LXR uboot/include/configs/axs10x.h

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
   4 */
   5
   6#ifndef _CONFIG_AXS10X_H_
   7#define _CONFIG_AXS10X_H_
   8
   9#include <linux/sizes.h>
  10/*
  11 *  CPU configuration
  12 */
  13#define ARC_FPGA_PERIPHERAL_BASE        0xE0000000
  14#define ARC_APB_PERIPHERAL_BASE         0xF0000000
  15#define ARC_DWMMC_BASE                  (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
  16#define ARC_DWGMAC_BASE                 (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
  17
  18/*
  19 * Memory configuration
  20 */
  21#define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
  22
  23#define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  24#define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  25#define CONFIG_SYS_SDRAM_SIZE           SZ_512M
  26
  27#define CONFIG_SYS_INIT_SP_ADDR         \
  28        (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
  29
  30#define CONFIG_SYS_MALLOC_LEN           SZ_2M
  31#define CONFIG_SYS_BOOTM_LEN            SZ_128M
  32#define CONFIG_SYS_LOAD_ADDR            0x82000000
  33
  34/*
  35 * This board might be of different versions so handle it
  36 */
  37#define CONFIG_BOARD_TYPES
  38
  39/*
  40 * NAND Flash configuration
  41 */
  42#define CONFIG_SYS_NAND_BASE            (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
  43#define CONFIG_SYS_MAX_NAND_DEVICE      1
  44
  45/*
  46 * UART configuration
  47 */
  48#define CONFIG_DW_SERIAL
  49#define CONFIG_SYS_NS16550_SERIAL
  50#define CONFIG_SYS_NS16550_CLK          33333333
  51#define CONFIG_SYS_NS16550_MEM32
  52
  53/*
  54 * Ethernet PHY configuration
  55 */
  56
  57/*
  58 * USB 1.1 configuration
  59 */
  60#define CONFIG_USB_OHCI_NEW
  61#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
  62
  63/*
  64 * Environment settings
  65 */
  66#define CONFIG_ENV_SIZE                 SZ_16K
  67#define CONFIG_EXTRA_ENV_SETTINGS \
  68        "upgrade=if mmc rescan && " \
  69                "fatload mmc 0:1 ${loadaddr} u-boot-update.img && " \
  70                "iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \
  71                "\"Fail to upgrade.\n" \
  72                "Do you have u-boot-update.img and u-boot.head on first (FAT) SD card partition?\"" \
  73                "; fi\0"
  74
  75/*
  76 * Environment configuration
  77 */
  78#define CONFIG_BOOTFILE                 "uImage"
  79#define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
  80
  81/*
  82 * Console configuration
  83 */
  84
  85/*
  86 * Misc utility configuration
  87 */
  88#define CONFIG_BOUNCE_BUFFER
  89
  90#endif /* _CONFIG_AXS10X_H_ */
  91