
 *   (IOMUXC_x_SELECT_INPUT)
 *
 * The three register sets do not have a fixed offset to each other,
 * hence we order this table by pad control registers (which all pads
 * have) and put the optional i/o routing registers into additional
 * fields.
 *
 * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
 * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
 *
 * IOMUX/PAD Bit field definitions
 *
 * MUX_CTRL_OFS:            0..11 (12)
 * PAD_CTRL_OFS:           12..23 (12)
 * SEL_INPUT_OFS:          24..35 (12)
 * MUX_MODE + SION + LPSR: 36..41  (6)
 * PAD_CTRL + NO_PAD_CTRL: 42..59 (18)
 * SEL_INP:                60..63  (4)
*/

typedef u64 iomux_v3_cfg_t;

#define MUX_CTRL_OFS_SHIFT      0
#define MUX_CTRL_OFS_MASK       ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
#define MUX_PAD_CTRL_OFS_SHIFT  12
#define MUX_PAD_CTRL_OFS_MASK   ((iomux_v3_cfg_t)0xfff << \
        MUX_PAD_CTRL_OFS_SHIFT)
#define MUX_SEL_INPUT_OFS_SHIFT 24
#define MUX_SEL_INPUT_OFS_MASK  ((iomux_v3_cfg_t)0xfff << \
        MUX_SEL_INPUT_OFS_SHIFT)

#define MUX_MODE_SHIFT          36
#define MUX_MODE_MASK           ((iomux_v3_cfg_t)0x3f << MUX_MODE_SHIFT)
#define MUX_PAD_CTRL_SHIFT      42
#define MUX_PAD_CTRL_MASK       ((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT)
#define MUX_SEL_INPUT_SHIFT     60
#define MUX_SEL_INPUT_MASK      ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)

#define MUX_MODE_SION           ((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \
        MUX_MODE_SHIFT)
#define MUX_PAD_CTRL(x)         ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)

#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs,  \
                sel_input, pad_ctrl)                                    \
        (((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT)     |   \
        ((iomux_v3_cfg_t)(mux_mode)      << MUX_MODE_SHIFT)         |   \
        ((iomux_v3_cfg_t)(pad_ctrl_ofs)  << MUX_PAD_CTRL_OFS_SHIFT) |   \
        ((iomux_v3_cfg_t)(pad_ctrl)      << MUX_PAD_CTRL_SHIFT)     |   \
        ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|   \
        ((iomux_v3_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))

#define NEW_PAD_CTRL(cfg, pad)  (((cfg) & ~MUX_PAD_CTRL_MASK) | \
                                        MUX_PAD_CTRL(pad))

#define __NA_                   0x000
#define NO_MUX_I                0
#define NO_PAD_I                0

#define NO_PAD_CTRL             (1 << 17)

#define IOMUX_CONFIG_LPSR       0x20
#define MUX_MODE_LPSR           ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \
                                MUX_MODE_SHIFT)
#ifdef CONFIG_MX8M
#define PAD_CTL_DSE0            (0x0 << 0)
#define PAD_CTL_DSE1            (0x1 << 0)
#define PAD_CTL_DSE2            (0x2 << 0)
#define PAD_CTL_DSE3            (0x3 << 0)
#define PAD_CTL_DSE4            (0x4 << 0)
#define PAD_CTL_DSE5            (0x5 << 0)
#define PAD_CTL_DSE6            (0x6 << 0)
#define PAD_CTL_DSE7            (0x7 << 0)

#define PAD_CTL_FSEL0           (0x0 << 3)
#define PAD_CTL_FSEL1           (0x1 << 3)
#define PAD_CTL_FSEL2           (0x2 << 3)
#define PAD_CTL_FSEL3           (0x3 << 3)

#define PAD_CTL_ODE             (0x1 << 5)
#define PAD_CTL_PUE             (0x1 << 6)
#define PAD_CTL_HYS             (0x1 << 7)
#define PAD_CTL_LVTTL           (0x1 << 8)

#elif defined CONFIG_MX7

#define IOMUX_LPSR_SEL_INPUT_OFS 0x70000

#define PAD_CTL_DSE_1P8V_140OHM   (0x0<<0)
#define PAD_CTL_DSE_1P8V_35OHM    (0x1<<0)
#define PAD_CTL_DSE_1P8V_70OHM    (0x2<<0)
#define PAD_CTL_DSE_1P8V_23OHM    (0x3<<0)

#define PAD_CTL_DSE_3P3V_196OHM   (0x0<<0)
#define PAD_CTL_DSE_3P3V_49OHM    (0x1<<0)
#define PAD_CTL_DSE_3P3V_98OHM    (0x2<<0)
#define PAD_CTL_DSE_3P3V_32OHM    (0x3<<0)

#define PAD_CTL_SRE_FAST     (0 << 2)
#define PAD_CTL_SRE_SLOW     (0x1 << 2)

#define PAD_CTL_HYS       (0x1 << 3)
#define PAD_CTL_PUE       (0x1 << 4)

#define PAD_CTL_PUS_PD100KOHM  ((0x0 << 5) | PAD_CTL_PUE)
#define PAD_CTL_PUS_PU5KOHM    ((0x1 << 5) | PAD_CTL_PUE)
#define PAD_CTL_PUS_PU47KOHM   ((0x2 << 5) | PAD_CTL_PUE)
#define PAD_CTL_PUS_PU100KOHM  ((0x3 << 5) | PAD_CTL_PUE)

#else

#ifdef CONFIG_MX6

#define PAD_CTL_HYS             (1 << 16)

#define PAD_CTL_PUS_100K_DOWN   (0 << 14 | PAD_CTL_PUE)
#define PAD_CTL_PUS_47K_UP      (1 << 14 | PAD_CTL_PUE)
#define PAD_CTL_PUS_100K_UP     (2 << 14 | PAD_CTL_PUE)
#define PAD_CTL_PUS_22K_UP      (3 << 14 | PAD_CTL_PUE)
#define PAD_CTL_PUE             (1 << 13 | PAD_CTL_PKE)
#define PAD_CTL_PKE             (1 << 12)

#define PAD_CTL_ODE             (1 << 11)

#if defined(CONFIG_MX6SL)
#define PAD_CTL_SPEED_LOW       (1 << 6)
#else
#define PAD_CTL_SPEED_LOW       (0 << 6)
#endif
#define PAD_CTL_SPEED_MED       (2 << 6)
#define PAD_CTL_SPEED_HIGH      (3 << 6)

#define PAD_CTL_DSE_DISABLE     (0 << 3)
#define PAD_CTL_DSE_240ohm      (1 << 3)
#define PAD_CTL_DSE_120ohm      (2 << 3)
#define PAD_CTL_DSE_80ohm       (3 << 3)
#define PAD_CTL_DSE_60ohm       (4 << 3)
#define PAD_CTL_DSE_48ohm       (5 << 3)
#define PAD_CTL_DSE_40ohm       (6 << 3)
#define PAD_CTL_DSE_34ohm       (7 << 3)

#define PAD_CTL_DSE_260ohm      (1 << 3)
#define PAD_CTL_DSE_130ohm      (2 << 3)
#define PAD_CTL_DSE_88ohm       (3 << 3)
#define PAD_CTL_DSE_65ohm       (4 << 3)
#define PAD_CTL_DSE_52ohm       (5 << 3)
#define PAD_CTL_DSE_43ohm       (6 << 3)
#define PAD_CTL_DSE_37ohm       (7 << 3)

/* i.MX6SL/SLL */
#define PAD_CTL_LVE             (1 << 1)
#define PAD_CTL_LVE_BIT         (1 << 22)

/* i.MX6SLL */
#define PAD_CTL_IPD_BIT         (1 << 27)

#elif defined(CONFIG_VF610)

#define PAD_MUX_MODE_SHIFT      20

#define PAD_CTL_INPUT_DIFFERENTIAL (1 << 16)

#define PAD_CTL_SPEED_MED       (1 << 12)
#define PAD_CTL_SPEED_HIGH      (3 << 12)

#define PAD_CTL_SRE             (1 << 11)

#define PAD_CTL_ODE             (1 << 10)

#define PAD_CTL_DSE_150ohm      (1 << 6)
#define PAD_CTL_DSE_75ohm       (2 << 6)
#define PAD_CTL_DSE_50ohm       (3 << 6)
#define PAD_CTL_DSE_37ohm       (4 << 6)
#define PAD_CTL_DSE_30ohm       (5 << 6)
#define PAD_CTL_DSE_25ohm       (6 << 6)
#define PAD_CTL_DSE_20ohm       (7 << 6)

#define PAD_CTL_PUS_47K_UP      (1 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_100K_UP     (2 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_22K_UP      (3 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PKE             (1 << 3)
#define PAD_CTL_PUE             (1 << 2 | PAD_CTL_PKE)

#define PAD_CTL_OBE_IBE_ENABLE  (3 << 0)
#define PAD_CTL_OBE_ENABLE      (1 << 1)
#define PAD_CTL_IBE_ENABLE      (1 << 0)

#else

#define PAD_CTL_DVS             (1 << 13)
#define PAD_CTL_INPUT_DDR       (1 << 9)
#define PAD_CTL_HYS             (1 << 8)

#define PAD_CTL_PKE             (1 << 7)
#define PAD_CTL_PUE             (1 << 6 | PAD_CTL_PKE)
#define PAD_CTL_PUS_100K_DOWN   (0 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_47K_UP      (1 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_100K_UP     (2 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_22K_UP      (3 << 4 | PAD_CTL_PUE)

#define PAD_CTL_ODE             (1 << 3)

#define PAD_CTL_DSE_LOW         (0 << 1)
#define PAD_CTL_DSE_MED         (1 << 1)
#define PAD_CTL_DSE_HIGH        (2 << 1)
#define PAD_CTL_DSE_MAX         (3 << 1)

#endif

#define PAD_CTL_SRE_SLOW        (0 << 0)
#define PAD_CTL_SRE_FAST        (1 << 0)

#endif

#define IOMUX_CONFIG_SION       0x10

#define GPIO_PIN_MASK           0x1f
#define GPIO_PORT_SHIFT         5
#define GPIO_PORT_MASK          (0x7 << GPIO_PORT_SHIFT)
#define GPIO_PORTA              (0 << GPIO_PORT_SHIFT)
#define GPIO_PORTB              (1 << GPIO_PORT_SHIFT)
#define GPIO_PORTC              (2 << GPIO_PORT_SHIFT)
#define GPIO_PORTD              (3 << GPIO_PORT_SHIFT)
#define GPIO_PORTE              (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF              (5 << GPIO_PORT_SHIFT)

void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
                                     unsigned count);
/*
* Set bits for general purpose registers
*/
void imx_iomux_set_gpr_register(int group, int start_bit,
                                         int num_bits, int value);
#ifdef CONFIG_IOMUX_SHARE_CONF_REG
void imx_iomux_gpio_set_direction(unsigned int gpio,
                                unsigned int direction);
void imx_iomux_gpio_get_function(unsigned int gpio,
                                u32 *gpio_state);
#endif

/* macros for declaring and using pinmux array */
#if defined(CONFIG_MX6QDL)
#define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x)
#define SETUP_IOMUX_PAD(def)                                    \
if (is_mx6dq() || is_mx6dqp()) {                                \
        imx_iomux_v3_setup_pad(MX6Q_##def);                     \
} else {                                                        \
        imx_iomux_v3_setup_pad(MX6DL_##def);                    \
}
#define SETUP_IOMUX_PADS(x)                                     \
        imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2)
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
#define IOMUX_PADS(x) MX6Q_##x
#define SETUP_IOMUX_PAD(def)                                    \
        imx_iomux_v3_setup_pad(MX6Q_##def);
#define SETUP_IOMUX_PADS(x)                                     \
        imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
#elif defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
#define IOMUX_PADS(x) MX6_##x
#define SETUP_IOMUX_PAD(def)                                    \
        imx_iomux_v3_setup_pad(MX6_##def);
#define SETUP_IOMUX_PADS(x)                                     \
        imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
#else
#define IOMUX_PADS(x) MX6DL_##x
#define SETUP_IOMUX_PAD(def)                                    \
        imx_iomux_v3_setup_pad(MX6DL_##def);
#define SETUP_IOMUX_PADS(x)                                     \
        imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
#endif

#endif  /* __MACH_IOMUX_V3_H__*/