LXR uboot/board/technexion/twister/twister.c

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * Copyright (C) 2011
   4 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
   5 *
   6 * Copyright (C) 2009 TechNexion Ltd.
   7 */
   8
   9#include <common.h>
  10#include <netdev.h>
  11#include <asm/io.h>
  12#include <asm/arch/mem.h>
  13#include <asm/arch/mux.h>
  14#include <asm/arch/sys_proto.h>
  15#include <asm/omap_gpio.h>
  16#include <asm/arch/mmc_host_def.h>
  17#include <i2c.h>
  18#include <spl.h>
  19#include <mmc.h>
  20#include <asm/gpio.h>
  21#include <usb.h>
  22#include <asm/ehci-omap.h>
  23#include "twister.h"
  24
  25DECLARE_GLOBAL_DATA_PTR;
  26
  27/* Timing definitions for Ethernet Controller */
  28static const u32 gpmc_smc911[] = {
  29        NET_GPMC_CONFIG1,
  30        NET_GPMC_CONFIG2,
  31        NET_GPMC_CONFIG3,
  32        NET_GPMC_CONFIG4,
  33        NET_GPMC_CONFIG5,
  34        NET_GPMC_CONFIG6,
  35};
  36
  37static const u32 gpmc_XR16L2751[] = {
  38        XR16L2751_GPMC_CONFIG1,
  39        XR16L2751_GPMC_CONFIG2,
  40        XR16L2751_GPMC_CONFIG3,
  41        XR16L2751_GPMC_CONFIG4,
  42        XR16L2751_GPMC_CONFIG5,
  43        XR16L2751_GPMC_CONFIG6,
  44};
  45
  46#ifdef CONFIG_USB_EHCI_OMAP
  47static struct omap_usbhs_board_data usbhs_bdata = {
  48        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
  49        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
  50        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
  51};
  52
  53int ehci_hcd_init(int index, enum usb_init_type init,
  54                struct ehci_hccr **hccr, struct ehci_hcor **hcor)
  55{
  56        return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
  57}
  58
  59int ehci_hcd_stop(int index)
  60{
  61        return omap_ehci_hcd_stop();
  62}
  63#endif
  64
  65int board_init(void)
  66{
  67        gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
  68
  69        /* boot param addr */
  70        gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
  71
  72        /* Chip select 1  and 3 are used for XR16L2751 UART controller */
  73        enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[1],
  74                XR16L2751_UART1_BASE, GPMC_SIZE_16M);
  75
  76        enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[3],
  77                XR16L2751_UART2_BASE, GPMC_SIZE_16M);
  78
  79        gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB_PHY1_RESET");
  80        gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, 1);
  81
  82        return 0;
  83}
  84
  85#ifndef CONFIG_SPL_BUILD
  86int misc_init_r(void)
  87{
  88        char *eth_addr;
  89        struct tam3517_module_info info;
  90        int ret;
  91
  92        omap_die_id_display();
  93
  94        eth_addr = env_get("ethaddr");
  95        if (eth_addr)
  96                return 0;
  97
  98        TAM3517_READ_EEPROM(&info, ret);
  99        if (!ret)
 100                TAM3517_READ_MAC_FROM_EEPROM(&info);
 101
 102        return 0;
 103}
 104#endif
 105
 106/*
 107 * Routine: set_muxconf_regs
 108 * Description: Setting up the configuration Mux registers specific to the
 109 *              hardware. Many pins need to be moved from protect to primary
 110 *              mode.
 111 */
 112void set_muxconf_regs(void)
 113{
 114        MUX_TWISTER();
 115}
 116
 117int board_eth_init(bd_t *bis)
 118{
 119#ifdef CONFIG_DRIVER_TI_EMAC
 120        davinci_emac_initialize();
 121#endif
 122        /* init cs for extern lan */
 123        enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
 124                CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
 125#ifdef CONFIG_SMC911X
 126        return smc911x_initialize(0, CONFIG_SMC911X_BASE);
 127#else
 128        return 0;
 129#endif
 130}
 131
 132#if defined(CONFIG_MMC_OMAP_HS)
 133int board_mmc_init(bd_t *bis)
 134{
 135        return omap_mmc_init(0, 0, 0, -1, -1);
 136}
 137#endif
 138
 139#ifdef CONFIG_SPL_OS_BOOT
 140/*
 141 * Do board specific preparation before SPL
 142 * Linux boot
 143 */
 144void spl_board_prepare_for_linux(void)
 145{
 146        /* init cs for extern lan */
 147        enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
 148                CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
 149}
 150int spl_start_uboot(void)
 151{
 152        int val = 0;
 153        if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
 154                gpio_direction_input(SPL_OS_BOOT_KEY);
 155                val = gpio_get_value(SPL_OS_BOOT_KEY);
 156                gpio_free(SPL_OS_BOOT_KEY);
 157        }
 158        return val;
 159}
 160#endif
 161