LXR uboot/include/configs/colibri

   1/* SPDX-License-Identifier: GPL-2.0+ */
   2/*
   3 * Copyright 2015-2016 Toradex, Inc.
   4 *
   5 * Configuration settings for the Toradex VF50/VF61 modules.
   6 *
   7 * Based on vf610twr.h:
   8 * Copyright 2013 Freescale Semiconductor, Inc.
   9 */
  10
  11#ifndef __CONFIG_H
  12#define __CONFIG_H
  13
  14#include <asm/arch/imx-regs.h>
  15
  16#define CONFIG_SYS_FSL_CLK
  17
  18#define CONFIG_SKIP_LOWLEVEL_INIT
  19
  20#ifdef CONFIG_CMD_FUSE
  21#define CONFIG_MXC_OCOTP
  22#endif
  23
  24#ifdef CONFIG_VIDEO_FSL_DCU_FB
  25#define CONFIG_SPLASH_SCREEN_ALIGN
  26#define CONFIG_VIDEO_LOGO
  27#define CONFIG_VIDEO_BMP_LOGO
  28#define CONFIG_SYS_FSL_DCU_LE
  29
  30#define CONFIG_SYS_DCU_ADDR             DCU0_BASE_ADDR
  31#define DCU_LAYER_MAX_NUM               64
  32#endif
  33
  34/* Size of malloc() pool */
  35#define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  36
  37/* Allow to overwrite serial and ethaddr */
  38#define CONFIG_ENV_OVERWRITE
  39
  40/* NAND support */
  41#define CONFIG_SYS_NAND_ONFI_DETECTION
  42#define CONFIG_SYS_MAX_NAND_DEVICE      1
  43#define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  44
  45/* Dynamic MTD partition support */
  46
  47#define CONFIG_SYS_FSL_ESDHC_ADDR       0
  48#define CONFIG_SYS_FSL_ESDHC_NUM        1
  49
  50#define CONFIG_FEC_MXC
  51#define IMX_FEC_BASE                    ENET1_BASE_ADDR
  52#define CONFIG_FEC_XCV_TYPE             RMII
  53#define CONFIG_FEC_MXC_PHYADDR          0
  54
  55#define CONFIG_IPADDR           192.168.10.2
  56#define CONFIG_NETMASK          255.255.255.0
  57#define CONFIG_SERVERIP         192.168.10.1
  58
  59#define CONFIG_LOADADDR                 0x80008000
  60#define CONFIG_FDTADDR                  0x84000000
  61
  62/* We boot from the gfxRAM area of the OCRAM. */
  63#define CONFIG_BOARD_SIZE_LIMIT         520192
  64
  65#define SD_BOOTCMD \
  66        "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  67        "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  68        "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  69        "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  70        "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
  71        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  72
  73#define NFS_BOOTCMD \
  74        "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  75        "nfsboot=run setup; " \
  76        "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
  77        "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  78        "dhcp ${kernel_addr_r} && "     \
  79        "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  80        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  81
  82#define UBI_BOOTCMD     \
  83        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  84        "ubi.fm_autoconvert=1\0" \
  85        "ubiboot=run setup; " \
  86        "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
  87        "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  88        "ubi part ubi && " \
  89        "ubi read ${kernel_addr_r} kernel && " \
  90        "ubi read ${fdt_addr_r} dtb && " \
  91        "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  92
  93#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
  94
  95#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
  96
  97#define CONFIG_EXTRA_ENV_SETTINGS \
  98        "kernel_addr_r=0x82000000\0" \
  99        "fdt_addr_r=0x84000000\0" \
 100        "kernel_file=zImage\0" \
 101        "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 102        "fdt_board=eval-v3\0" \
 103        "fdt_fixup=;\0" \
 104        "defargs=\0" \
 105        "console=ttyLP0\0" \
 106        "setup=setenv setupargs " \
 107        "console=tty1 console=${console}" \
 108        ",${baudrate}n8 ${memargs}\0" \
 109        "setsdupdate=mmc rescan && set interface mmc && " \
 110        "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 111        "source ${loadaddr}\0" \
 112        "setusbupdate=usb start && set interface usb && " \
 113        "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 114        "source ${loadaddr}\0" \
 115        "setupdate=run setsdupdate || run setusbupdate\0" \
 116        "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 117        "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 118        "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
 119        "splashpos=m,m\0" \
 120        SD_BOOTCMD \
 121        NFS_BOOTCMD \
 122        UBI_BOOTCMD
 123
 124/* Miscellaneous configurable options */
 125#define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 126#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 127
 128#define CONFIG_SYS_MEMTEST_START        0x80010000
 129#define CONFIG_SYS_MEMTEST_END          0x87C00000
 130
 131#define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 132#define CONFIG_SYS_HZ                   1000
 133
 134/* Physical memory map */
 135#define PHYS_SDRAM                      (0x80000000)
 136#define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 137
 138#define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 139#define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 140#define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 141
 142#define CONFIG_SYS_INIT_SP_OFFSET \
 143        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 144#define CONFIG_SYS_INIT_SP_ADDR \
 145        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 146
 147/* Environment organization */
 148
 149#ifdef CONFIG_ENV_IS_IN_MMC
 150#define CONFIG_SYS_MMC_ENV_DEV          0
 151#define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 152#define CONFIG_ENV_SIZE                 (8 * 1024)
 153#endif
 154
 155#ifdef CONFIG_ENV_IS_IN_NAND
 156#define CONFIG_ENV_SIZE                 (64 * 2048)
 157#define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 158#define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 159#endif
 160
 161/* USB Host Support */
 162#define CONFIG_USB_EHCI_VF
 163#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 164#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 165
 166/* USB DFU */
 167#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 168
 169/* USB Storage */
 170
 171#endif /* __CONFIG_H */
 172