// SPDX-License-Identifier: GPL-2.0
/*
 * (C) Copyright 2015 Google, Inc
 */

#include <common.h>
#include <bitfield.h>
#include <clk-uclass.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <mapmem.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cru_rk3288.h>
#include <asm/arch/grf_rk3288.h>
#include <asm/arch/hardware.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/uclass-internal.h>
#include <linux/log2.h>

DECLARE_GLOBAL_DATA_PTR;

struct rk3288_clk_plat {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
        struct dtd_rockchip_rk3288_cru dtd;
#endif
};

struct pll_div {
        u32 nr;
        u32 nf;
        u32 no;
};

enum {
        VCO_MAX_HZ      = 2200U * 1000000,
        VCO_MIN_HZ      = 440 * 1000000,
        OUTPUT_MAX_HZ   = 2200U * 1000000,
        OUTPUT_MIN_HZ   = 27500000,
        FREF_MAX_HZ     = 2200U * 1000000,
        FREF_MIN_HZ     = 269 * 1000,
};

enum {
        /* PLL CON0 */
        PLL_OD_MASK             = 0x0f,

        /* PLL CON1 */
        PLL_NF_MASK             = 0x1fff,

        /* PLL CON2 */
        PLL_BWADJ_MASK          = 0x0fff,

        /* PLL CON3 */
        PLL_RESET_SHIFT         = 5,

        /* CLKSEL0 */
        CORE_SEL_PLL_SHIFT      = 15,
        CORE_SEL_PLL_MASK       = 1 << CORE_SEL_PLL_SHIFT,
        A17_DIV_SHIFT           = 8,
        A17_DIV_MASK            = 0x1f << A17_DIV_SHIFT,
        MP_DIV_SHIFT            = 4,
        MP_DIV_MASK             = 0xf << MP_DIV_SHIFT,
        M0_DIV_SHIFT            = 0,
        M0_DIV_MASK             = 0xf << M0_DIV_SHIFT,

        /* CLKSEL1: pd bus clk pll sel: codec or general */
        PD_BUS_SEL_PLL_MASK     = 15,
        PD_BUS_SEL_CPLL         = 0,
        PD_BUS_SEL_GPLL,

        /* pd bus pclk div: pclk = pd_bus_aclk /(div + 1) */
        PD_BUS_PCLK_DIV_SHIFT   = 12,
        PD_BUS_PCLK_DIV_MASK    = 7 << PD_BUS_PCLK_DIV_SHIFT,

        /* pd bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
        PD_BUS_HCLK_DIV_SHIFT   = 8,
        PD_BUS_HCLK_DIV_MASK    = 3 << PD_BUS_HCLK_DIV_SHIFT,

        /* pd bus aclk div: pd_bus_aclk = pd_bus_src_clk /(div0 * div1) */
        PD_BUS_ACLK_DIV0_SHIFT  = 3,
        PD_BUS_ACLK_DIV0_MASK   = 0x1f << PD_BUS_ACLK_DIV0_SHIFT,
        PD_BUS_ACLK_DIV1_SHIFT  = 0,
        PD_BUS_ACLK_DIV1_MASK   = 0x7 << PD_BUS_ACLK_DIV1_SHIFT,

        /*
         * CLKSEL10
         * peripheral bus pclk div:
         * aclk_bus: pclk_bus = 1:1 or 2:1 or 4:1 or 8:1
         */
        PERI_SEL_PLL_SHIFT       = 15,
        PERI_SEL_PLL_MASK        = 1 << PERI_SEL_PLL_SHIFT,
        PERI_SEL_CPLL           = 0,
        PERI_SEL_GPLL,

        PERI_PCLK_DIV_SHIFT     = 12,
        PERI_PCLK_DIV_MASK      = 3 << PERI_PCLK_DIV_SHIFT,

        /* peripheral bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
        PERI_HCLK_DIV_SHIFT     = 8,
        PERI_HCLK_DIV_MASK      = 3 << PERI_HCLK_DIV_SHIFT,

        /*
         * peripheral bus aclk div:
         *    aclk_periph = periph_clk_src / (peri_aclk_div_con + 1)
         */
        PERI_ACLK_DIV_SHIFT     = 0,
        PERI_ACLK_DIV_MASK      = 0x1f << PERI_ACLK_DIV_SHIFT,

        /*
         * CLKSEL24
         * saradc_div_con:
         * clk_saradc=24MHz/(saradc_div_con+1)
         */
        CLK_SARADC_DIV_CON_SHIFT        = 8,
        CLK_SARADC_DIV_CON_MASK         = GENMASK(15, 8),
        CLK_SARADC_DIV_CON_WIDTH        = 8,

        SOCSTS_DPLL_LOCK        = 1 << 5,
        SOCSTS_APLL_LOCK        = 1 << 6,
        SOCSTS_CPLL_LOCK        = 1 << 7,
        SOCSTS_GPLL_LOCK        = 1 << 8,
        SOCSTS_NPLL_LOCK        = 1 << 9,
};

#define DIV_TO_RATE(input_rate, div)    ((input_rate) / ((div) + 1))

#define PLL_DIVISORS(hz, _nr, _no) {\
        .nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
        _Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
                       (_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
                       "divisors on line " __stringify(__LINE__));

/* Keep divisors as low as possible to reduce jitter and power usage */
static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);

static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,
                         const struct pll_div *div)
{
        int pll_id = rk_pll_id(clk_id);
        struct rk3288_pll *pll = &cru->pll[pll_id];
        /* All PLLs have same VCO and output frequency range restrictions. */
        uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
        uint output_hz = vco_hz / div->no;

        debug("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
              (uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
        assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
               output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
               (div->no == 1 || !(div->no % 2)));

        /* enter reset */
        rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);

        rk_clrsetreg(&pll->con0, CLKR_MASK | PLL_OD_MASK,
                     ((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
        rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
        rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);

        udelay(10);

        /* return from reset */
        rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);

        return 0;
}

static int rkclk_configure_ddr(struct rk3288_cru *cru, struct rk3288_grf *grf,
                               unsigned int hz)
{
        static const struct pll_div dpll_cfg[] = {
                {.nf = 25, .nr = 2, .no = 1},
                {.nf = 400, .nr = 9, .no = 2},
                {.nf = 500, .nr = 9, .no = 2},
                {.nf = 100, .nr = 3, .no = 1},
        };
        int cfg;

        switch (hz) {
        case 300000000:
                cfg = 0;
                break;
        case 533000000: /* actually 533.3P MHz */
                cfg = 1;
                break;
        case 666000000: /* actually 666.6P MHz */
                cfg = 2;
                break;
        case 800000000:
                cfg = 3;
                break;
        default:
                debug("Unsupported SDRAM frequency");
                return -EINVAL;
        }

        /* pll enter slow-mode */
        rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
                     DPLL_MODE_SLOW << DPLL_MODE_SHIFT);

        rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg]);

        /* wait for pll lock */
        while (!(readl(&grf->soc_status[1]) & SOCSTS_DPLL_LOCK))
                udelay(1);

        /* PLL enter normal-mode */
        rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
                     DPLL_MODE_NORMAL << DPLL_MODE_SHIFT);

        return 0;
}

#ifndef CONFIG_SPL_BUILD
#define VCO_MAX_KHZ     2200000
#define VCO_MIN_KHZ     440000
#define FREF_MAX_KHZ    2200000
#define FREF_MIN_KHZ    269

static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div)
{
        uint ref_khz = OSC_HZ / 1000, nr, nf = 0;
        uint fref_khz;
        uint diff_khz, best_diff_khz;
        const uint max_nr = 1 << 6, max_nf = 1 << 12, max_no = 1 << 4;
        uint vco_khz;
        uint no = 1;
        uint freq_khz = freq_hz / 1000;

        if (!freq_hz) {
                printf("%s: the frequency can not be 0 Hz\n", __func__);
                return -EINVAL;
        }

        no = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
        if (ext_div) {
                *ext_div = DIV_ROUND_UP(no, max_no);
                no = DIV_ROUND_UP(no, *ext_div);
        }

        /* only even divisors (and 1) are supported */
        if (no > 1)
                no = DIV_ROUND_UP(no, 2) * 2;

        vco_khz = freq_khz * no;
        if (ext_div)
                vco_khz *= *ext_div;

        if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || no > max_no) {
                printf("%s: Cannot find out a supported VCO for Frequency (%luHz).\n",
                       __func__, freq_hz);
                return -1;
        }

        div->no = no;

        best_diff_khz = vco_khz;
        for (nr = 1; nr < max_nr && best_diff_khz; nr++) {
                fref_khz = ref_khz / nr;
                if (fref_khz < FREF_MIN_KHZ)
                        break;
                if (fref_khz > FREF_MAX_KHZ)
                        continue;

                nf = vco_khz / fref_khz;
                if (nf >= max_nf)
                        continue;
                diff_khz = vco_khz - nf * fref_khz;
                if (nf + 1 < max_nf && diff_khz > fref_khz / 2) {
                        nf++;
                        diff_khz = fref_khz - diff_khz;
                }

                if (diff_khz >= best_diff_khz)
                        continue;

                best_diff_khz = diff_khz;
                div->nr = nr;
                div->nf = nf;
        }

        if (best_diff_khz > 4 * 1000) {
                printf("%s: Failed to match output frequency %lu, difference is %u Hz, exceed 4MHZ\n",
                       __func__, freq_hz, best_diff_khz * 1000);
                return -EINVAL;
        }

        return 0;
}

static int rockchip_mac_set_clk(struct rk3288_cru *cru, uint freq)
{
        ulong ret;

        /*
         * The gmac clock can be derived either from an external clock
         * or can be generated from internally by a divider from SCLK_MAC.
         */
        if (readl(&cru->cru_clksel_con[21]) & RMII_EXTCLK_MASK) {
                /* An external clock will always generate the right rate... */
                ret = freq;
        } else {
                u32 con = readl(&cru->cru_clksel_con[21]);
                ulong pll_rate;
                u8 div;

                if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) ==
                    EMAC_PLL_SELECT_GENERAL)
                        pll_rate = GPLL_HZ;
                else if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) ==
                         EMAC_PLL_SELECT_CODEC)
                        pll_rate = CPLL_HZ;
                else
                        pll_rate = NPLL_HZ;

                div = DIV_ROUND_UP(pll_rate, freq) - 1;
                if (div <= 0x1f)
                        rk_clrsetreg(&cru->cru_clksel_con[21], MAC_DIV_CON_MASK,
                                     div << MAC_DIV_CON_SHIFT);
                else
                        debug("Unsupported div for gmac:%d\n", div);

                return DIV_TO_RATE(pll_rate, div);
        }

        return ret;
}

static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf,
                                int periph, unsigned int rate_hz)
{
        struct pll_div npll_config = {0};
        u32 lcdc_div;
        int ret;

        ret = pll_para_config(rate_hz, &npll_config, &lcdc_div);
        if (ret)
                return ret;

        rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK,
                     NPLL_MODE_SLOW << NPLL_MODE_SHIFT);
        rkclk_set_pll(cru, CLK_NEW, &npll_config);

        /* waiting for pll lock */
        while (1) {
                if (readl(&grf->soc_status[1]) & SOCSTS_NPLL_LOCK)
                        break;
                udelay(1);
        }

        rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK,
                     NPLL_MODE_NORMAL << NPLL_MODE_SHIFT);

        /* vop dclk source clk: npll,dclk_div: 1 */
        switch (periph) {
        case DCLK_VOP0:
                rk_clrsetreg(&cru->cru_clksel_con[27], 0xff << 8 | 3 << 0,
                             (lcdc_div - 1) << 8 | 2 << 0);
                break;
        case DCLK_VOP1:
                rk_clrsetreg(&cru->cru_clksel_con[29], 0xff << 8 | 3 << 6,
                             (lcdc_div - 1) << 8 | 2 << 6);
                break;
        }

        return 0;
}
#endif /* CONFIG_SPL_BUILD */

static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
        u32 aclk_div;
        u32 hclk_div;
        u32 pclk_div;

        /* pll enter slow-mode */
        rk_clrsetreg(&cru->cru_mode_con,
                     GPLL_MODE_MASK | CPLL_MODE_MASK,
                     GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
                     CPLL_MODE_SLOW << CPLL_MODE_SHIFT);

        /* init pll */
        rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
        rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg);

        /* waiting for pll lock */
        while ((readl(&grf->soc_status[1]) &
                        (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
                        (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
                udelay(1);

        /*
         * pd_bus clock pll source selection and
         * set up dependent divisors for PCLK/HCLK and ACLK clocks.
         */
        aclk_div = GPLL_HZ / PD_BUS_ACLK_HZ - 1;
        assert((aclk_div + 1) * PD_BUS_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
        hclk_div = PD_BUS_ACLK_HZ / PD_BUS_HCLK_HZ - 1;
        assert((hclk_div + 1) * PD_BUS_HCLK_HZ ==
                PD_BUS_ACLK_HZ && (hclk_div < 0x4) && (hclk_div != 0x2));

        pclk_div = PD_BUS_ACLK_HZ / PD_BUS_PCLK_HZ - 1;
        assert((pclk_div + 1) * PD_BUS_PCLK_HZ ==
                PD_BUS_ACLK_HZ && pclk_div < 0x7);

        rk_clrsetreg(&cru->cru_clksel_con[1],
                     PD_BUS_PCLK_DIV_MASK | PD_BUS_HCLK_DIV_MASK |
                     PD_BUS_ACLK_DIV0_MASK | PD_BUS_ACLK_DIV1_MASK,
                     pclk_div << PD_BUS_PCLK_DIV_SHIFT |
                     hclk_div << PD_BUS_HCLK_DIV_SHIFT |
                     aclk_div << PD_BUS_ACLK_DIV0_SHIFT |
                     0 << 0);

        /*
         * peri clock pll source selection and
         * set up dependent divisors for PCLK/HCLK and ACLK clocks.
         */
        aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
        assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);

        hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
        assert((1 << hclk_div) * PERI_HCLK_HZ ==
                PERI_ACLK_HZ && (hclk_div < 0x4));

        pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
        assert((1 << pclk_div) * PERI_PCLK_HZ ==
                PERI_ACLK_HZ && (pclk_div < 0x4));

        rk_clrsetreg(&cru->cru_clksel_con[10],
                     PERI_PCLK_DIV_MASK | PERI_HCLK_DIV_MASK |
                     PERI_ACLK_DIV_MASK,
                     PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
                     pclk_div << PERI_PCLK_DIV_SHIFT |
                     hclk_div << PERI_HCLK_DIV_SHIFT |
                     aclk_div << PERI_ACLK_DIV_SHIFT);

        /* PLL enter normal-mode */
        rk_clrsetreg(&cru->cru_mode_con,
                     GPLL_MODE_MASK | CPLL_MODE_MASK,
                     GPLL_MODE_NORMAL << GPLL_MODE_SHIFT |
                     CPLL_MODE_NORMAL << CPLL_MODE_SHIFT);
}

void rk3288_clk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
        /* pll enter slow-mode */
        rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK,
                     APLL_MODE_SLOW << APLL_MODE_SHIFT);

        rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);

        /* waiting for pll lock */
        while (!(readl(&grf->soc_status[1]) & SOCSTS_APLL_LOCK))
                udelay(1);

        /*
         * core clock pll source selection and
         * set up dependent divisors for MPAXI/M0AXI and ARM clocks.
         * core clock select apll, apll clk = 1800MHz
         * arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz
         */
        rk_clrsetreg(&cru->cru_clksel_con[0],
                     CORE_SEL_PLL_MASK | A17_DIV_MASK | MP_DIV_MASK |
                     M0_DIV_MASK,
                     0 << A17_DIV_SHIFT |
                     3 << MP_DIV_SHIFT |
                     1 << M0_DIV_SHIFT);

        /*
         * set up dependent divisors for L2RAM/ATCLK and PCLK clocks.
         * l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz
         */
        rk_clrsetreg(&cru->cru_clksel_con[37],
                     CLK_L2RAM_DIV_MASK | ATCLK_CORE_DIV_CON_MASK |
                     PCLK_CORE_DBG_DIV_MASK,
                     1 << CLK_L2RAM_DIV_SHIFT |
                     3 << ATCLK_CORE_DIV_CON_SHIFT |
                     3 << PCLK_CORE_DBG_DIV_SHIFT);

        /* PLL enter normal-mode */
        rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK,
                     APLL_MODE_NORMAL << APLL_MODE_SHIFT);
}

/* Get pll rate by id */
static uint32_t rkclk_pll_get_rate(struct rk3288_cru *cru,
                                   enum rk_clk_id clk_id)
{
        uint32_t nr, no, nf;
        uint32_t con;
        int pll_id = rk_pll_id(clk_id);
        struct rk3288_pll *pll = &cru->pll[pll_id];
        static u8 clk_shift[CLK_COUNT] = {
                0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
                GPLL_MODE_SHIFT, NPLL_MODE_SHIFT
        };
        uint shift;

        con = readl(&cru->cru_mode_con);
        shift = clk_shift[clk_id];
        switch ((con >> shift) & CRU_MODE_MASK) {
        case APLL_MODE_SLOW:
                return OSC_HZ;
        case APLL_MODE_NORMAL:
                /* normal mode */
                con = readl(&pll->con0);
                no = ((con & CLKOD_MASK) >> CLKOD_SHIFT) + 1;
                nr = ((con & CLKR_MASK) >> CLKR_SHIFT) + 1;
                con = readl(&pll->con1);
                nf = ((con & CLKF_MASK) >> CLKF_SHIFT) + 1;

                return (24 * nf / (nr * no)) * 1000000;
        case APLL_MODE_DEEP:
        default:
                return 32768;
        }
}

static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint gclk_rate,
                                  int periph)
{
        uint src_rate;
        uint div, mux;
        u32 con;

        switch (periph) {
        case HCLK_EMMC:
        case SCLK_EMMC:
                con = readl(&cru->cru_clksel_con[12]);
                mux = (con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT;
                div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT;
                break;
        case HCLK_SDMMC:
        case SCLK_SDMMC:
                con = readl(&cru->cru_clksel_con[11]);
                mux = (con & MMC0_PLL_MASK) >> MMC0_PLL_SHIFT;
                div = (con & MMC0_DIV_MASK) >> MMC0_DIV_SHIFT;
                break;
        case HCLK_SDIO0:
        case SCLK_SDIO0:
                con = readl(&cru->cru_clksel_con[12]);
                mux = (con & SDIO0_PLL_MASK) >> SDIO0_PLL_SHIFT;
                div = (con & SDIO0_DIV_MASK) >> SDIO0_DIV_SHIFT;
                break;
        default:
                return -EINVAL;
        }

        src_rate = mux == EMMC_PLL_SELECT_24MHZ ? OSC_HZ : gclk_rate;
        return DIV_TO_RATE(src_rate, div);
}

static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate,
                                  int  periph, uint freq)
{
        int src_clk_div;
        int mux;

        debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
        /* mmc clock default div 2 internal, need provide double in cru */
        src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq);

        if (src_clk_div > 0x3f) {
                src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq);
                assert(src_clk_div < 0x40);
                mux = EMMC_PLL_SELECT_24MHZ;
                assert((int)EMMC_PLL_SELECT_24MHZ ==
                       (int)MMC0_PLL_SELECT_24MHZ);
        } else {
                mux = EMMC_PLL_SELECT_GENERAL;
                assert((int)EMMC_PLL_SELECT_GENERAL ==
                       (int)MMC0_PLL_SELECT_GENERAL);
        }
        switch (periph) {
        case HCLK_EMMC:
        case SCLK_EMMC:
                rk_clrsetreg(&cru->cru_clksel_con[12],
                             EMMC_PLL_MASK | EMMC_DIV_MASK,
                             mux << EMMC_PLL_SHIFT |
                             (src_clk_div - 1) << EMMC_DIV_SHIFT);
                break;
        case HCLK_SDMMC:
        case SCLK_SDMMC:
                rk_clrsetreg(&cru->cru_clksel_con[11],
                             MMC0_PLL_MASK | MMC0_DIV_MASK,
                             mux << MMC0_PLL_SHIFT |
                             (src_clk_div - 1) << MMC0_DIV_SHIFT);
                break;
        case HCLK_SDIO0:
        case SCLK_SDIO0:
                rk_clrsetreg(&cru->cru_clksel_con[12],
                             SDIO0_PLL_MASK | SDIO0_DIV_MASK,
                             mux << SDIO0_PLL_SHIFT |
                             (src_clk_div - 1) << SDIO0_DIV_SHIFT);
                break;
        default:
                return -EINVAL;
        }

        return rockchip_mmc_get_clk(cru, gclk_rate, periph);
}

static ulong rockchip_spi_get_clk(struct rk3288_cru *cru, uint gclk_rate,
                                  int periph)
{
        uint div, mux;
        u32 con;

        switch (periph) {
        case SCLK_SPI0:
                con = readl(&cru->cru_clksel_con[25]);
                mux = (con & SPI0_PLL_MASK) >> SPI0_PLL_SHIFT;
                div = (con & SPI0_DIV_MASK) >> SPI0_DIV_SHIFT;
                break;
        case SCLK_SPI1:
                con = readl(&cru->cru_clksel_con[25]);
                mux = (con & SPI1_PLL_MASK) >> SPI1_PLL_SHIFT;
                div = (con & SPI1_DIV_MASK) >> SPI1_DIV_SHIFT;
                break;
        case SCLK_SPI2:
                con = readl(&cru->cru_clksel_con[39]);
                mux = (con & SPI2_PLL_MASK) >> SPI2_PLL_SHIFT;
                div = (con & SPI2_DIV_MASK) >> SPI2_DIV_SHIFT;
                break;
        default:
                return -EINVAL;
        }
        assert(mux == SPI0_PLL_SELECT_GENERAL);

        return DIV_TO_RATE(gclk_rate, div);
}

static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint gclk_rate,
                                  int periph, uint freq)
{
        int src_clk_div;

        debug("%s: clk_general_rate=%u\n", __func__, gclk_rate);
        src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
        assert(src_clk_div < 128);
        switch (periph) {
        case SCLK_SPI0:
                rk_clrsetreg(&cru->cru_clksel_con[25],
                             SPI0_PLL_MASK | SPI0_DIV_MASK,
                             SPI0_PLL_SELECT_GENERAL << SPI0_PLL_SHIFT |
                             src_clk_div << SPI0_DIV_SHIFT);
                break;
        case SCLK_SPI1:
                rk_clrsetreg(&cru->cru_clksel_con[25],
                             SPI1_PLL_MASK | SPI1_DIV_MASK,
                             SPI1_PLL_SELECT_GENERAL << SPI1_PLL_SHIFT |
                             src_clk_div << SPI1_DIV_SHIFT);
                break;
        case SCLK_SPI2:
                rk_clrsetreg(&cru->cru_clksel_con[39],
                             SPI2_PLL_MASK | SPI2_DIV_MASK,
                             SPI2_PLL_SELECT_GENERAL << SPI2_PLL_SHIFT |
                             src_clk_div << SPI2_DIV_SHIFT);
                break;
        default:
                return -EINVAL;
        }

        return rockchip_spi_get_clk(cru, gclk_rate, periph);
}

static ulong rockchip_saradc_get_clk(struct rk3288_cru *cru)
{
        u32 div, val;

        val = readl(&cru->cru_clksel_con[24]);
        div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
                               CLK_SARADC_DIV_CON_WIDTH);

        return DIV_TO_RATE(OSC_HZ, div);
}

static ulong rockchip_saradc_set_clk(struct rk3288_cru *cru, uint hz)
{
        int src_clk_div;

        src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
        assert(src_clk_div < 128);

        rk_clrsetreg(&cru->cru_clksel_con[24],
                     CLK_SARADC_DIV_CON_MASK,
                     src_clk_div << CLK_SARADC_DIV_CON_SHIFT);

        return rockchip_saradc_get_clk(cru);
}

static ulong rk3288_clk_get_rate(struct clk *clk)
{
        struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
        ulong new_rate, gclk_rate;

        gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
        switch (clk->id) {
        case 0 ... 63:
                new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
                break;
        case HCLK_EMMC:
        case HCLK_SDMMC:
        case HCLK_SDIO0:
        case SCLK_EMMC:
        case SCLK_SDMMC:
        case SCLK_SDIO0:
                new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id);
                break;
        case SCLK_SPI0:
        case SCLK_SPI1:
        case SCLK_SPI2:
                new_rate = rockchip_spi_get_clk(priv->cru, gclk_rate, clk->id);
                break;
        case PCLK_I2C0:
        case PCLK_I2C1:
        case PCLK_I2C2:
        case PCLK_I2C3:
        case PCLK_I2C4:
        case PCLK_I2C5:
                return gclk_rate;
        case PCLK_PWM:
                return PD_BUS_PCLK_HZ;
        case SCLK_SARADC:
                new_rate = rockchip_saradc_get_clk(priv->cru);
                break;
        default:
                return -ENOENT;
        }

        return new_rate;
}

static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
{
        struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
        struct rk3288_cru *cru = priv->cru;
        ulong new_rate, gclk_rate;

        gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
        switch (clk->id) {
        case PLL_APLL:
                /* We only support a fixed rate here */
                if (rate != 1800000000)
                        return -EINVAL;
                rk3288_clk_configure_cpu(priv->cru, priv->grf);
                new_rate = rate;
                break;
        case CLK_DDR:
                new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate);
                break;
        case HCLK_EMMC:
        case HCLK_SDMMC:
        case HCLK_SDIO0:
        case SCLK_EMMC:
        case SCLK_SDMMC:
        case SCLK_SDIO0:
                new_rate = rockchip_mmc_set_clk(cru, gclk_rate, clk->id, rate);
                break;
        case SCLK_SPI0:
        case SCLK_SPI1:
        case SCLK_SPI2:
                new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate);
                break;
#ifndef CONFIG_SPL_BUILD
        case SCLK_MAC:
                new_rate = rockchip_mac_set_clk(priv->cru, rate);
                break;
        case DCLK_VOP0:
        case DCLK_VOP1:
                new_rate = rockchip_vop_set_clk(cru, priv->grf, clk->id, rate);
                break;
        case SCLK_EDP_24M:
                /* clk_edp_24M source: 24M */
                rk_setreg(&cru->cru_clksel_con[28], 1 << 15);

                /* rst edp */
                rk_setreg(&cru->cru_clksel_con[6], 1 << 15);
                udelay(1);
                rk_clrreg(&cru->cru_clksel_con[6], 1 << 15);
                new_rate = rate;
                break;
        case ACLK_VOP0:
        case ACLK_VOP1: {
                u32 div;

                /* vop aclk source clk: cpll */
                div = CPLL_HZ / rate;
                assert((div - 1 < 64) && (div * rate == CPLL_HZ));

                switch (clk->id) {
                case ACLK_VOP0:
                        rk_clrsetreg(&cru->cru_clksel_con[31],
                                     3 << 6 | 0x1f << 0,
                                     0 << 6 | (div - 1) << 0);
                        break;
                case ACLK_VOP1:
                        rk_clrsetreg(&cru->cru_clksel_con[31],
                                     3 << 14 | 0x1f << 8,
                                     0 << 14 | (div - 1) << 8);
                        break;
                }
                new_rate = rate;
                break;
        }
        case PCLK_HDMI_CTRL:
                /* enable pclk hdmi ctrl */
                rk_clrreg(&cru->cru_clkgate_con[16], 1 << 9);

                /* software reset hdmi */
                rk_setreg(&cru->cru_clkgate_con[7], 1 << 9);
                udelay(1);
                rk_clrreg(&cru->cru_clkgate_con[7], 1 << 9);
                new_rate = rate;
                break;
#endif
        case SCLK_SARADC:
                new_rate = rockchip_saradc_set_clk(priv->cru, rate);
                break;
        case PLL_GPLL:
        case PLL_CPLL:
        case PLL_NPLL:
        case ACLK_CPU:
        case HCLK_CPU:
        case PCLK_CPU:
        case ACLK_PERI:
        case HCLK_PERI:
        case PCLK_PERI:
        case SCLK_UART0:
                return 0;
        default:
                return -ENOENT;
        }

        return new_rate;
}

static int __maybe_unused rk3288_gmac_set_parent(struct clk *clk, struct clk *parent)
{
        struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
        struct rk3288_cru *cru = priv->cru;
        const char *clock_output_name;
        int ret;

        /*
         * If the requested parent is in the same clock-controller and
         * the id is SCLK_MAC_PLL ("mac_pll_src"), switch to the internal
         * clock.
         */
        if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_PLL)) {
                debug("%s: switching GAMC to SCLK_MAC_PLL\n", __func__);
                rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK, 0);
                return 0;
        }

        /*
         * Otherwise, we need to check the clock-output-names of the
         * requested parent to see if the requested id is "ext_gmac".
         */
        ret = dev_read_string_index(parent->dev, "clock-output-names",
                                    parent->id, &clock_output_name);
        if (ret < 0)
                return -ENODATA;

        /* If this is "ext_gmac", switch to the external clock input */
        if (!strcmp(clock_output_name, "ext_gmac")) {
                debug("%s: switching GMAC to external clock\n", __func__);
                rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK,
                             RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT);
                return 0;
        }

        return -EINVAL;
}

static int __maybe_unused rk3288_clk_set_parent(struct clk *clk, struct clk *parent)
{
        switch (clk->id) {
        case SCLK_MAC:
                return rk3288_gmac_set_parent(clk, parent);
        case SCLK_USBPHY480M_SRC:
                return 0;
        }

        debug("%s: unsupported clk %ld\n", __func__, clk->id);
        return -ENOENT;
}

static int rk3288_clk_enable(struct clk *clk)
{
        switch (clk->id) {
        case HCLK_USBHOST0:
        case HCLK_HSIC:
                return 0;

        case SCLK_MAC:
        case SCLK_MAC_RX:
        case SCLK_MAC_TX:
        case SCLK_MACREF:
        case SCLK_MACREF_OUT:
        case ACLK_GMAC:
        case PCLK_GMAC:
                /* Required to successfully probe the Designware GMAC driver */
                return 0;
        }

        debug("%s: unsupported clk %ld\n", __func__, clk->id);
        return -ENOENT;
}

static struct clk_ops rk3288_clk_ops = {
        .get_rate       = rk3288_clk_get_rate,
        .set_rate       = rk3288_clk_set_rate,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
        .set_parent     = rk3288_clk_set_parent,
#endif
        .enable = rk3288_clk_enable,
};

static int rk3288_clk_ofdata_to_platdata(struct udevice *dev)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
        struct rk3288_clk_priv *priv = dev_get_priv(dev);

        priv->cru = dev_read_addr_ptr(dev);
#endif

        return 0;
}

static int rk3288_clk_probe(struct udevice *dev)
{
        struct rk3288_clk_priv *priv = dev_get_priv(dev);
        bool init_clocks = false;

        priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
        if (IS_ERR(priv->grf))
                return PTR_ERR(priv->grf);
#ifdef CONFIG_SPL_BUILD
#if CONFIG_IS_ENABLED(OF_PLATDATA)
        struct rk3288_clk_plat *plat = dev_get_platdata(dev);

        priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
        init_clocks = true;
#endif
        if (!(gd->flags & GD_FLG_RELOC)) {
                u32 reg;

                /*
                 * Init clocks in U-Boot proper if the NPLL is runnning. This
                 * indicates that a previous boot loader set up the clocks, so
                 * we need to redo it. U-Boot's SPL does not set this clock.
                 */
                reg = readl(&priv->cru->cru_mode_con);
                if (((reg & NPLL_MODE_MASK) >> NPLL_MODE_SHIFT) ==
                                NPLL_MODE_NORMAL)
                        init_clocks = true;
        }

        if (init_clocks)
                rkclk_init(priv->cru, priv->grf);

        return 0;
}

static int rk3288_clk_bind(struct udevice *dev)
{
        int ret;
        struct udevice *sys_child;
        struct sysreset_reg *priv;

        /* The reset driver does not have a device node, so bind it here */
        ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
                                 &sys_child);
        if (ret) {
                debug("Warning: No sysreset driver: ret=%d\n", ret);
        } else {
                priv = malloc(sizeof(struct sysreset_reg));
                priv->glb_srst_fst_value = offsetof(struct rk3288_cru,
                                                    cru_glb_srst_fst_value);
                priv->glb_srst_snd_value = offsetof(struct rk3288_cru,
                                                    cru_glb_srst_snd_value);
                sys_child->priv = priv;
        }

#if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)
        ret = offsetof(struct rk3288_cru, cru_softrst_con[0]);
        ret = rockchip_reset_bind(dev, ret, 12);
        if (ret)
                debug("Warning: software reset driver bind faile\n");
#endif

        return 0;

}

static const struct udevice_id rk3288_clk_ids[] = {
        { .compatible = "rockchip,rk3288-cru" },
        { }
};

U_BOOT_DRIVER(rockchip_rk3288_cru) = {
        .name           = "rockchip_rk3288_cru",
        .id             = UCLASS_CLK,
        .of_match       = rk3288_clk_ids,
        .priv_auto_alloc_size = sizeof(struct rk3288_clk_priv),
        .platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat),
        .ops            = &rk3288_clk_ops,
        .bind           = rk3288_clk_bind,
        .ofdata_to_platdata     = rk3288_clk_ofdata_to_platdata,
        .probe          = rk3288_clk_probe,
};